Supply And Fixing Panel Box At Various Point Nagar Parishad Bundi , P & F In Position Frame Made Out Of M.S. Angle (Riveted Or Welded) Finished With Two Coats Of Red Oxide And Two Coats Enamel Paint Including Cutting, Welding, Holes Etc.Of Following Sizes As Required.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 40Mm X 40Mm X 5Mm , P & F In Position Frame Made Out Of M.S. Angle (Riveted Or Welded) Finished With Two Coats Of Red Oxide And Two Coats Enamel Paint Including Cutting, Welding, Holes Etc.Of Following Sizes As Required.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 3 Pole Power Contactors With Following Ac 3 Rating(95 Amp) , P & F In Position Frame Made Out Of M.S. Angle (Riveted Or Welded) Finished With Two Coats Of Red Oxide And Two Coats Enamel Paint Including Cutting, Welding, Holes Etc.Of Following Sizes As Required.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , One Day Reserve (Analog Type ) , Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 0898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of Q.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution /Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer Incharge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Single Pole Mcb (With B/C Curve Tripping Characteristics) , 50/63 A Rating , Providing & Fixing Of 240/415 V Isolator Isi Arked Is:13947- Iii/Conforming To Iec 60947-3, Suitable For Ac22a Utilization Category, 4Kv Pulse Ithstand Voltage, True Contact Indication, Red Colour Dolly / Lever Shall Have Single Mould Ring Overall Poles For Operation , Two Position Din Rail Mounting, Minimum Phase Termination Acity Of 35Sq.Mm. Ip 20 Contact Protection And Fitted In Existing Distribution Board / Sheet Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Ccrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In-Charge.For Additional Technical Parameters Of Product / Work Refer Nexure A Attached With This Bsr , Four Pole Isolator 63 A Rating , Supplying And Fixing Of Aluminium (Iec 60105 Iso 209-1,2) /Copper (Iec 60028) Bus Bar By Means Of Smc / Dmc Type Insulator With Standard Short Circuit Withstand Capacity, High Tensile Nuts And Bolts Spring Washers In Existing Panel Including Bending , Cutting In Required Shape And Size And Colour Coding With Heat Shrinkable Pvc Sleeves. All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer AnnexureA Attached With This Bsr . , Electrolytic Grade Aluminium Bus Bar 6010 Grade , Supplying And Making End Termination With Heavy Duty Copper Lugs ( Any Type ) Confirming To Is 8337 -1976 Duly Crimped With Crimping Tool, Pvc Tape Etc Of Following Size.All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr , 25.0 Sq.Mm , P & Fixing Powder Coated Crca Sheetclosures On Existing Angle Iron Frame By Means Of Nuts And Bolts And Making Holes , Din Rail Etc. As Quired.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 1.6 Mm Thick , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Unarmoured Copper Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With Electrolytic Grade Copper Made Of Copper Rods Confirming To Is 613-1964, Of Purity >99.7 %, Inner / Outer Sheath Confirming To Is:5831 In Xisting Rcc / Hume / Stoneware / Pvc Pipe/ Open T/Cable Trench / Cable Tray (With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Ccrediated Laboratory For Testing Procedure As Per Is:10810 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 25.0 Sq. Mm 1 Core , Sitc Of 3 /4 Pole Current Limiting Moulded Case Circuit Breaker (Mccb) Made Of Flame Retardent & Heat Resistant Material Having Following Current Rating, Short Circuit Breaking Capacity At 440/415 V, 50 Hz; O/L & S/C Settings , Conforming To Is/Iec 60947 P -2 :2003 With Front Face And Centralised Adjustable, Trip Free Mechanisum, True Contact Position Indicator, Line Load Interchangeability, Gned For Both Horizontal & Vertical Mounting Without Any Adverse Effect On Electrical Performance, Suitable For Operation Upto 55 Degree And Without Derating Upto 40 Degree, Pollution Degree 3, Having Positive Isolation Capability, Push (Test) To Trip, Trip Time Less Then 10 Ms Under S/C Condition, Breaking Capacity Ics = 100% Icu. U Imp =8 Kv, Rated Insulation Voltage 690 V. Provision For Uvr , Shunt Trip , Earth Fault Trip, Door Interlock, Pad Lock & Rotary Handle , Including Making Connections Etc. As Required.Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Certificate Before Execution All As Per Pre Approved By Engineer In-Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 3 Pole Mccb With Thermal Magnetic Release , Up To 100 Amp , 25 Ka, Adjustable O/L & Adjustable S/C Setting, , 125 Amp , 25 Ka, Adjustable O/L & Adjustable S/C Setting,
