Tender For Estimate For Electrification Of Da-Juga At Village Abdapur Under Talen D/C O&M Dn. Ngh.( Project No. 220473) - 140 Kg.,8.0 Mtrs. Long Pcc Pole 2 Xlpe Cable 1 Core Unarmoured 35 Sqmm Aluminium Conductor 1100 Volts 3 Clamp For 140 Kg Pcc Po, biaora-Madhya Pradesh

Tender For Estimate for Electrification of DA-JUGA at village Abdapur under Talen D/c O&M Dn. NGH.( Project No. 220473) - 140 Kg.,8.0 Mtrs. long PCC pole 2 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 3 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 4 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 5 Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 6 D.O.Mounting Channel 75x40x6mm 7 D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel 8 Transformer mounting Channel (100X50x6 mm.) 9 11 KV Top clamp 65X65X6 mm. angle type 10 11 KV V cross arm 65X65X6 mm. angle type 11 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 12 11 KV(45KN) Composite Polymer Disc Insulators 13 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 14 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 15 Danger Boards Enamelled 11 KV 16 Bi-metallic clamps Distribution Transformers Bushing 17 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 18 11 KV D.O. Fuse Unit Polymer type 19 9 KV Gapless type ( 5KA) Polymer for DTR 20 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 21 DTR 11/0.4 KV BIS Level-III Conventional 25 KVA 22 11 KV Strain hardware (T&C type) fittings 23 11 KV Pin Insulator Polymer Composit (5 KN) 24 MS strain plate 65x8mm 250mm long 25 PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR 26 Single phase Electronic meter with data downloading facility & box 5-30 Amps. 27 LT A.B Cable tension clamps (Galvanized) 28 LT A B cable Suspension clamps (Galvanized) 29 Clamps for neutral for AB Cable 30 Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) 31 Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) 32 Stay set complete without Stay wire 16 mm. (Painted) 33 STAY WIRE 7/3.15 MM.(7/10 SWG) 34 Stay Insulators 90X65mm 35 Back filling of poles with boulders. 36 Stone Block/Pre cast block for base pedding(450X450X75MM) 37 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 38 M.S.Nuts with Bolts 39 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 40 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 41 Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 42 Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector- 43 Concreting of structures & foundation (1:3:6) 44 Complete jumpering of DTR 45 Red oxide paint 46 Aluminium paint 47 Meter cum protection box for 25 KVA DTR 48 G.I. STRIP 25X3 MM1 49 G.I.Pipe 40 mm Dia C grade type 50 Bentonite compound powder 51 Galvanized nut & bolt with washer 52 EARTHING SET (40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP AND NUT BOLT) 53 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 54 DTR S/s fencing (31 feet) of 5 barbet fencing on PCC support of 7No, 6 Height 55 Double Gate (2No-2.5x5x) set of MS angle (25x25x4mm) with mesh & locking 56 Rack Bolt/Screw 57 Wooden Board 10x8 58 PVC Bush 59 Switch Board 60 G.I. Wire 3.15 mm. (10 SWG) 61 3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E 62 LED Lamp with 9 Watt (Complete) 63 MCB of 16 Amp 64 11 KV AB Switch Polymer type 400 Amp with Complete fitting 65 G.I. WIRES 4.0 MM (8 SWG) 66 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 67 Aluminium Binding wire and tape 68 Erection Cost 69 GST @ 18% on Total Material Amount and Erection Cost

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	09-07-2025	Corrigendum	Date	15-07-2025

INR 590 /-

INR 3.63 Lakhs /-