Tender For Horizontal Project Field Electromagnet Assembly, bhubaneswar-Odisha

Tender For Horizontal Project Field Electromagnet Assembly; Horizontal Project Field Electromagnet Assembly: The Horizontal Project Field Electromagnet Assembly should consist of a Horizontal Project Field Electromagnet with following specifications Mechanical: Dimensions: 70 × 60 × 120 mm (x, y, z) Weight: < 2.2 kg Field Uniform Volume:x = 0±1 mm, y = 0±5 mm, (± 1%) forBxdz = ±0.1 mm for z >1 mm Field Operating Range: Bx: ±0.4 T (4000 G) at (0,0,2) mm; ±0.1 T (1000 G) at (0,0,12) mm Field Operating Range: Bz: Approx. 0 T (0 G) at (0,0,2) mm; ± 0.3 T (3000 G) at (±5,0,2) mm Coils: Resistance:(20°C) 0.85Ω Max Resistance:(75°C) ~1Ω High Current Inductance:0.013H Max Continuous Power (Air):±5A, ±5V (25W) Max Continuous Power (Water):±20A, ±20V (400W) Water Cooling (20°C):1.0liters/min, 2.0bar (0.26USG/min, 28psid) Max Pressure:6.7 bar (100 psid) The assembly should consist of one compatible Recirculating Water Chiller with following specifications: Refrigeration Capacity: 0.3 TR Capacity in W: 1100 W Capacity in Kcal/Hr: 1032 Kcal/Hr Cooling Medium for refrigerant: Air Recirculating Secondary medium: Water Specific gravity of cooling medium: 1 Specific heat: 1 Viscosity: 1 CP Water Temperature at Outlet of chiller: 5 to 25°C Water Flow rate through chiller.: 8.33 LPM Water Pressure: 4.6 Bar Refrigerant: R 134A Condensing Temperature: 54°C Evaporation Temperature: 12.5°C Voltage: 220 V 60 Hz Dimensions L × B × H in mm: 495 × 500 × 580 The assembly should consist of one Lab Jack with following specifications: Load capacity: 10 kg L (mm): 150 mm B (mm): 100 mm H (min, max) (mm): 75, 150 Vertical height adjustment by 1 mm pitch lead screw. Parallelism: 0.1mm for the entire travel M6 tapped holes on the top at 25 mm grid. M6 clearance slots at bottom Aluminium alloy & stainless-steel construction Black anodized The assembly should consist of one XY Moving platform with following specifications: Micrometer drive Resolution: 0.01 mm Travel: 50 mm load capacity: 30 Kg Straight line accuracy: 0.010 mm M6 mounting holes Base mountable The assembly should consist of one Motorised Rotation stage with following specifications: D (mm): 75 W (mm): 90 H (mm): 45 Load Capacity: 8 Kg Gear Ratio: 90:1 Maximum speed: 16 deg/sec Half Step Resolution: 0.01 deg Including Single-axis stepper motor controller and software Including LabVIEW source code Including necessary M6 Screws to fix these items The assembly should consist of four numbers of 12mm Diameter Posts with following specifications: Stainless steel Diameter: 12 mm Length: 40 mm Ground finish One end chamfered for easy access M4 & M6 threaded for mounting The assembly should consist of four numbers of Post holder for 12mm diameter Posts with following specifications: Aluminium alloy construction Length: 40 mm Black anodized finish M6 mounting hole Suitable for 12 mm diameter post The assembly should consist of oneM6 Metric Nylon Tipped Set-Screws with following specifications: Length: 14 mm One set should contain 10 numbers The assembly should consist of oneUPSwith following specifications: Capacity: 10 KVA/8 KW Phase: Single Phase with Ground Input Nominal Voltage: 230VAC Input Acceptable Voltage Range: 180-300 VAC Input Frequency Range: 46-54 Hz Output Nominal Voltage:208VAC/220VAC/230VAC Output Frequency RangeMains Mode: 49-51 Hz Waveform: Pure Sine Wave Battery Type: 12V SMF VRLA No. of Batteries: 16/20 Display: LCD Dimension:(590x250x830) mm The assembly should consist of16 numbers of Battery with following specifications: Battery Type: SMF UPS Battery Voltage: 12V Battery Capacity: 42 Ah Including Battery wire interlinks and installation with UPS .... more in document

INR 1770 /-

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB