Tender For Electrification Work Of 6 Percent Abadi Plots In Village Chuharpur Khadar (Balance Work), Greater Noida. - S/E of Section Double pole structure on ST pole 410 SP-62 12 mtr long with 1/6 over length of poles grounted with cement concrete in 1:3:6 (one cement: 3 coarse sand 6 Stone balleast) including plingthing of pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X2.24 mtr. & 75X40 mm 2.24 mtr. M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. required for proper completion f work as per direction of E/I. (GNIDASOR-28/2024) 3 Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement: 3 coarse sand: 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastring of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. (GNIDASOR-27/2024) 4 410 SP-62, 12mtr. long, (Approx. wt. 241kg.) 5 Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 11000V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI (Bombay/Nashik), Fort Gloster (Calcutta /Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells, Kalinga, Suraj, Delton Grandley & Polycab make can be used) sanctioned rate (FTS-134717) 6 3CX120 Sqmm. + 95 Sqmm. 7 Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. sanctioned rate 8 The installation should be complete in all respects and as per requirement of the job (CCI (Bombay/Nashik), Fort Gloster (Calcutta /Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make (GNIDASOR-02/2024) 9 (a) 3CX300 Sqmm. 10 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: (GNIDASOR-05/2024) 11 (a) 3CX300 Sq.mm. (Outdoor type) 12 Supplying and making straight through cable jointing with cast resin compound, including ferrule and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: (GNIDASOR-06/2024) 13 (a) 3CX300 Sq.mm. 14 Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 11000V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI (Bombay/Nashik), Fort Gloster (Calcutta /Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells, Kalinga, Suraj, Delton, Grandley & Polycab make can be used) SOR-50 (GNIDASOR-65/2024) 15 3CX95 Sqmm. + 1CX50 Sqmm.+ 70 Sqmm. Massanger 16 Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI (Bombay/Nashik), Fort Gloster (Calcutta /Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells, Kalinga, Suraj, Delton, Grandley & Polycab make can be used) (GNIDASOR-65/2024) 17 2CX25 Sqmm. + 25 Sqmm. Massanger 18 Supply & erection of strut stay set with 410 SP-58 12 mtr long ST.pole with M.S clamp complete with grouting etc complete in all respect etc as per Direction of Engineer in charge. (GNIDASOR-30/2024) 19 Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.as per uppwd schedule 2018 item no. 630 20 S/F of one side cross arm made of 100x50x6mm M.S. channel 0.90mtr. Long & 50x50x6mm M.S. angle 1.0 Mtr. Long with M.S. clamp, nut bolts etc. complete in all respect. (Approved on FTS-134162) 21 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.item no 701 22 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect., UPPWD Schedule 2018 item no 716 23 S/F of 11 KV polymeric with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. for proper completion of work. (Jaishree, BHEL, RR, Hindustan make) (GNIDASOR-68/2024) 24 S/F of Cross Arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect. AR (GNIDASOR-33/2024) 25 Supply & Erection of End clamp (J Hook) (AR) (FTS-134162) 26 Supply & Erection of Screw Tightner (AR) (FTS-134162) 27 S/F of suspension clamp with insulated suitable ABC arial bunched conductor complete in all respect (AR) (FTS-134162) 28 S/F of L.T. Junction Box on pole suitable for outdoor type operation of size 388X304×170mm made of 3.0mm CRCA sheet complete in respect as per direction of E/I. (AR) (FTS-134162) 29 S/F of 50 Sqm to 16 Sqm L.T. ABC connector on pole complete in all respect (A/R). (GNIDASOR-39/2024) 30 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. As per UPPWD sch. 2018 (item no-504) 31 95 Sqmm. 32 50 Sqmm. 33 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.as perUPPWD-2018 item no 1423 Cat AA 34 Supply and fixing of following dia G.I. pipe (B) class) in pole used as LED street light bracket for fixing of LED Street light and for cable entry including bending the pipe to the required shape complete as required (Each piece make 1.5 Mtr Long). DSr-18/11.6.2 (use as street light bracket) (GNIDASOR-38/2024) 35 40 mm dia 36 Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-3. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 37 25Amp. TPN (As per UPPWD Schedule 2018 item no.807 e (2) 38 Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. (G.I. wire should use as a support to bind overhead line with it at interval of 5 mtr.) As per UPPWD Schedule-628 39 Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. as per UPPWD Schedule-2018 item no 289 40 S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. below the road level thereby doing the work of providing DWC pipe by Trenchless method.(GNIDASOR-15/2024) 41 Supply & fixing of 100 mm x 110 mm shackle insulator/100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. Item no (UPPWD-2018 item S.no.621) 42 Supply & fixing of anticlimbing device fabricated from G.I.(flat) of 25 mm x 6mm size in a shape of ring of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. including all the materials, labour, T&P and other material required for proper completion for work and to the satisfaction of Engineer-in-Charge.as per UPPWD Schedule-2018 item no 635 43 Supply and fixing of heavy duty cadmium plated copper connector with end plate complete in all respect. As per UPPWD Schedule-1128 44 (a) Two way connector HKM 100 45 (c) Four way connector HKM 100 46 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. (UPPWD-2018 (1109) 47 S/F of 11 KV Drop-out type fuse set channel type of Relco or equivalent make with insulators and other accessories required for proper completion of work. sanctioned rate(GNIDASOR-46/2024) 48 Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect. (PS-634) 49 Numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of E/l at site. sanctioned rate (FTS-134717) 50 S/E of D clamps 50x6MM flat iron on steel tubular pole/steel rail pole with bolts, nuts etc. complete in all respect including with aluminium paint. (PS-623)(UPPWD-2018) 51 Labour Cess and GST will be paid extra as per govt. orders
