|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and as directed. |
| 2 | M & L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundations, fillings as mass concretecomplete all as specified and as directed. |
| 3 | M&L for precast cement concrete block masonry with solid block, Type C1 1:3:6 (using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6complete all as specified and as directed. |
| 4 | M & L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, finished even and fair without using extra cement,complete all as specified and as directed. |
| 5 | M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as sub base,complete all as specified and as directed. |
| 6 | M & Lfor screed bed or bedding layer of 20 mm thick for laying floors finishes in CM 1:6complete all as specified and as directed. |
| 7 | M/L Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match complete all as specified and as directed. |
| 8 | M & L for rendering 10mm thickin CM (1:6) on brick masonry/ precast cement concrete block masonry internal surfaces of wallsfinished even and smooth without using extra cementcomplete all as specified and as directed. |
| 9 | M & L for rendering 10 mm thick in CM 1:4 on concrete surfaces as in backing coat for dadocomplete all as specified and as directed. |
| 10 | M & L for glazed coloured ceramic tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in colour cement to matchcomplete all as specified and as directed. |
| 11 | M/L 15 mm thick rendering CM 1:4of brick masonry/ precast cement concrete block masonry surfaces and finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 12 | M/L 5 mm thick rendering in cement mortar (1:3) on ceiling and finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 13 | M & L for preparation of newly plastered surfaces exc 10cm width or girth, of any description and applying two coats of cement based paint over a coat of primer,complete all as specified and as directed. |
| 14 | M & L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 15 | M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceilingcomplete all as specified and as directed. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and as directed. |
| 17 | Formwork to edges of concrete fair finish surface exc. 10 cm but n. exc. 20 cm wide (Horizontal or sloping)complete all as specified and as directed. |
| 18 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etccomplete all as specified and as directed. |
| 19 | M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beamsetccomplete all as specified and as directed. |
| 20 | S&F aluminum frame as in frame of door/ window / partitions , etcwith one or more rebates including hinges, handles, jointing cleat for fixing etc.complete all as specified and as directed. |
| 21 | S&F Anodised aluminium ventilator louvers with frames, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and including all necessary fittingscomplete all as specified and as directed. |
| 22 | S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with rubber in square n exc 0.5 sq. m in each panecomplete all as specified and as directed. |
| 23 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, brought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and including all necessary fittingscomplete all as specified and as directed. |
| 24 | M&L for 30mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and as directed. |
| 25 | S&F 150mm long aluminium handles, cast type, anodisedcomplete all as specified and as directed. |
| 26 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and as directed. |
| 27 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloycomplete all as specified and as directed. |
| 28 | S&F 75mm long butt hinges, heavy weight, cold rolled mild steel,complete all as specified and as directed. |
| 29 | M&L for preparation of new untreated surface and applying two coats of synthetic enamel paint over a coat of pink primer on woods complete all as specified and as directed. |
| 30 | S & F full pedestal Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting standand 32 mm diaPVC waste pipeincluding waste coupling 32mm size full threadcomplete all as specified and as directed. |
| 31 | S&F 15mm bore Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed. |
| 32 | S&F bib taps cast copper alloy ISI marked with crutch or butter fly handles fancy type chromium plated screwed down screwed for iron pipe of 15mm borecomplete all as specified and as directed. |
| 33 | S &F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia,complete all as specified and as directed. |
| 34 | Supply & fixedvitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device alongwith Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 35 | S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixingofflush pipe) including provision of cement concrete bedding,complete all as specified and as directed. |
| 36 | S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WCcomplete all as specified and as directed. |
| 37 | S&F Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white in colour with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe )complete including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cementcomplete all as specified and as directed. |
| 38 | S&F PVC connections 15mm size with PTMT nuts of length 450mmcomplete all as specified and as directed. |
| 39 | S&F 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC frame fixed with chromium plated brass screws and cup washers with PVC beadingcomplete all as specified and as directed. |
