Tender For Renovation Of Room No 322 - Serg; 1 Renovation of Room No 322 - SERG , 4570 2 13.1.1, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 3 6.4.2 , Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 4 11.41A.1 : Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily11.41A.1 Double charge vitrified tile polished finish of size 11.41A.1.1 Size of Tile 600 x 600 @Rs.1286.60/-11.42 : “Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. (Rs.1286.60 minus Rs.735.30 equals Rs.551.30/-) 5 11.43 : Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness 6 11.48.2: Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction 11.48.2 Size of Tile 600x600 mm @ Rs.258.65/- 11.50 : Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles @ Rs.11.70/- (Rs.258.65 minus Rs.11.70/-equals Rs.246.95/- ) 7 11.47.2 ; Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of Tile 600x600 mm 8 21.1.1.2 : For fixed portion- Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 9 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 11 9.100.1 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 12 od1590/2021_2022 ; LMR : Supplying and fixing Aluminium handle with locking arrangements suitable for aluminium windows 13 LMR ; Supplying and fixing 300 mm Aluminium aldrop 14 od1647/2021_2022 ; LMR : Supplying and fixing I-max hinges 15 21.11.1 : Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless-steel screws etc. to the side hung windows as per direction complete. 205 X 19 mm 16 21.15.2 ; Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium 17 LMR ; Providing and fixing PVC-grid false ceiling of approved colour . The ceiling should be 100% non-porous, non-absorbent,and water proof, washable and should not emit any dust with class A fire rating and HACCP compiliant. The ceiling frame /grid structure shall be powder coated GI the amount inclussive of all labour and conveyance charge 18 13.88 ; Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 19 13.80 ; Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 20 13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work 21 13.114 : Melamine polishing on woodwork (one or more coat). 22 CI @ 34.55% Civil Works 23 20W LED fitting (1x1 feet) MR 24 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed using medium pvc conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire - 1.14.3 25 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.1 or 2 Module (75mmX75mm) - 1.27.1 26 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.25 A switch - MR 27 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.25 A socket outlet - MR 28 Supplying and fixing 5 A to 32 A rating, 240/415 V,10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required . Single pole 25A - 2.10.1 29 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B - 1.8.2 30 Cost index 34.55% of 14492 electrical
