Tender For Provn Of 12 X 10 Toilet Block Near Rhq Of Cif(R) Sig Regt Under Age(I) Cif (R); 1 Excavation in trenches in any type of soil n. exc 1.5m wide & n. exc 1.50m in depth for foundations for shafts, wells, cesspits, manholes, pier holes & getting out complete all as specified and directed 2 Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. 3 M&L for providing reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and as directed 4 Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 5 Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed. 6 M&L for providing reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) as in column , pillars, piers,posts and strutscomplete all as specified and as directed 7 M & L brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 etc, all as spcified and direcrted. 8 M & L Brick work with sub-class `B bricks,old size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, all as spcified and direcrted. 9 M & Lfor 40mm thick damp proof coarsein cement concrete (1:2:4) type B-0(using 12.5 mmgradedstone aggregate) using water proofing compound ,to horizontal or vertical surface including use of necessary form work , complete all as specified 10 M & Lfor providing reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) as Beams, cantilevers,bressummers, lintels over1.5m spancomplete all as specified and as directed 11 M&L for providing reinforced cement concrete (design mix) M-25 (using 20mm graded stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the likecomplete all as specified and as directed 12 M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flatfor rough finished surfaces of concrete etc. 13 M & L Formwork to sides of pillars ,posts, struts, piers, columns and stanchion etc for rough finished surfaces of concrete etc. 14 M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flatfor rough finished surfaces of concrete etc. 15 M & L Form work to soffits of suspended slabs such as roof slab, floor slab and similar work not exceeding 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed.. 16 M & L Form work to edges of RCC roof slab, floor slab and similar work not exceeding 200mm thick for rough finished surfaces of concrete flat complete all as specified and directed.. 17 M&L mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. 18 Material andlabour mild steel TMT bars, 6 to8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. 19 Mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including crancking, bendingspirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 MM dia or securing with clipsall as specified and directed. 20 Rendering 15mm thick cement plaster on stone masonry surfaces or other than fair faces of brick work CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. 21 M&L for preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified. 22 M&L for 10 mm thick rendering on fair faces of brick workin cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified. 23 Material and labour for three coat of white wash on newly plastered surfaces of wall including preparation ofsurfaces complete all as specified and directed 24 Material and Labour for 5mm thick cement plaster in CM (1:4) to ceiling surfaceand finished the surface even and smooth without using extra cement complete all as specified. 25 Material and labour for three coat of white wash on newly plastered surface of ceiling including preparation of ceiling surfaces complete all as specified and directed 26 Material & Labour for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 10mm thick in cement mortar (1:4) base, complete all as specified. 27 M&L for glazed ceramic coloured designer tiles 450 x 300x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete over 10 mm thick rendering in CM 1:3all as specified and directed. 28 M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed. 29 M&L 50mm thick PCC(1:2:4)type B-1 (using 20mm graded coarse aggregate) over75mm thick PCC(1:3:6)type C-2 (using 40mm graded coarse aggregate ) laid to an outward slope 1:12 as in plinth protection complete all as specified and directed. 30 Sand filling under floors or in foundationincluding watering and consolidation 31 Material and labour for plain cement concrete 1:5:10 type E-2 (using 40 mm gradedaggregate), as in foundation filling and mass concrete, complete all as specified and directed. 32 Supplyand fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical numberand minimum 02 Nos. for horizontal member), complete all as specified and directed. 33 Supplyand fixing factory made 30 mm PVC rigid foam panel door shutter made from mild steel tubular frame of size 19 mm x 19 mm for stiles and 15 mm x 15 mm for topand bottom rails and covered with 5 mm thick head moulded PVC channel having width of 50 mm to form stilesand PVC street of width 75 mm to form rock rail, bottom railand top rail or either side having panels inserted with 5 mm thick PVC sheet sealed with solvent cement adhesive to the stiles and rails with 5 mm x 25 mm PVC sheet beading on either side including three Nos. aluminium hinges for each door complete all as per manufacturer instructionscomplete all as specified and directed. 34 Supply & fixedaluminium anodized, barrel tower bolts of extruded section 200mm long ISI marked complete all as specified. 35 Supply & fixing300 mmaluminium anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminium alloy, complete all as specified. 36 Supply & fixed mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified. 37 Supply & fixed extruded aluminium alloy handles, fabricated type, anodized 150mm long, complete all as specified. 38 S&F Rotational moulded polyethelyne water storage tank HDPE three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade ,complete all as specified. 39 S&F 20mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrulecomplete all as specified. 40 Supply & fixedvitreous china wash hand basin white flat back of size 550x440mm including CI brackets including cutting for and pinning in ends of brackets or erecting stand including 32mm Waste coupling of PTMT(half or full threaded), complete all as specified. 41 S&F snow white one pice EWC Model Name: CASINO 660X350X760 S trap 220mm with soft colse seat cover, including fixing with screw/boltscomplete all as spcified. 42 S&F Viterious china Urinal,Half stall type, white(excluding flushing cistern,flush pipe) complete incl providing for fixing plugs,bedding urinals against wall in cement mortar 1:2,securing urinal to pulge with and including 60mm long brass screw,pointing around urinal back in cement, including urinal spreader etC, complete all as specified. 43 S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore, complete all as specified. 44 S & F 110 mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, laid in trenches and floor, complete all as specified. 45 S & F PVC (SWR)P traps 110 mm bore, complete all as specified. 46 S & F PVC (SWR) S traps 110 mm bore, complete all as specified. 47 S & F PVC (SWR) bends of radius 110mm bore, complete all as specified. 