| 40 | M&L Outer Dia 16mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc,including taking up or down complete all as specified and as directed. |
| 41 | M&L Outer Dia 20mm, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, including taking up or down complete all as specified and as directed. |
| 42 | Making connection of PP-R distribution branch with PP-R suitable for 16mm and 20mm bore sizes by providing and fixing tee including cutting and making fusion joint etc. |
| 43 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting notexc 10 cm girthcomplete all as specified and as directed. |
| 44 | S & F stop valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unionscomplete all as specified and as directed. |
| 45 | S&FPVC (SWR)floor trap 75 mm with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed. |
| 46 | S&F PVC (SWR)gully trap 125/110 mm with grating including jointing to waste pipe with solvent cement and fixed in cement concrete type B-1 (1:2:4)complete all as specified and as directed. |
| 47 | M&L110 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as waste pipesjointed with solvent cement completeall asspecified and as directed. |
| 48 | M&L75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as waste pipesjointed with solvent cement completeall asspecified and as directed. |
| 49 | M&L110 mm bore PVC (SWR) Bends any radius for connecting or diversion of pipes fixed with solvent cemnt completeall asspecified andas directed. |
| 50 | M&L75 mm bore PVC (SWR) Bends any radius for connecting or diversion of pipes fixed with solvent cemnt completeall asspecified andas directed. |
| 51 | M&L150 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as waste pipesjointed with solvent cement completeall asspecified and as directed. |
| 52 | M&L for cement Concrete bed (1:4:8 type D2) to 150 mm diapipes including packing under, and haunching against the sides of pipes after they are laid and testedcomplete all as specified and as directed. |
| 53 | S&Ffor 500 ltr Insulated 9 layer water tank using 100mm rockwool, Nitrile rubber sheet, black polyethene 42-44 micron, cellotape, screws(Including tank)complete all as specified and as directed. |
| 54 | M&L for cement concrete (1:3:6) type C-2 using 40 mm gradedaggregate as in foundation filling & mass concrete etccomplete all as specified and as directed. |
| 55 | M&L for rendering 10 mm thickin CM 1:4 on brick masonry/ precast cement concrete block masonry surfaces finished other than fair faces &without using extra cementcomplete all as specified and as directed. |
| 56 | M&L for PCC 1:2:4, type B1using 20 mm graded stone aggregate in coping & in bedding & haunching against the side of wall of manholescomplete all as specified and as directed. |
| 57 | M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in landings, cover slab (for manholes), shelves & similar articles with plan faces & set in CM 1:4complete all as specified and as directed. |
| 58 | Returning filling incl leveling ,watering and well ramming in layers n exc 25 cmany type of soil complete all as specified and as directed. |
| 59 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting pointcomplete all as specified and as directed. |
| 60 | M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for followingcomplete all as specified and as directed by Engr-in-Charge.Note:- Screw used for fixing TW boards, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. |
| 61 | One light point controlled by one 5 Amps one way switch |
| 62 | One 3 pin socket outlet 5 Amps on same board |
| 63 | All as per item No 60.00 above but for one 3 pin socket outlet 15 Ampsindependent with cable of size 2.5 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and as directed by Engr-in-Charge. |
| 64 | S & F Switch piano flush button single pole one way 5 Amps, 240 Voltscomplete all as specified and as directed by Engr-in-Charge. |
| 65 | S&F socket outlet 3 pin, 5 Amps, 1 flush type suitable for 2 pin / 3 pin plugcomplete all as specified and as directed by Engr-in-Charge. |
| 66 | S&F switch socket combination 2 in 1, 3 pin, 15 Amps, flush type (multipurpose) complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testingcomplete all as specified and as directed by Engr-in-Charge. |
| 68 | S & F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittingscomplete all as specified and as directed by Engr-in-Charge. |
| 69 | S & F PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mmcomplete all as specified and as directed by Engr-in-Charge. |
| 70 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 8 waycomplete all as specified and as directed by Engr-in-Charge. |
| 71 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioningcomplete all as specified and as directed by Engr-in-Charge. |
| 72 | Supply and fixing MCB SPN240V, 10KA \"C\" curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed by Engr-in-Charge. |
| 73 | Supply and fixing Rechargeable LED Bulb energy saver9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white colorcomplete all as specified and as directed by Engr-in-Charge. |
| 74 | Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed by Engr-in-Charge. |
| 75 | S&F LED Light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge. |
| 76 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V,50Hz RPM 1200 copper winding of sweep 300mcomplete all as specified and as directed by Engr-in-Charge. |
| 77 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable sizecomplete all as specified and as directed by Engr-in-Charge. |
