}

Tender For Beautification Work Of Gangapul Tiraha Mendiya Chhur - Supplyof Cement 2 Supply Of Csand 3 Supply Of Fsand 4 Supply Of S/B 5 Supply Of Grit(Dalla) 6 Supply Of Brick 7 Supply Of Ms Iron 8 Providing And Fixing 18Mm Thick Gang Saw Cu, Mirzapur-Uttar Pradesh

Rural Development has published Tender For Beautification Work Of Gangapul Tiraha Mendiya Chhur - Supplyof Cement 2 Supply Of Csand 3 Supply Of Fsand 4 Supply Of S/B 5 Supply Of Grit(Dalla) 6 Supply Of Brick 7 Supply Of Ms Iron 8 Providing And Fixing 18Mm Thick Gang Saw Cu. Submission Date for this Tender is 10-07-2025. Bricks Supply Tenders in Mirzapur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49971572
Tender For Beautification Work Of Gangapul Tiraha Mendiya Chhur - Supplyof Cement 2 Supply Of Csand 3 Supply Of Fsand 4 Supply Of S/B 5 Supply Of Grit(Dalla) 6 Supply Of Brick 7 Supply Of Ms Iron 8 Providing And Fixing 18Mm Thick Gang Saw Cu
Tender
Indian
Uttar Pradesh
Mirzapur
10-07-2025

Tender Documents

Tender Details

Tender For Beautification Work Of Gangapul Tiraha Mendiya Chhur - supplyof Cement 2 supply of CSand 3 supply of FSand 4 supply of S/B 5 supply of Grit(dalla) 6 supply of Brick 7 supply of MS iron 8 Providing and fixing 18mm thick gang saw cutmirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills facias and similar locations of required size, approved shade, colour and texture Granite as per DSR 8.2.2.2. 9 Providing edge moulding to 18mm thickGrabite Stone counters, vanties etc, i/c machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in charge. DSR8.3.2. 10 Providing and fixing stainless steel (Grade304) railing made of hollow tubes DSR:10.28. 11 Construction of granular sub-base by providing well graded Material, Spreeding in Uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. 12 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification 15 including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / basecourse on well prepared surface and compacting with vibratory roller to achieve thedesired density. 13 providing and laying prime coat bitumen emulsion (SS-1) on prepaired surface of grangular base including cleanning of road surface and primer at the rate of .085 km /sqm using mechanical means as per technical specification clause 502 (including cost of bitumen) 14 providing and layinig tack coat with bitumen emulsion using emulsion distributer at the rate of 0.25on the prepared grangular surface treated with primer &cleaned clause 503 (including cost of bitumen) 15 Providing and laying dense ginded bituminous mnendam With higher capacity batch type IMP using crushed aggregates of specified giding, premised with bituminous binder @4.0 per,cent by weight of total mix and filler, tansporting the hot mix to work sit, lying with a hydrostaticpaver finisher with seusor control ot the requiredgrade, level and aligament,rolling with smooth wheeled, vibratory and tandem rollers to nchieve the desired compaction as per MoRTil specification clauso No. 505 completoin al respects.Grade-Ist 16 Providing and laying bituminous concrete with 100-120IPH batch type hot mix plant producing an average outputof 57 tonnes per lour using crushed aggregatesof specifiedgrading, premised with bituminous binder @5,4 ot 56. percent ofmix andfiller, transporting the hot mxi ot work site,laying with alydrostatic paver finisher with sensor controlto the required grade, level and alignment, rolling with[smooth wheeled, vibratory and tandem rollers ot achieve thedesired compaction asper MORTH specificationclause No509 complete in all respects 17 providing & laying of hot applied thermoplastic compound 2.5 mm thick i*ncluding rectrorising glass beads @ 250gms per sqm area, thickness of 2.5 mm is inclusive ofsurface applied glass beads as p e r IRC:35.The finished surface to be level, uniform and free form streaks and holes. Rates to be inclusive of all taxes, royalty; VAT etc and allT&P / machine material and labour required for proper completion ofwork (MORT& H N o803 18 Supply and fixing of cat eye on centre line for proper completion of work as per direction of E/l 19 Providing & fixingInformative Boards etc ccomplete 20 Providing & fixing Caution Boards etc.complete 21 Providing &fixing road delineatorpost 22 Uitility Shifting 23 Supply & fixing enogration Boardetc all complete

Key Value

Document Fees
INR 1000 /-
EMD
INR 72720.0 /-
Tender Value
INR 36.36 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail