Tender For Drilling Of Tubewell’S And Installation Of Pumping Machinery In Various Villages By Dth Rig. Method Only And All Other Work Contingent To Thereof. Name Of Site:- Abheypur, Garhi Bazidpur, Ghilanwas, Lokri, Sherpur, Rasiseena, M.P Gujjar, Lakh
Tender Value
3.18 Crore
Estimated cost
Bid Submission
14 Jul 2025
0 days left
EMD
6.37 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maholi → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Drilling of Tubewell’s and installation of Pumping Machinery in various villages by DTH Rig. Method Only and all other work contingent to thereof. Name of Site:- Abheypur, Garhi Bazidpur, Ghilanwas, Lokri, Sherpur, Rasiseena, M.P Gujjar, Lakhuwas, Sohna Dhani, Neerpur Rajput, Kalpari, Madapur, Ranyala F.Pur, Bawantheri Bass, Nangli, Ghata Samsabad, Maholi-1, Maholi-2, Maholi-3, Doha-1, Doha-2, Basai Khanzada, Teekri and Bhandoli Total
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of Odex casing shoe of Proper Size and ISI make complete in all respect. |
| 2 | Providing and fixing of Odex casing shoe of Proper Size and ISI make complete in all respect. |
| 3 | Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 .(200 LPM /210 M Head 15.00 BHPEach Make, KSB , Texmo, CRI, Kirloskar) |
| 4 | Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 . (220 LPM /210 M Head 17.50 BHP ) |
| 5 | Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 . (220 LPM /180 M Head 15.00 BHP ) |
| 6 | Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979(200 LPM 115 Mtr Head 12.50 HP) |
| 7 | Providing and fixing of Odex casing shoe of ProperSize and ISI make complete in all respect. |
| 8 | Providing and fixing of RCC ring and cover of suitable dia. To avoid intrusion of surface runoff of rainfall inside the borehole, including all fixtures, complete in all respects. |
| 9 | Supplying, erection, testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pumpmotor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979. LPM 200 Head 130 BHP 12.50 |
| 10 | Supplying, erection, testing and commissioning ofsubmersible pumping sets as per BIS SPECIFICATION No.8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pump motor setsshould be capable of pumping clear fresh cold water havingcharacteristics as specified in Clause4 of IS 8034-1989 andClause 4.1 of IS 9283-1979. LPM 200 Head 110 BHP 12.50 |
| 11 | Supplying, erection testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034 - 1989 (as amended up to date for pumps ) and IS 9283 – 1979 (as amended up to date for motor ) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause – 4 of IS 8034 – 1989 and clause 4.1 of IS 9283 – 1979 . (220 LPM /120 M Head 15.00 BHP ) |
| 12 | Labour for making filter on 219.10 mm dia ERW M.S. Pipe (ISI marked) with slot length 62.50mm and slot width 0.5mm to 0.75mm around the pipe by gas cutter or any suitable mechanism including cost of all consumable items complete in all respect to the satisfaction of Engineer-in-charge. |
| 13 | Providing and fixing of 2` i/d delivery pipe class B ISI marked of approved make complete in all respect to the satisfaction of Engineer-in-charge. |
| 14 | Resistivity survey with deep penetration, generator opetared, D.C. resistivity meter to kown the type of sub surface starta at different depths. Quantity of water likely to be available and depth of the tubewell to be installed to obtain fresh water in required quantity including transportation of equipments and manpower, submission of hard copy of resistivity survey with relevant technical date complete in all repect to the satisfaction of Engineer-in-charge. |
| 15 | Providing and fixing of cast iron (C.I) D plate of size 300mm dia x 10mm thikness having weight 7 kg to cover the top borehole fastened with nut and bolts and clamp placed on its top for holding the pump set and GI pipes lowered in the tubewell complete in all respect to the satisfaction of Engineer-in-charge. |
| 16 | Providing and fixing of G.I clamp 50mm wide and 10mm thick suitable for holding to 50mm G.I pipe class B and pumping machinery complete in all respect to the satisfaction of Engineer-in-charge. |
| 17 | Providing and fixing of 2` i/d nipple made out G.I pipe class B and welded with flange having holes for fasting with pipe and threaded at other end with 8 threads in one inch(25mm) complete in all respect to the satisfaction of Engineer-in-charge. |
| 18 | Inspection of tubewell with Geo Scanning borehole camera with display and data recorder to find out the fault and submission of suggestions regarding rectification of same to obtain the sand free water at site Including Transportation, Lodging, and Boarding. Detailed Analysis with Videography and Submission of Report, Video and also verifying the depth/ position of assembly complete in all respect to the satisfaction of Engineer-in-charge. |
| 19 | Development of tubewell by Over-pumping unit having suitable submersible pump for development of tubewell to ensure sand free discharge. All the equipment including POL and labour required for carrying out pumping tests but not limited to the following shall be arranged by the contractor at his own cost complete in all respect to the satisfaction of Engineer-in-charge:i) A suitable pump and prime mover (since power is not available at the well site).ii) Measuring devices for time, discharge and V-Notch orifice method water level recorder (digital water meter recorder/ steel tape engraved).iii) The contractor shall collected water sample in the presence of SDE/JE. This water samples should be handed over to PHED for further chemical analysis in Public Health Lab. |
| 20 | Drilling of 300 mm dia bore by DTH for drilling accoring to ISI specification No. 2800-1991 (Part-1) asamended upto date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils 190mm dia bore by DTH in hard rocky starta including the cost of all consumable store, fuel, oil, soil stabilizing material and transportation of rig and other accessories to the site of proposed bore and back complete in the satisfaction of the Engineer-in-charge. |
| 21 | Supplying and jointing 4 core service cable 25 sq mm of approved make with bare bunched aluminium conductor insulator and sheathed with PVC etc. with voltage grade 1100 volts marked with IS 694:1990 including cost of jointing, material, carriage, loading and unloading etc. complete in all respect to the satisfaction of Engineer-in-charge. |
| 22 | Providing and Fixing / lowering 7” (180 mm) Dia M. S Pipe ofthickness 6.4mm of 6 meter long marked IS 4270 asrequired for covering loose formation of soil during drilling process includingenlarging the existing drilling size at any depth to cover the loose formation ofbore complete in all respect |
AI Tender Summary
Tender Timeline
Jul 03, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender