Tender For Construction Of Sub-Centre Building At Bastariguda Under 15Th Finance Grant For The Year 2023-24
Tender Value
46.20 Lakhs
Estimated cost
Bid Submission
17 Jul 2025
0 days left
EMD
46300
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohana → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sub-Centre Building At Bastariguda Under 15Th Finance Grant For The Year 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Building Work, Ground FloorEarth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-chargel. |
| 2 | Providing & filling good clean river sand of approved qualityincluding watering to complete saturation & ramming completeincluding cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labourrequired for the work etc complete as per specification & direction of Engineer-in Charge. |
| 3 | Providing Cement Concrete (1:3:6) with 40mm size clean handbroken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyanceroyality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineriesrequired for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge. |
| 4 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materialsroyalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etcrequired for the work complete in all respect as per the direction of Engineer-in-charge. Foundation |
| 5 | Superstructure |
| 6 | RCC work of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where neCessary including cost, conveyance,and royalties of all materials DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,and labour & cess required for the workin all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base |
| 7 | RCC Column |
| 8 | RCC Plinth Beam |
| 9 | RCC Lintel |
| 10 | RCC Chajja |
| 11 | RCC Roof Beam |
| 12 | RCC Roof Slab |
| 13 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyanceof M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour required for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) as per the direction of Engineer-in-Charge. |
| 14 | 12mm (1/2\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work withroyalties,DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 15 | 16mm (5/8\") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labourrequired for the work withroyalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & Cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 16 | 20mm (3/4\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and Cessrequired for the work with alland royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges etc, complete in all respect in all floors as per direction of Engineer-in-charge. |
| 17 | Supplying,fitting & fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS:13755 with application of polymer modified quick set cement based water resistant adhesive conforming IS:15477 of 3 mm thick bed and filling joints with white cement of approved quality including cost,conveyance of all materials, labour,Cess etc required for the work withroyality , DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of all materialsrequired for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 18 | Providing 20 cm X 30 cm ceramic wall tiles fixing in dadoos skriting and rises of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of pre cast tiles watering & curing for 7 days with cost conveyance royalty DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of of all materials & labour with Cessetc required for the workcomplete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge. |
| 19 | Supplying & Providing of M.S Gate made out of M.S.Angle 25x25x3mm at the perigphery & M.S.Flat 25x6mm in the inner design conforming to IS 1977/95 with hold fast made out of MS angle as used in periphery as per the Design with cost, conveyance &or all materials & labour with T&P Cess in all respects as directed by Engineer-in-Charge. |
| 20 | Supplying & Providing of M.S. Pannelled door double leaved with MS frame over all size including frame made out of following materials conforming to relevant ISS frame: 30 x 30 x 5mm M.S.Angle door panel 1.0mm C.R.sheet panel stiffener covering width of leaf 19 x 5 mm flat 3 nos Hingessize 100 mm 3 nos bought out as per ISS hold fast 30x30x5mmMS angle 150mm length bifurcated at the tip 3 nos on one side handle 19x5mm M.S.Flat ,fabricated 2 Nos aldrop 2 nos bought out as per ISS Tower Bolt 2 nos bought out as per ISS including cost conveyance &of all materiasl& labour with T&P & Cess in all respectas per direction of Engineer In Charge. |
| 21 | Labour for fitting,fixing ofM.S.Door/ Window shutters as per approved design including cost of screws with cost of all labour, T&P and Cess required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges. |
| 22 | Labour for fitting and fixing of M.S..Gate as per approved desing including cost of all materials and Cess etc complete as per specification and direction of Engineer-in-Charge |
| 23 | Painting two coats with any approved paintto Iron work including cost of thepaint sand papering polishing the surface with cost conveyance of all materials and labourrequired for the work with Cess etccomplete as per the direction of the Engineer-In-Charge. |
| 24 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance royalities andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 25 | Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials,labour and Cess required for the work complete in all respect as per the direction of Engineer-in-Charge. |
| 26 | Supplying,fitting,fixing of U PVC sliding window of approved makewith 6mm thick black glass of approved qualitywith rubber beading including locking arrangement withcost of allmaterials including6 mm thickcost of glass, labour, cess etc required for the work complete as perspecification & direction of Engineer-in-charge. |
| 27 | First FloorRCC work of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where neCessary including cost, conveyance,and royalties of all materials DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,and labour & cess required for the workin all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. RCC Column |
| 28 | RCC Lintel |
| 29 | RCC Chajja |
| 30 | RCC Roof Beam |
| 31 | RCC Roof Slab |
| 32 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materialsroyalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etcrequired for the work complete in all respect as per the direction of Engineer-in-charge. Superstructure |
| 33 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyanceof M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour required for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) as per the direction of Engineer-in-Charge. |
| 34 | 12mm (1/2\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work withroyalties,DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 35 | 16mm (5/8\") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labourrequired for the work withroyalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & Cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 36 | Supplying,fitting & fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS:13755 with application of polymer modified quick set cement based water resistant adhesive conforming IS:15477 of 3 mm thick bed and filling joints with white cement of approved quality including cost,conveyance of all materials, labour,Cess etc required for the work withroyality , DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of all materialsrequired for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 37 | Providing 20 cm X 30 cm ceramic wall tiles fixing in dadoos skriting and rises of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of pre cast tiles watering & curing for 7 days with cost conveyance royalty DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges of of all materials & labour with Cessetc required for the workcomplete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge. |
| 38 | Supplying & Providing of M.S Gate made out of M.S.Angle 25x25x3mm at the perigphery & M.S.Flat 25x6mm in the inner design conforming to IS 1977/95 with hold fast made out of MS angle as used in periphery as per the Design with cost, conveyance &or all materials & labour with T&P Cess in all respects as directed by Engineer-in-Charge. |
| 39 | Supplying & Providing of M.S. Pannelled door double leaved with MS frame over all size including frame made out of following materials conforming to relevant ISS frame: 30 x 30 x 5mm M.S.Angle door panel 1.0mm C.R.sheet panel stiffener covering width of leaf 19 x 5 mm flat 3 nos Hingessize 100 mm 3 nos bought out as per ISS hold fast 30x30x5mmMS angle 150mm length bifurcated at the tip 3 nos on one side handle 19x5mm M.S.Flat ,fabricated 2 Nos aldrop 2 nos bought out as per ISS Tower Bolt 2 nos bought out as per ISS including cost conveyance &of all materiasl& labour with T&P & Cess in all respectas per direction of Engineer In Charge. |
| 40 | Labour for fitting,fixing of M.S.Door/ Window shutters as per approved design including cost of screws with cost of all labour, T&P and Cess required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges. |
| 41 | Labour for fitting and fixing of M.S..Gate as per approved desing including cost of all materials and Cess etc complete as per specification and direction of Engineer-in-Charge |
| 42 | Painting two coats with any approved paintto Iron work including cost of thepaint sand papering polishing the surface with cost conveyance of all materials and labourrequired for the work with Cess etccomplete as per the direction of the Engineer-In-Charge. |
| 43 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance royalities andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 44 | Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials,labour and Cess required for the work complete in all respect as per the direction of Engineer-in-Charge. |
| 45 | Supplying,fitting,fixing of U PVC sliding window of approved makewith 6mm thick black glass of approved qualitywith rubber beading including locking arrangement withcost of allmaterials including6 mm thickcost of glass, labour, cess etc required for the work complete as perspecification & direction of Engineer-in-charge. |
| 46 | Head roomRCC work of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where neCessary including cost, conveyance,and royalties of all materials DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,and labour & cess required for the workin all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. RCC Column |
| 47 | RCC Lintel |
| 48 | RCC Chajja |
| 49 | RCC Roof Beam |
