Supply Installation Testing And Commissioning Of 20 Hp Submersible Pump Set With Allied Electrical And Mechanical Equipment At Ranney Well No A2 Yamuna Flood Plain Area Ward No5 Baktawarpur Ac 01, Delhi-Delhi

supply installation testing and commissioning Of 20 Hp Submersible Pump Set With Allied electrical and mechanical Equipment At Ranney Well No A2 Yamuna Flood Plain Area Ward No5 Baktawarpur Ac 01- 1 Supply submersible pump set fitted with dynamically balanced SS impeller mounted on stainless steel shaft protective sleeves. The pump set directly coupled with submersible motor having normal speed of 2900 RPM, 50 HZ, Three phase, 415 Volt, A.C supply Discharge in LPM: 1200 LPM MinimumHead in Mtr. : 50Outlet in mm : 100 mmHP: 20Stage : 03/4Make : BS/KSB/Approved make of DJB 2 Supply of PMC based star delta Starter panel board suitable for 20 HP Submersible Pump Set for tube wells having following specifications :- 1. Three phase, Star Delta Motor Control Panel, 415 VAC 50 HZ.2. Digital controlling of parameters i.e Ampere and voltage.3. PMC Based DC operated 100 Amp. power contractors. 4. Digital Display for Parameters i.e Ampere and voltage & Motor Run Hour.5. Automatically over load cut off.6. Under voltage/over voltage automatically cut off.7. Single phase and reverse phase protection.8. Auto/manual mode selector switch.9. MCCB- 100 AMP at incomer to interrupt the supply in faulty condition.10. Programmable Timer, 220 volt AC for auto start and stop.11. Run hour meter to show the total time of run.12. LED Indication – R Y B.13. Having locking arrangement and door with gasket.14. GPSP fabricated, powder coated IP 56 protection panel box. Make of panel- Any approved make in DJB 3 Making/Supply of 3 mtr. long 100 mm dia. double flanged MS pipe having 3 no. L-type brackets duly welded on each side of flange. The flanges having four holes and cut for cable. Make of pipe - Jindal/Tata. 4 Making/Supply of 3 mtr. long 100 mm dia. double flanged MS pipe having 3 no. L-type brackets duly welded on each side of flange. Make of pipe - Jindal/Tata. 5 Making/Supply of 1.5 mtr. long 100 mm dia. double flanged B Class MS pipe having 3 no. L-type brackets duly welded on each side of flange. Make of pipe - Jindal/Tata. 6 Making/Supply of 1 mtr. long 100 mm dia. double flanged B Class MS pipe having 3 no. L-type brackets duly welded on each side of flange. Make of pipe - Jindal/Tata. 7 Supply of three core 6 Sq. mm flat submersible cable with copper conductor insulated and sheathed with PVC for submersible pump motors with voltage grade upto 1100 volts conforming to and marked with IS694:2010. Make – Finolex/Havells/Grandley/ Any other approved Make in DJB. 8 Supply of CIsluice valve , non rising S.S. spindle, D/F P.N 1.6 of size 100 mmMake:- Kirloskar /IVC 9 Supply of NRV 100 mm dia CI double flanges PN1.6 Make:-Kirloskar /IVC or any other make approved by DJB. 10 Supply/making of Tail piece made out from 100 mm G.I Pipe 500 mm long with one end threaded as per outlet of pump and another end flange as per size of 100 mm pipe. Make of Pipe – Tata/Jindal. 11 Supply of M.S. bend of 100 mm dia, 900 heavy duty. 12 Supply for heavy duty M.S Clamp in two pieces having two nos. of holes in each piece suitable for holding 100 mm fitting. 13 Supply of Neoprene Rubber Packing sheet Having 50% neoprene, 3mm thickness. Make: Jyoti/ Worth. 14 Supply of Nut bolt & Washer of required size. 15 Making opening provision on the top of well by cutting existing sheets and providing and fixing a MS frame of the top of well by the help of cutter and welding machine for providing strength to bear the weight of pump set and pipe fitting. 16 Installation/lowering of all E&M equipment’s listed at sr. no.-1 to 15 and in deep well with required material handling equipment’s with all safety precautions for installation in the deep well by the help of heavy labour. The job includes erection the complete pipeline with hardware equipment’s on each joint. The job includes connecting the delivery line of the submersible pump with the existing header line by the help of, welding, cutting and nut bolting and also includes arrangement of other required material and tool and tackles for connecting in proper manure. This job also includes Fixing all above electrical items, laying of cables & making all electrical connections at Starter panel board with the help of thimbing & taping in all respect with the help of skilled labor as per instruction of Engineer in Charge.

INR 500 /-

INR 8400.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB