Annual Rate Contract For The Purchase Of Furniture , Annual Rate Contract For The Purchase Of Furniture , 3 Seater Waitingarea,Overall Dimensions Of Chair,Seat Height - 43.5 Cm. Height - 78.5Cm. Width & Depth Of Chair As- Width-164.0Cm And Depth-70.0 Cm. Specification:- The Side Frame Assembly Shall Be Fitted To The Two Ends Of The Connecting Beam Assembly To Form The Leg-Cum-Armrest Assembly. It Shall Be Made Of 0 3.81 ±0.03Cm. X 0.2±0.016Cm. Thick Cmx0.L6cm And Black Powder Coated (Dft 40-60 Microns). The Ends Shall Be Fitted With Abs Moulded End Caps. It Shall Be The Connecting Beam Assy. Which Holds The Two Side Frames To Each Other.2 Nostie Members Shall Be Used To Connect The Side Frames. The Tie-Member Shall Be Of Dia 3.81 ±0.03Cm X 02±0.016Cm. Thick Cm X 0.16Cm And Black Powder Coated (Dft 40-60 Microns ). The Seat/Back Assemblies Shall Be Mounted On One Of The Tie-Member Which Shall Has 5.0 ±0.1Cm X 5.0 ±0.1 Cm X 0.5±0.1Cm. Thk 5.5 ±0.1Cm Long Ms. Std. Angles Welded To Mount The Seat And Back. The Seat Rest Assembly Shall Be Consists Of A Fabricated Inner-Frame Assembly Insitu-Moulded High Resilience (Hr) Polyurethane Foam Having Density = 45 +/-2 Kg/Cm3 With Hardness Load=25±2Kgf As Per Ls:7888 For 25%Compression Of The Foam. The Complete Moulded Seat Rest Assembly Shall Be Covered With A Replaceable Fabric Upholstery Cover. The Dimensions Of Seat Shall Be: 52.0Cm. (W) X 50.0Cm. (D) X 6.0Cm. (T). The Backrest Assembly Shall Be Flexing Type And Consists Of A Fabricated Inner-Frame Assembly Insitu-Moulded With High Resilience (Hr) Polyurethane Foam Having Density = 45 +/- 2 Kg/Cm3 With Hardness Load 14± 2 Kgf As Per Ls:7888 For 25% Compression Of The Foam. The Complete Moulded Backrest Assembly Shall Be Covered With A Replaceable Fabric Upholstery Cover. The Size Of The Back Shall Be 52.0Cm. (W) X 59.0Cm. (H) X 6.0Cm. (T) The Adj. Glide Shall Be Injection Moulded In Black Nylon & Fitted To The Front End Of Side Frame Assembly Along With Abs Moulded Adj. Glide Base To Take Care Or Unleveled Floor Surface. Overall Dimensions Of Chair Shall Be Seat Height - 43.5 Cm, Height - 78.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-164.0Cm And Depth-70.0 Cm. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , 3 Seater Waitingarea, Overall Dimensions Of Chair, Seat Height - 40.0 Cm. Height - 67.5Cm. Width & Depth Of Chair As- Width-163.0Cm And Depth-57.0 Cm. Specification: It Should Bemade Up Of Black Powder Coated Rectangular M.S.Erw Tube Having 8.0 ± 0.03 Cm X 4.0 ± 0.03 Cm X 0.2 ± 0.014 Cm Size.It Should Bechrome Plated Made Of Cold Rolled Steel With 0.12 ± 0.013 Cm Thinkness.It Should Bepowder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet (Din1623 Partl St-12 Grade) 0.14 ± 0.013 Cm Thickness.The Side Bar Should Bemade Of Chrome Plated Solid Steel 3.0 ± 0.03 Cm X 1.2 ± 0.3 Cm With Fluting And Plastic Inserts. The Shell Should Beassembled On The Cross Beam With Help Of M8 Bolts (Per Seat - 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam). , 3 Seater Waitingarea Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. Specification:The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. , 3 Seater Waitingarea, Overall Dimensions Of Chair, Seat Height - 44.1 Cm. Height - 78.5Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. Specification:Seat/Back Shell: It Is Powder-Coated Shell Made From Cold Rolled M.S. Sheet 0.12 ± 0.013 Cm Thickness With Circular Perforations.The Side Bar Is Made Of Cold Rolled M.S. Sheet 0.12 ± 0.013 Cm Thickness. The Shell Is Assembled On The Cross Beam With Help Of M8 Bolts.* Seat Size : 50.0 Cm (W) X 45.5 Cm (D)* Back Size : 50.0 Cm (W) X 56.0 Cm (H) 2. Cross Beam: It Is Made Up Of Cold Rolled Steel With 0.2 ± 0.02 Cm Thickness. The Crossbeam Is Powder Coated. It Is Covered With Plastic End Caps. 3. Leg: It Is Made Up Of Cold Rolled Steel With 0.12 ± 0.013 Cm Thickness. It Is Powdercoated. The Legs Are Fitted With Leveller Cups Covered With Ss304 Sheet.4. Armrest: It Is Made Of Ss304 Round Tube Of Ø 3.175 ± 0.03Cm X 0.12 ± 0.013 Cm Thickformed To Make An Oblong Shape. Nylon And Should Befitted Onto The Armrest Frame. , Acrylic Visitor Chair With Cushion(Standar Packing Of Chair 12 Nos Order Should Be Multiple12 Nos) , Storewel Plain Having 4 