48 S & F PVC (SWR) vent clow of radius 110mm bore, complete all as specified. 49 Material and Labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) in cement mortar (1:3), complete all as specified. 50 Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed . 51 Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed . 52 S&F bib tapcast copper alloy, with cruntch and butterfly handle screwed down , chromium plated, ISI marked,screwed down suitable for 15mm bore pipe or union, complete all as specified. 53 Supply and fixedstop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions, suitable for 20 mm bore tubes, complete all as specified. 54 Supply and fixedstop valves, cast copper alloy ISI marked screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions, suitable for 15 mm bore tubes, complete all as specified. 55 Supply andfixingangle valve, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with capstain head, heavy with adjustable wall flange, complete all as specified. 56 Supply and fixing PVC connection 15mm size with brass nuts of length 450mm complete all as specified. 57 Supply and fixing for CP grating 100 mm dia with or with out hole complete all as specified. 58 S&F for centre hole basin / Wall mixture valve, cast copper alloy fancy type 15mm brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe, complete all as specified. 59 S&F 8mm thick looking mirrio of size 1.00Mtr X 0.90 Mtr of selected quality glass mounted on 8mm thick AC building border or commercial plywood and aliminium angle bading around mirrior fixed on wall PVC plug and screws etc complete all as spcified abd directed. 60 Supply and fixing for aluminium powder coated ventilator having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 1.137 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick frosted glassmaking frame and glass water tightening making it good and Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick etc. Complete all as specified and directed by Engineer-In-Charge. 61 Supply and fixed shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified. 62 S&F aluminium anodised towel rail 20mm dia D type, 60CM long including fitting complete all as specified. 63 M&L for rendering 10mm thick in CM (1:3) onfaces ofconcrete surface of slab with WPC complete all as specified. 64 M&L APP based polymeric membrane 5 layered of weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) over a coat of hot blown bitumen 85/25 penitration grade@1.2 Kg/Sqmprimed on bitumen primer @0.4Kg/Sqmcomplete followed by another coat of semi hot blown bitumen 85/25 grade@1.2 kg/Sqm over the membrane anda coat of aluminium pain tover it, all as specified. 65 S & F toilet paper holder vitrious china box type chromimum plated (CP) brass screws fixed to wall all as spcified and directed. 66 Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out hard and dense soil complete all as specified . 67 M&L for 100 mm PCC(1:5:10) type C2 using 40 mm graded aggregate used as in Sub base Floor/ Pavings and finishing cement concrete surface with out using extra cement, complete all as specified . 68 M & L Chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick over 20mm thick screed bed in CM (1:4) set ,jointedand pointed in neat cement slurry with grey cement and pigment in floors.complete all as specifiedand directed. 69 Material and labour for plain cement concrete type C2 (1:3:6) (Nominal Mix) using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed . 70 M&L for brick work with sub class `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:3 using old size bricks complete all as specified and directed . 71 M&L for concrete bed (1:4:8) Type D2 to 150 mm drain pipe including packing under and haunching against side of pipes after they are laid and tested all as specified. 72 S & F 150 mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, laid in trenches and floor etc. 73 M&L for Cement concrete (1:2:4) Type B1 in lintels upto1.5m clearspan,cills,steps; seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , watertroughs and the like includingweathering,slightly roundedor chamfered angles andthroating, complete all as specified and directed . 74 Materials and labour for rendering 15 mm thick in cement mortar (1:4) on wall finished even and smooth without using extra cement with water proof compound as per manufacturer instruction complete all as specified and as directed. 75 Material & labour for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in precast cement concrete for cover slab set in cement mortar (1:4) with necessary form work complete all as specified and as directed . 76 M & L of On site CONVENTIONAL type LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, 150 mm thick PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for capacity of 3000 ltr,complete all as specified and directed. 77 M&L PCC 1:3:6 type C-2 (20 mm graded aggregate) in in surface channel and drain etc including necessary form work etc, complete all as spcified and diracted. 78 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement , including forms , moulds , mitred / stopped ends etc 79 S&F 25 mm bore dia steel water tubing medium grade galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge. 80 Supply and fixed Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm dia, complete all as specified and directed by Engr-in-Charge. 81 Supply and fixed Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm dia, complete all as specified and directed by Engr-in-Charge. 82 M&L Cutting existing steel tubing 50 mm dia for alterations or additions (Each cut measured) 83 Screwing existing steeltubing 40-50 mm dia for alterations or additions (or lengthening screw on pipe to form connector). 84 M&L for point wiring for one 15 Amps socket point controlled by one switch concealed type with PVC insulated unsheathed copper cable FRLSH 2.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including inner and outer PVC white cover plate of modular complete all as specified and directed. 85 Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed 86 Supply and fixing of modularsocket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed. 87 Supply and fix Water heater storage type, electric, capacity 25 litres230V,50Hz BEE 4 star or above. Made of steel body with steel inner tank covered with glass wool with all connected items and fittings like NRV, Safety valve,PVC connection pipe etc, , complete all as specified & directed. 88 Cutting, Screwing, threading of existing cast iron / GI pipe of 20mm in position for insertion oftee/nipple/gate valve of 15mm bore including fittings viz tee, collar, bend or tail piece etc, complete all as specified & directed. 89 Supply, laying, jointing and testingXLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge. 90 Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge. 91 M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed. 92 Deduction to be made from BOQ for schedule of credit (Sch A Part - II) Amount of ₹ Nilduring AOCNote:- Tenderers shall not quote for this Schedule