| 50 | RCC Roof Slab |
| 51 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materialsroyalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etcrequired for the work complete in all respect as per the direction of Engineer-in-charge. Superstructure |
| 52 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyanceof M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour required for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) as per the direction of Engineer-in-Charge. |
| 53 | 12mm (1/2\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work withroyalties,DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 54 | 16mm (5/8\") thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labourrequired for the work withroyalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & Cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 55 | Supplying & Providing of M.S Gate made out of M.S.Angle 25x25x3mm at the perigphery & M.S.Flat 25x6mm in the inner design conforming to IS 1977/95 with hold fast made out of MS angle as used in periphery as per the Design with cost, conveyance &or all materials & labour with T&P Cess in all respects as directed by Engineer-in-Charge. |
| 56 | Painting two coats with any approved paintto Iron work including cost of thepaint sand papering polishing the surface with cost conveyance of all materials and labourrequired for the work with Cess etccomplete as per the direction of the Engineer-In-Charge. |
| 57 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance royalities andof allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 58 | Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials,labour and Cess required for the work complete in all respect as per the direction of Engineer-in-Charge. |
| 59 | E I WORK WIRING Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 60 | -do- Group B |
| 61 | -do- Group C |
| 62 | Recessed wiring to Fan Point in... - do- Group B |
| 63 | Recessed wiring to Call Bell Point in... -do- Group B |
| 64 | Recessed wiring to Exhaust Fan Point in…..-do- Group B |
| 65 | S/F of Angle holder replacing Ceilling Rose |
| 66 | S/F of fan hook \"S\" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 67 | Switch Boards S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board(1.25.1+1.25.4) |
| 68 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 69 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of6 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 70 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 71 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover. |
| 72 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection. |
| 73 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 74 | 6 Modular box with base & cover |
| 75 | 8 Modular box with base & cover |
| 76 | 12 Modular box with base & cover |
| 77 | SUB-MAIN Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 78 | 2x2.5+1x1.5 (1.8.2) |
| 79 | 2x4+1x1.5 (1.8.3) |
| 80 | 2x6+1x2.5 (1.8.4) |
| 81 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 82 | Circuit Breakers & BDB S/F of \"B/C/D\" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 83 | S/F of \"B/C/D\" series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required(2.6.2a)+(2.3.1b) |
| 84 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Single door (2.3.2) |
| 85 | Main switches Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 86 | Earthing Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 87 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 88 | Fittings Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 89 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB) |
| 90 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 91 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 92 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 93 | Fixing /I.T.C. of stepped type Modular regulator (1.25a) |
| 94 | S/F of 20-25 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells) |
| 95 | S/F of 30-35 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells) |
| 96 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells) |
| 97 | S/F of9w Watt LED Bulb |
| 98 | Cables S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire |
| 99 | P H WORK Water supply/supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.R.C.C Roof/Chaja |
| 100 | Cutting Groove in wall or floor |
| 101 | Cutting hole(250 mm wall) |
| 102 | Cutting hole(375 mm wall) |
| 103 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr aboveG.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of FF |
| 104 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of FF |
| 105 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I./PVC pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.20mm dia PVC pipesInternal |
| 106 | 25mm dia PVC pipesExternal |
| 107 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.15mm dia CP Bib CockSB |
| 108 | 15mm dia CP Bib Cock LB |
| 109 | 15mm dia CP Pillar Cock |
| 110 | 15mm dia CP Two way Bib Cock |
| 111 | 15mm dia CP Angle Stop Cock |
| 112 | 15mm dia CP Concealed Stop Cock |
| 113 | 25mm dia Brass Full Way Valve |
| 114 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Parryware,Hindware) with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C 15 mm x 150mm dia C.P Shower with arm |
