Tender For Carrying Out Structural Work At Bpcl Jammu Cuf; 1 Fabrication and erection in position; bolted and/or welded structural steel works at all levels; including all built-up sections/compound sections made out of rolled sections and / or platesintrusses; rafters; purlins; wind ties; coloumns; portals; platforms;staircases; (excluding chequered plates, swing ladders, foundation bolts and gratings) ladders; stoppers; brackets sag rods; supportsforequipment and accessories; hand railings posts cutting to requiredsize as per approved drawings; straightening if required bolting/welding of joints (including sealing the joints of the box sections with continuous welding wherever specified) finishing edges by grinding;fixing in lineand level with temporary staging and removal of same aftererection; including preparation of detailed fabrication drawings, and as built drawing, complete in all respect as directed byEngineer-in-charge. NOTE : 1. All structural steel shall conform to IS-2062 & IS-808 and of SAIL/TISCO/IISCO/ JINDAL/ ESSAR/ VIZAG STEEL or equivalent make withprior approval from BPCL only.(Structural Steel and erection Bolt shall be Supplied by BANDR) 2. The structure may be Pre-fabricated with bolting arrangements by making necessary holes, Min. hot works will be allowed at site. It is vendors responsibility to verify the actual measurements at site before makingthe bolting shedule. The rate includes the cost of materials (Except Structural steel, l shall be Supplied by BANDR), consumables, labour, tools andplants,transportation, loading, unloading of structural material from trailer & shifting infabrication yard, painting yard and taking from painting yard to fabrication, erection sitemachinery, safety requirents,incidental charges, if any, all complete. KG 263260.00 ₹ 30.00 7897800.00 2 Fabrication and laying of 6mm/8mm thick chequered plates of specifiedthickness on trenches/ openings etc.including cutting to required shape and size,fabricating and weldingholding lugs. The rate includes the cost of materials, consumables, labour, tools andplants,transportation, loading, unloading, machinery, safety requirents,incidental charges if any, all complete. KG 3000.00 ₹ 24.00 72000.00 3 Erecting in position bolted and/ or weldedhot dipped galvanised grating (fabricated as per BPCL standarddrawing) made out of MS flats, tor steel clamps inwalkways, platforms, stair case treads etc. including cutting torequired size,shape, making hole of required size, making the edgessmooth, removing the burrs, getting it galvanised by cold glavanized method. fabrication,fixing with galvanised clamps etc all completed as specifiedanddirected. Average mass of galvanizing should be min. 610gm/m2conforming to IS code 4759. All consumable including loading & unloading work, material to be supplied by contractor. 4 GALVALUME SHEET ROOFING COLOUR COATED HI PROFILE SHEETING fixing permanently colour coated hi rib profiled sheets of rib depth 28- 30mm with 190 - 250 mm pitch distance. Hi profiled sheets shall beminimum 0.5 TCT galvalume or zincalume steel sheet having minimum yieldstrengthof 550 Mpa, with a coating of mass of minimum 150 gsm (AluminiumZincalloy). The sheet shall also have a backcoatof 5 microns on reverse side over 5 microns primer coat. The sheetshallbe fixed over the purlins with hexagonal head self drillingfasteners of12 - 14 x 55 mm long including neoprene/EPDM washer on eachcrest ofsheet. The maximum end lap of sheet shall be 150 mm and sealedwithsilicon sealent. The work shall include of all labour, equipments ,materials, preparation of detailed fabrication drawing & as built drawing, cost of consumables and scaffolding all level include documeting after completion of work. Payment would be made on the basis of roof area covered by the sheets. This item includes for lovers, claddings, roof light openings, etc.,allcomplete as directed by the engineer in charge. Overlaps shall not bepaid. M2 1600.00 ₹ 360.00 576000.00 5 GALVALUME RIDGE ROOFING COLOUR COATED HI PROFILE RIDGE fixing of colourcoated hi profile ridge matching with hi rib profiled sheets ofrib depth 28 - 30mm with 190 - 250 mm pitch distance. Hi profiled sheetsshall be minimum 0.5 TCT galvalume or zincalume steel sheet havingminimum yield strengthof 550 Mpa, with a coating of mass of minimum 150gsm (Aluminium Zincalloy). The sheet shallbe fixed over the purlins with hexagonal head selfdrilling fasteners of12 - 14 x 55 mm long including neoprene/EPDM washeron each crest ofsheet. The maximum end lap of sheet shall be 150 mm andsealed withsilicon sealent. The work shall include of all labour,equipments,materials, preparation of detailed fabrication drawing & as built drawing, cost of consumables and scaffolding all level include documeting after completion of work., cost of consumables,fasteners,washers etc. Payment would be made on the basis of roof areacovered bythe sheets. This item includes for lovers, claddings, roof light openings, etc.,allcomplete as directed by the engineer in charge. Overlaps shall not bepaid. M 100.00 ₹ 22.00 2200.00 6 Fixing MS railing works using squares, flats, bars,rounds, hollow sections (Medium grade tubes conforming to IS 1239) etc.and fixing rigidly to the floor / wall / concrete surface with MS lugsand plate embedded in concrete 1:1.5:3, complete at all heights and levels as per drawings, specifications and instructions of the Engineer Incharge. KG 10000.00 ₹ 36.00 360000.00 7 TRANSLUCENT SHEET Fixing at all levels 6mm thick approved make corrugated translucent polycarbonate sheets of approved colour including fixingusing GI hooks & bolts, clamps,bitumen washers, etc complete in all respect as per scope covered for galvalume sheet & galvalume Ridge. M2 500.00 ₹ 360.00 180000.00 1. Area lighting arrangement at site including Construction Power and Water. √ 2. All necessary Equipment’s & machineries tools and tackles including Operator & POL √ 3. All the equipment & machineries required for work shall be calibrated up to date by the successful bidder √ 4. Structural Steel & Sheeting Material √ 5. All necessary testing at Approved Lab / Govt. recognized college related to soil investigation work & submission of final reports √ 7. All required consumable materials like welding electrodes, LPG gas, Oxygen gas etc. necessary to complete the work in all respect √ 8. All required PPEs including Safety Shoe, Helmet, Gloves etc. √ 9. All kinds of transportation, handling of the materials √ 10. Preparation of detail drawing for structural work including submission of built drawing. √ 11. Watch & Ward of the materials both from B AND R and the Agency √ √
