Tender For Provision Of Toilets/Bathroom Near Sdp Shed For 20 Or Of Hq 11 Rapid (H) Under Ge Ahmedabad.; 1 Surface Excavation N.exc (not Exceeding) 30 Cm Deep And Averaging 15cm Deep And Getting Out In Soft/loose Soilcomplete all as specified and directed. 2 Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts,wells, esspits, manholes, pier holes, etc. nexc10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete all as directed. 3 Excavating in trenches,exc 1.5m wide & n.exc 3.0 m in depth; for foundation, etc or for shafts,wells, esspits, manholes, pier holes, etc. nexc10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete all as directed. 4 Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (area Of The Sub Structure In Contact With Backfill To Be Measured) complete all as directed. 5 Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface complete all as directed. 6 Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall complete all as directed. 7 Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area complete all as directed. 8 M & L Pcc (1:4:8) Type D2(40 Mm Graded Aggregate) For Footing complete all asdirected. 9 Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Soft To Loose Soilcomplete all as directed. 10 Removing Excavated Soil Not Exc. 50m And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point complete all as directed. 11 M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregatefor Foundation ,plinth beam including Rafts As Mass Concrete complete all as directed. 12 Form WorkFor Rough Finished Surfaces Of Concrete Measured Flat For Foundation,plinth beam complete all as directed. 13 S&Fhigh strength deformed TMTsteel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as directed. 14 All as above item no. 1.13 But 5 To 10mm Dia In Stirrups, Spacers & Binders complete all as specified and directed. 15 M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Column complete all as directed. 16 Form WorkFor Rough Finished Surfaces Of Concrete Measured Flat For Column complete all as directed. 17 M &L Brick work withold size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, Mean Radius, Built In Cm (1:6) complete all as directed. 18 M&L Brickwork With old size subclass ‘B’ bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls, Built In Cm (1:4) complete all as directed. 19 M & L Rcc- M-25 (design Mix) Using 20mm Graded A complete all as directed.ggregate For Lintel Band,and slab beam complete all as directed. 20 Form WorkFor Rough Finished Surfaces Of Concrete Measured Flat For Lintel Band and slab beam complete all as directed. 21 M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Slab complete all as directed. 22 Form WorkFor Rough Finished Surfaces Of Concrete Measured Flat For Slab complete all as directed. 23 M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Parapet complete all as directed. 24 Form WorkFor Rough Finished Surfaces Of Concrete Measured Flat For Parapet complete all as directed. 25 M & L 10 Mm Thick 1:6 Cm Internal Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as directed. 26 M & L 5 Mm Thick 1:3 Cm Plaster On Ceiling. Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as directed. 27 M & L 15 Mm Thick (10 Mm + 5 Mm 1:6 Cm) External Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement) complete all as directed. 28 Supply Only Integral water proofing compound complete all as specified and directed. 29 M &L Pcc 1:3:6 Type C-0 forFilling In Door Frame complete all as directed. 30 S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as directed. 31 S&F 35 Mmm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as directed. 32 S & F Solid Pvc Door Frame Of Size 50mm X 47mm Made Out Of 5mm Wood Grain Printed Pvc Sheet Reinforced With M.s. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing 33 S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (style) Consisting Of Frame Made Out Of M.s. Tubes For Top & Bottom Rails. M.s. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘c’ Channel Having A Pvc Sheet Strip Of 20mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.s. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame AtSite As Per Specification & Drawing. 34 S&F Al Barrel Tower Bolt Of200 Mm Long complete all as specified and directed. 35 S&F Al Handles Cast Anodised 125 Mm Long complete all as specified and directed. 36 S&F Al Drop Bolt Of 150 Mm Long complete all as specified and directed. 37 S&F Floor Door Stoper Al Alloy 150mm Long complete all as specified and directed. 38 S& F Ms Butt Hinges HwOf 100 Mm Long complete all as specified and directed. 39 M&L for Powder coatedaluminium ventilator having frame of Section 57x52 ,Series -B 20535 andshutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.).complete all as specified and directed. 40 M&L preparation of newly plastered surface and applying Two Coats Of Oil Bound Distemper Over One Coat Of Wall PrimerAll As Specified With Approved Colour Pattern On Walls, Beams, Soffits, Columns, Etc. complete all as specified and directed. 41 M&L Preparation of newly plastered surface and applying Three Coats Of White Wash All As Specified On Ceilings, Etc. complete all as specified and directed. 42 M&l Two Coats Of Cement Based Paint Over One Coat Of Wall Primer All As Specified With Approved Colour Pattern OnWalls,beams,soffits,columns 43 M&L Machine Cut Kota Stone Slab Flooring 20-25mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And mirrorPolishing Complete over Screed Bed Or Bedding Layer Of Mortar Cm(1:3) 20mm Thick For Laying Floor Finishes As In Base complete all as directed. 44 M&L Non - Skid Ceramic Tiles 7 To 8 Mm Thick (square/rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To MatchScreed Bed Or Bedding Layer Of Mortar 15 Mm Thick For Laying Floor Finishes In CM 1:6 complete all as directed. 45 M &L Cement Concrete 75mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed. 46 M&L Glazed Ceramic Tiles In Vertical Surface 350x 250x 7 Mm/ 450x 350x 7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match over 10 Mm Thick 1:3 Cm Plaster On Walls complete all as directed. 47 M & L 75mm Thick Plinth Protection Pcc (1:3:6) Using 20mm Graded Aggregate complete all as specified and directed. 48 Hardcore Of Guage Exc 63mm But N Exc. 100 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rolled/rammed To A True Surface complete all as specified and directed. 49 M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm& 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete all as specified and directed. 50 S&F in vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and directed. 51 S&F10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed. 52 S&F PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. 53 S&F Stop valve/ angle valve , cast copper alloy, chromium plated fancy typehandle, screwed down, high pressure with push type handle screwed for 15 mmbore iron pipe and fixed. 54 S& F 150mm Toilet Paper Holder complete all as specified and directed. 55 S&Fbrass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and directed. 56 S&F Stop valve(concealed type), cast copper alloy, chromium plated fancy typehandle, screwed down, high pressure with push type handle screwed for 15 mmbore iron pipe and fixed. 57 M&LMarble work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble 58 S &F PVCfloorTraps with gradting75mm Bore complete all as specified and directed. 59 S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 15 mm bore complete all as specified and directed. 60 S&F Steel water tubing, medium grade, galvanised with & including all tube fittings & fixed / consealed in walls and ceiling or laid in floors including testing complete of 20 mm bore complete all as specified and directed. 61 S&F Vitreous china urinals, Urinal Bowl Type 465x355x265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with & including 60 mm long brass screw, fixing flush pipe, brass CP grating and union for discharge pipe, PVC telescopic waste pipe of suitable length etc complete all as specified and directed. 62 S&F Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, pillar taps, PVC connection of suitable length, brackets and cutting for & pinning in ends of brackets etc complete and fixed. 63 S&F 15mm Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle Chromium Plated complete all as specified and directed. 64 S&F in repairHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified 65 S&F 5.5 mm thick looking mirror size 600 x 450 mm with PVC frame of approved quality & make GE fixed in position with rawl plug and screws of appropriate size. 66 S&F Pvc Swr Pipe 110 Mm Soil Pipe complete all as specified and directed. 67 S&F Pvc Swr Pipe 75 Mm Waste Pipe complete all as specified and directed. 68 S&F Pvc Bend Suitable For 110 Mm complete all as specified and directed. 69 S&F Pvc Bend Suitable For 75 Mm complete all as specified and directed. 70 S&F Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 500 litres hoisted and placed in posiition on PCC platform complete all as specified & as shown on drawings complete all as specified and directed. 71 S&F PTMT Ball Valve 25 Mm Dia For Water Tank complete all as specified and directed. 72 Removing excavated material exc 250m but n. exc. 500m and depositing where directed at a level n exc 1.5m above the starting point.( soils) complete all as specified and directed. 73 M & L for providing PCC 1:4:8 type D-2 (40mm graded agg) 100 mm thick ,as in sub base to floors. 74 M & L25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 75 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 76 M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. 77 M&L for PCC 1:3:6 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishingexposed surface of concrete complete all as specified and shown in drawing 78 M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes all as specified. 79 M&L forPrecast cement concrte type B1 1:2:4 using 20mm graded stone agg set in CM (1:6)in cover slabs for manholeand similar articles etc. complete all as specified and directed. 80 M&L for MS TMT bars 8 mm dia, cut to length, bend to shape required including cranking, bending and binding with MS wire not less than 0.90 mm dia or securing with clips. 81 M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even & fairw/o using extra cement. 82 Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, mouldsmaterials/stoppageand complete all as specified 83 M&L for salt glazed stone ware 150 mm internal dia drain pipes grade `A’ laid in trenches and jointed complete all as specified and directed. 84 M&L for concrete cement 1:3:6 type C-2 to drain pipes including packing under and haunching agaainst the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete all as specified and directed. 85 Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required. 86 Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoliclaminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :- 87 One light point controlled by one switch. 88 One Ceiling/Ex/Venti fan point controlled by one switch. 89 One socket outlet 6 amp controlled by one switch on the same board with other switches. 90 One socket outlet 6 amp controlled by one switch on indepdendent board. 91 Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed. 92 S&F switch piano flush button single pole one way 6 amp complete all as specified and directed. 93 S&F switch piano flush button single pole one way 16 amp complete all as specified and directed. 94 S&F socket outlet2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed. 95 S&F socket 6 amp 3 pin 2 module complete all as required at site or directed by Engr -In- Charge. 96 S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed. 97 M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green)drawing into andincluding concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- 98 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit.. 99 Supply and fixing LED Battens lights fitting with power consumption of 20W, having dimension 4 Feet, CRI: 80, made up of polycarbonate,with efficiency of 120 Lumens per watt, Color Temp (CCT) should be 4000K (Natural White), Power factor >0.9, IP20, 220V,with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 100 Supply and fixing LED Battens lights fitting with power consumption of 10W, having dimension 2 Feet, CRI: 80, made up of polycarbonate,with efficiency of 120 Lumens per watt, Color Temp (CCT) should be 4000K (Natural White), Power factor >0.9, IP20, 220V,with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 101 S&F in bldg security LED lights fitting including fixing arrangement on wall with suitable size of GI pipe bend into shape, clamps and nut & bolts for fitting capacity ofLED 50 watt, with pressure diecast aluminum housing & polycarbonate having top opening seperate driver compartment with IP66 protection and impact resistance IK07 duly prewired connection complete all as specified and directed. 102 M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified 103 Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification 104 S&F MCBs as per load requirementC series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- 105 SP 6 to 32 amp. 106 SPN 32 amp. 107 Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body complete all as specified and directed. 108 S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete and with all fitting and fixing accessories including PVC pipe connection complete all as specified and directed. 109 Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral 110 Supply & Laying ,XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mmX 2Core complete all as specified and directed. 111 Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed. 112 Supply and lay pipe galvanized, “Medium class”, including fittings 25 mmdia. complete all as specified and directed. 113 Supply and fix Valve, globe conforming to IS 9338, 50mm (2”) dia pipe. 114 S&F 25 mm dia , Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.