| 115 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 116 | Supplying and fitting & fixing ofI.S.I make 1.00 H.P single phase Submersible Pump set to give discharge of3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC. |
| 117 | Supplying and fitting & fixing ofD.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge. |
| 118 | Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge. |
| 119 | Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp,etc all complete as per direction of Engineer-in-charge. |
| 120 | Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.32 mm dia HDPE Pipe |
| 121 | Supplyingall labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtrOutside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 122 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 123 | Labour for drilling a perfectly vertical bore holes of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilled rig as required to suit the site condition as per the direction of E.I.C. including use of own rig with its accessories, tools and plants and consumable etc. for lowering of 125mm dia consumable etc. for lowering if 125mm dia PVC/GI Pipes for housing filled with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC) casing pipes it required to prevent collapse of overburden portion is to be provided by the contractor including lowering and withdrawing after completion of tubewell. (a) Drilling of 125mm dia bore.i) 0m to 40m |
| 124 | (b) Drilling of 100mm dia bore. (41m to 100m & above) |
| 125 | Lowering the following sizes GI/PVC Pipes with or without slotted pipes as per the necessity from gravel level upto 30 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plants etc. completes and keeping the top of the casing pipes threaded including plugging tubewell to prevent entry foreign materials.lowering of 125mm dia. P.V.C pipe |
| 126 | Cost of 125mm dia. P.V.C pipe |
| 127 | Cleaning and developing the tube wells with their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC |
| 128 | SanitaryInstalation/Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes |
| 129 | 110mm U-PVC SWR P-trap |
| 130 | 110mm U-PVC SWR Single junction door |
| 131 | 110mm U-PVC SWR door bend |
| 132 | 110mm U-PVC SWR Offset |
| 133 | 110mm U-PVC SWR plain bend |
| 134 | 110mm U-PVC SWR vent cowl |
| 135 | 75 mm diameter U-PVC SWR pipes |
| 136 | 75mm U-PVC SWR single junction |
| 137 | 75 mm U-PVC SWR plain bend |
| 138 | 125 mm dia C.P Grating |
| 139 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrestetc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Hindware,Parryware) |
| 140 | Supplying all materials, labour, T&P and fixing Anglo Indian water closet with \"P\" trap plain etc all complete as per specification and direction of the E.I.C. |
| 141 | Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.WHB |
| 142 | 600x450x200 mm stainless steel kitchen sink(Mousumi make) |
| 143 | 600x450x250 mm Porcelain sink (Hindustan make)at clinic |
| 144 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. |
| 145 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C20mmx450mm long CP towel rail |
| 146 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C |
| 147 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.Toillet-2 x 1.20 x 1.95=4.68 + 1 x 1.20 x 2.25 =2.70 Orissa Pan-2 x 0.583 x 0.44=0.513) GF |
| 148 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in Dado,including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.Kitchen-3.90mx1.50m+Toilet-2x5.60mx0.90m +1x6.20mx0.90m Groundfloor |
| 149 | F.Ffloor Tile-Toillet-1.14m x 1.95m+1.20mx1.95m |
| 150 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in Dado,including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.Kitchen-3.90mx1.50m F. floor 1 x 6.0m x 1.80m + 5.60m x 1.80= |
| 151 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover,etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 152 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 153 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravelbacking in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90 m diax 2.0 m deep soakway pit |
| 154 | Supplying all materials, labour, T&P and constructing Leach pit of the following size with1st class KB brick work in CM (1:4), 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work upto 0.60 mtr deep, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, including earthwork in open well escavation in all kinds of soil and refilling of cavity around the pit,watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.1.50 m x 1.05m x 1.05m deep |
| 155 | Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4Kg/cm2 soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and haunch top the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C. |
| 156 | Supplying & Fixing of Double skin wall panneling made of Alluminum anodised section framing conforming to standed aluminium section as Horizontal & Vertical Member with atleast 600mm center to center with 9mm thick BWR blocks ply and 4mm thick veneer finished with melamined polised on both the faces complete as per the Direction of EIC. as per SR 2022 Page No-234 5x (2.00 m x 0.75 )=9.0 |
AI Tender Summary
Tender Timeline
Jul 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender