Tender For Fencing Work Around The Transformer At Truma Centre, Haldia-West Bengal

Tender For Fencing Work Around The Transformer At Truma CentreSupplying,fitting,fixing Sun board vinyl with lamination 0.60 mm X 0.40 mm. Each 10.00 2 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. Fencing. Cum 3.80 3 Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm. Including watering and ramming etc. layer by layer complete. Cum 1.27 4 Ordinary cement concrete M15(1:2:4) with graded stone chips (20 mm down) excluding shuttering and reinforcement if any in ground floor. As per IS 456-2000. Cum 0.590 5 Nominal Mix – M20 (1:1.5:3) cement concrete with graded stone chips (20 mm size) including shuttering and reinforcement if any ground floor. (i) Pakur Variety. Cum 1.10 Footing Column 6 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars stirrups binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and binding to correct shape, placing in proper position binding with 16 gagged annealed wire at even intersection complete as per drawing and direction using 10 mm dia. rebbed bar. Other than SAIL/TATA/RINL. MT 0.12 7 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Sqm 11.34 Footing (PCC) Column 8 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. MT 0.300 9 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. For Gate & truss. Sqm 3.78 10 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface With super gloss (hi-gloss) (iv) Two coats For Gate & truss. Sqm 3.78 11 (a) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary. Mtr. 24.00 12 Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised C clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.(The rate is exclusive of the cost of posts). (IV) 75 mm. x 75 mm. x 6 g. Chainlink fancing of sorrounding above brick wall upto

Refer document

INR 74693.0 /-