Adjustable Shelves.,Size: 1981 H X 916 W X 486 D Specification:- Overall Size Of916mm(W)X486mm(D)X1980mm(H) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Office Table,Size:- 1650Widthx 900 Depthx 728 Height Mm Specification:- Table With Cpu Hanger Size Shall Be1650widthx 900Depthx 728 Height Mm. Top Shall Be18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat( Epoxy Polyster) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube ,Finish Powder Coat ( Epoxy Polyster).The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat (Epoxy Polyster) Plus The Drawer Front Shall Be 0.8Mm Thick Crca Finish Powder Coat (Epoxy Polyster) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat (Epoxy Polyster)And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat (Epoxy Polyster) . The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Exeutive Office L Shape Table (Without Pedstal / Drawer) Size:- 1800 W X 900 D X 750 H Eru - 1550 X 450 X 705 Specifiction:- Tablesize Shall Be 1800 Width Mm X 900 Depth Mm X 740 Height Mm .Table Top Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate (Bdl) .Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading.The Modesty Shall Be 18 Mm Thick Plain Particle Board Ppb Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. Eru - Rhs Size Shall Be 1550 Widthx 450 Depthx 705 Height.The Top Of Eru -5216 Lhs Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate ( Bdl). Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. The Modesty Shall Be 18 Mm Thick Plain Particle Board (Ppb) Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading.Free Standing Ped With Castors Be 390 Mm (W) X 440 Mm (D) X 646 Mm (H). The Construction & Material Used Shall Be Welded Assembled , 0.8 Mm Thick Crca For Body Shell , Drawer Front & Tray , Front Side Stiffener ,Rear Aide Stiffener And 1.2 Mm Thick Crca Top Stiffener & Bottom Stoffener . The Drawer Fronts Shall Be Metal Front Straight Edge . Locking Shall Be 10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism For Box-Box-File Pedestal. The Top Panel Shall Be Metal Straight Edge Top. Castor Should Be Swiveling Non - Lockable Castors Mounted Below The Body Shell For Free Standing Full Height Mobile Pedestal And M8 Leveling Stud For Free Standing Pedestal . The Anti-Tipping Mechanism Shall Have Fifth Roller Arrangement Mounted Below File Drawer To Avoid Toppling Of Unit When File Drawer Is Pulled Out . Partition In Drawer Shall Be 1 No. Partition In Box Drawers With Lock Mounted . Plastic Pencil Tray Shall Be Optional Accessory . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Application Shall Be Suitable For Pushing Below Work Surface Which Has Got A Clear Height Of 725 Mm From Below . For Drawer Pulling Side Wise Tapered Recess Provided In Shell Behind Drawer Fronts. The Manufacturer Should Compilant And Shall Have Membership / Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Executive Office Table Size:- 1800 X 900 X 750 Specification:- Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Softclosing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Executive Tablemain Tables With Eru Attached Pedestal (L Shape Table) Main Table Size:-1800 X 900 X 750, Eru / Side Table :- 1200 X 450 X 750, Overall Size:- 1800 X 2100 X 750 Specification:-Desk Main Tables With Eru Attached Pedestal. Size: 1800 W X2100 D X750 H Primary Work Surface - Made Of 25 Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587 :1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Secondary Work Surface - Made Of 25 Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587 :1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Modesty Panel - Made Of 25 Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587 :1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Under Structure - Made Of 25 Mm Thick - Laminate Twin Board Of E1 - P2 Grade & Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Pvc Lipping. Integrated Pedestal - Made Of 25 Mm Thick - Laminate Twin Board Of E1 - P2 Grade & Approvedshade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Pvc Lipping. Drawer Frontsside Made Of 25 Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-1458 :1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Pedestal Construction Is Box - Box - File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Has Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opining. Pedestals Are Provided With Lock For Security The Manufacturer Should Compilant And Shall Have Membership/Certification Fromiso 9001:2015,Iso 14001:2015,Iso 45001:2018, Iso 50001 : 2018, Aiota, Greenguard, Griha, Indoor Air Quality &Bifma. , Executive Office Table, Size:- 1800 X 900 X 750 Specification:- Work Surface:Made Of Combination Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top And 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Softclosing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Modesty Panel:Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Under- Structure:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. The Manufacturer Should Compilant And Shall Have Membership / Certification Fromiso 9001:2015,Iso 14001:2015,Iso 45001:2018, Iso 50001 : 2018, Aiota, Greenguard, Griha, Indoor Air Quality &Bifma. , Executive Tablemain Tables With Eru Attached Pedestal (L Shape) Main Table Size:-1800 X 900 X 750, Eru / Side Table :- 1200 X 450 X 750, Overall Size:- 1800 X 2100 X 750 Specification:- Primary Work Surface:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Secondary Work Surface:Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Softclosing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Modesty Panel:Made Of 25Mm Thick Mdf One Side Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Under- Structure: Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal:Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. The Manufacturer Should Compilant And Shall Have Membership /Certification Fromiso 9001:2015,Iso 14001:2015,Iso 45001:2018, Iso 50001 : 2018, Aiota, Greenguard, Griha, Indoor Air Quality &Bifma. , High Back Chair (Net Back & Seat Fabric Cushion) Specification:- Seat Assembly: The Seat Is Made Up Of 1.5 ± 0.1 Cm Thick Hot - Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam. Seat Size: 51.8Cm (W) X 49.7Cm (D)Back Assembly: The Back Is Injection Moulded In Glass Filled Nylon Which Is Upholstered With Mesh Fabric.The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Poly Propylene Having An Adjustment Of 5.0 ±0.1 Cm. Back Size: 47.9 Cm(W) X 66.9 Cm (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+/-2 Kg/M3 And Hardness 16 ± 2 Kgf As Per Is:7888 For 25% Compression. Armrests (Adjustable) :The Height Adjustable Armrest Is Made Of Polypropylene And Can Be Adjusted To 6.0±0.1Cm Height.It Also Has Swivel And To And Fro Adjustment With Moulded Pu Armtop. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features: 360° Revolving Type. Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort. Tilt Tension Adjustment Can Be Operated In Seating Position. 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Seat / Back Tilting Ratio Of 1:2. The Mechanism Housing Is Made Up Of Hpdc Aluminium & Black Powder Coated (Dft 40 To 60 Micron) Headrest: The Headrest Sub- Assembly Is Made Up Of Injection Moulded Glass Filled Polypropylene Which Is Upholstered With Moulded Hr Polyurethane Foam And Fabric. It Has An Adjustment Of 3.0 ± 0.1Cm & It Is Assembled Over Full Back Chair. The Complete Headrest Assembly Is Retro Fit To The Main Chair. Pneumatic Height Adjustment: The Pneumatic Height Adjustment With An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly: The Pedestal Is Injection Moulded In 30% Glass-Filled Nylon And Fitted. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair ( Fabric Chair) Specification:- Seat/Back Assembly: The Seat And Back Should Bemade Up Of1.2 ±0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around.The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. High Back Size49.0 Cm. (W) X 71.0 Cm. (H) Seat Size 49.0 Cm. (W) X 44.0 Cm. (D). High Resilience (Hr) Poly Urethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 ±2 Kg/M3/ And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests :The One-Piece Armrests Made Of Black Integral Skin Polyurethane With 50-70 Shore ‘A’ Hardness And Reinforced With M.S. Insert.The Armrests Should Bescratch And Weather Resistant.The Armrests Should Befitted To The Seat With Seat/Armrest Connecting Strip Assembly Made Of0.5 ± 0.05 Cm. Thk. Hr Steel. Center Tilt Mechanism:The Mechanism Should Bedesigned With The Following Features: 360° Revolving Type. 17°±2° Maximum Tilt On Pivot At Centerupright Position Locking. Tilt Tension Adjustment. Pneumatic Height Adjustment : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. Telescopic Bellow Assembly: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm.(76.3 ±1.0 Cm With Castors).Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair (Fabric Chair) Specification:- Seat/Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. High Back Size 47.5 Cm. (W) X 69.5 Cm. (H) Seat Size 47.0 Cm. (W) X 48.0 Cm. (D). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.Center Tilt Synchro Mechanism The Mechanism Is Designed With The Following Features: · 360° Revolving Type. · 3 Position Locking · Tilt Tension Adjustment. Tubular Frame : The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Is Cantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Pneumatic Height Adjustment The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. Telescopic Bellow Assembly: The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly The Pedestal Is Injection Moulded In Black 33%Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. (76.3 ±1.0Cm With Castors).Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair (Leatherette Chair) Specification:- Seat/Back Assembly: The Back Is Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood & Seat Is Made Up Of 1.5 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Foam Lumbar Support. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.The Recron Filling Done Inseat & Backfor Extra Fluffiness And Comfort In Chair. The Chair Seat & Back Size Arehigh Back Size 51.5 Cm. (W) X 82.0 Cm. (H). Seat Size 53.5 Cm. (W) X 51.0 Cm. (D). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg/M3 And Hardness Load 14 ± 2 Kgf As Per Is:7888 For 25% Compression.Armrest: The 3-Way Adjustable Armrest Is Is Made Of Die-Cast Aluminium With Buffing Finish Designed With The Following Features :Up-Down Adjustment–7 Steps (7.0 ± 0.5Cm Range). It Has To & Fro Movement Along With Swivel Adjustment. Center Tilt Synchro Mechanism With Multi Lock : The Mechanism Is Designed With The Following Features: 360° Revolving Type. 3 Position Locking With Anti Shock Mechanism. Tilt Tension Adjustment 6. Pneumatic Height Adjustment : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 9.5 ± 0.3 Cm. Pedestal Assembly: The Pedestal Is Made Of Die-Cast Aluminium Withbuffing Finish. It Is Fitted With 5Nos. Twin Wheel Castor. The Pedestal Is 67.0 ± 0.5Cm Pitch-Center Dia. (77.0 ± 1.0Cm With Castors).Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership/ Certification From Iso 9001: 2015, Iso 14001: 2015, Iso 45001 :2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair (Knitted Fabricquilted Upholstery For Back) Specifiation:- Back Assembly: The Seat Is Made Up Of 1.2 + 0.1Cm Us. Hot Pressed ¿Iyv«Ood Measured As Per Qa Metlsoj Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Moulded Glass Filled Nylon & Upholstered Using Quilted Knitted Fabric. Seat Size(Standard Seat Depth) 47.0 Cm. (W) X 49.5 Cm. (D).Bank Size : 45 .0 Cm. (W) X 65.3 Cm. (H) High Resilience (Hrj Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density 45+/-2 Kg/M’ And Hardness In + 2 Kgf As Per Is: 7888 For 25% Compression. Armrests : The Adjustable Armrest Is Designed With The Following Features :Up-Down Adjustment— 8 Steps (8. 0+0 Scm Range).Height Adjustable Armrest Structure Which Is Chrome Plated & Fitted With An Armrest Top.Fixed Armrest Top Is Pu Moulded Over Metal Insertlumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Kncbs Provided On The Rear Side Of The Pad Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. 360° Revolving Typesingle Point Control.Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.Tilt Tension Adjustment.4-Position Locking With Anti-Shock Feature.Seat/Back Tilting Ratio Of 1:2.Pneumatic Height Adjustment : The Pneumatic Height Adjustment Has Adjustment Strokeof 10.0+-0.3 Pedestal Assembly : The Pedestal Is Febricated From 0.2 + 0.02 Cm Thick Hr Sheet, Chrome Plated And Assembled With Injectionblack Polypropylene Hut Cap And 5 Nos. Twin Wheelcastors. The Pedestal Is 66.0+0.Scm. Pitch-Center Dia. (76.0+1.0 Cm With Castors) Twin Wheel Castors: The Twin Wheel Castors Are In Ection Moulded In Black Nylon. Coat Hanger : The Coat Hanger Is Made Up Of Injection Moulded Plass Filled Nylon. The Coat Hanger Is Retro Fit And Is Fixed To The Back Assemblytwin Wheel Castors: Thetwin Wheel Castors Are In Ection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair (Net Back & Seat Fabric Cushion) Specification:-Seat/Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn. Seat Size (Standard Seat Depth) 47.0 Cm. (W) X 49.5 Cm.Back Size : 45.0 Cm. (/V) X 65.3 Cm. (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+/-2 Kg/M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression.Armrests : The Adjustable Armrest Is Designed With The Following Features :Up-Down Adjustment— 8 Steps (8 0+0.Scm Range). Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top.Fixed Armrest Top Is Pu Moulded Over Metal Insert. Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features.360° Revolving Type.Single Point Control.Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. » Tilt Tension Adjustment.4-Position Locking With Anti-Shock Feature.Seat/Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°.Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch Center Dia Is 66.1+0.5 Cmtwin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , High Back Chair (Net Back & Seat Fabric Cushion) Specification:-Seat/Back Assembly: The Seat Is Made Up Of 1.5 ±0.1Cm. Thick Hot-Pressedplywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered With Mesh Fabric.The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 5.0 ±0.1 Cm. The Chair Seat & Back Size Areseat Size 53.5 Cm. (W) X 51.0 Cm. (D). Mesh Back Size 51.0 Cm. (W) X 70.0 Cm. (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/M³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression.Armrests :The Adjustable Armrest Is Designed With The Following Features : Up-Down Adjustment– 6 Steps (7.2 ± 0.5Cm Range) Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert.Center Tilt Synchro Mechanism With Multi Lock : The Mechanism Is Designed With The Following Features: 360° Revolving Type. 3 Position Locking With Anti Shock Mechanism. Tilt Tension Adjustment. Headrest: The Headrest Sub-Assembly Is Made Up Of Injection Moulded Glass Filled Polypropylene Which Is Upholstered With Moulded Hr Polyurethane Foam And Fabric. It Has An Adjustment Of 4.0 ± 0.1Cm & It Is Assembled Over. The Complete Headrest Assembly Is Retro Fit To The Main Chair.Pneumatic Height Adjustment: The Pneumatic Height Adjustment With An Adjustment Stroke Of 9.5 ± 0.3Cm. 7. Pedestal Assembly : The Pedestal Is Injection Moulded In Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.1 ±0.5Cm.Pitch-Center Dia. (76.1 ±1.0Cm With Castors).Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Visitor Chair (Net Back& Seat Fabric Cushion) Specification:- Seat / Back Assembly : The Seat Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Mesh Fabricseat Size : 50.0Cm. (W) X 48.0 Cm. (D) & Back Size : 53.0 Cm. (W) X 39.0Cm. (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/M³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression. M.S. Powder Coated Frames For 4 Leg Chairs :The Powder Coated ( Dft 50±10 Microns) Welded Tubular Main Frame Is Made From Ø 2.54 ± 0.03 Cm X 0.2 ± 0.016 Cm And Ø1.6±0.3Mm X 0.16 ± 0.0128Cm M.S. E.R.W Tube. The Ø1.9 ±0.3Mm X 0.12 ±0.0096 Cm M.S.E.R.W. Tube Used As Connecting Member Between Lh & Rh Frames. Shoe : The Shoes Are Made Of Glass Filled Polypropylene Compound With And Pressed Fitted With Tubular Frame. Felt Is Provided Below The Shoes. Armrest : The Armrest Are Made Of Glass Filled Polypropylene Compound And Assembled Over The Tubular Frame. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 04 Nos Order Should Be Multiple04 Nos) , Visitorchair(Net Back& Seat Fabric Cushion) Specification:-Seat / Back Assembly : The Seat Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Mesh Fabric Seat Size : 50.0Cm. (W) X 48.0 Cm. (D) & Back Size : 53.0 Cm. (W) X 39.0Cm. (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/M³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression. M.S. Powder Coated Frames For 4 Leg Chairs :The Powder Coated ( Dft 50±10 Microns) Welded Tubular Main Frame Is Made From Ø 2.54 ± 0.03 Cm X 0.2 ± 0.016 Cm And Ø1.6±0.3Mm X 0.16 ± 0.0128Cm M.S. E.R.W Tube. The Ø1.9 ±0.3Mm X 0.12 ±0.0096 Cm M.S.E.R.W. Tube Used As Connecting Member Between Lh & Rh Frames. Shoe : The Shoes Are Made Of Glass Filled Polypropylene Compound With And Pressed Fitted With Tubular Frame. Felt Is Provided Below The Shoes. The Manufacturer Should Compilant And Shall Have Membership / Certification Fromiso 9001:2015,Iso 14001:2015,Iso 45001:2018, Iso 50001 : 2018, Aiota, Greenguard, Griha, Indoor Air Quality &Bifma. (Standar Packing Of Chair 04 Nos Order Should Be Multiple04 Nos) , Viisitor Chair ( Fabric Chair) Specification:- Seat/Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort.Back Size 49.0 Cm. (W) X 47.0 Cm. (H)Seat Size 49.0 Cm. (W) X 44.0 Cm.(D).High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 ±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The Armrest Tops Should Beinjection Moulded From Black Polypropylene. They Should Befitted To Tubular Armrest Supports Made Of Ø2.54 ±0.03Cm. X 0.16 ±0.0128Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). The Tubular Armrest Supports Hold Together The Seat And Back.Tubular Frame: The Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 02 Nos Order Should Be Multiple Chair 02 Nos) , Visitor Chair (Net Back & Seat Fabric Cushion) Specification:- Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (W) X 48.0 Cm. (D) Back Assembly: The Back Asembly. Should Bemade Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm. (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene.Tubular Frame: The Powder Coated (Dft 40-60.Microns) Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 02 Nos Order Should Be Multiple Chair 02 Nos) , Visitor Chair The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 02 Nos Order Should Be Multiple Chair 02 Nos) , Visitor Chair The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 02 Nos Order Should Be Multiple Chair 02 Nos) , Workstationwithout Under Storage, Size:- 1200 W X600 D X 1200 H Specification - Modular Desk Based System With 1200Mmht.Dfine Plus Legs Are Available For Work Top Level 750 Mm From Base. Wire Tray With Integrated Power Box & Switch Plate (8+3 Anchor Roma). Soft Closing Access Flap With Brush.Metal Modesty: Metal Modesty Is Made From 0.8 Mm Thick Crca. Metal Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Made Of 3 Mm Thick Hr. Screen: 18Mm Thk T Mold Fabric Screen On Studs Is Providing On Table Top. Worktop: 25Mm Thk Prelaminated Partical Board With Pvc Lipping.Cpu Trolly The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Computer Table, Dimensions W X H X D- 1200 X 750X 600 The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Staff Table,Size:- 1200 X 600 X 728 Specification:- Table Without Cpu Hanger Size Shall Be1200width Mmx 600Depth Mmx 728 Height Mm. Top Shall Be18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat( Epoxy Polyster) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube ,Finish Powder Coat ( Epoxy Polyster).The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat (Epoxy Polyster) Plus The Drawer Front Shall Be 0.8Mm Thick Crca Finish Powder Coat (Epoxy Polyster) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat (Epoxy Polyster)And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat (Epoxy Polyster) . The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Sofa Set 3 + 2 Seater Specification:- Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg/Cu.Mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg/Cu, Upholstered With Fabric Or Leatherette. Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. Leg Assembly : It Is A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Sofa Set 3 +2 Seater, 3 Seater Dimensions W X H X D (Cm) - 175 X 83 X 86,2 Seater Dimensions W X H X D (Cm) - 132 X 83 X 86.The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Plastic Chair With M.S. Powder Coated Under Structure Specification:- Shell : The Single Piece Seat Back Shell Is Made Up Of Injection Moulded High Impact Strength Glass Filled Polypropylene Polymer Compoundshell Size : 44.0 Cm. (W) X 50.2 Cm. (D) X 40.5 Cm. (H). M.S. Powder Coated Understructure Option (Sm6): The Powder Coated (Dft 50±10 Microns) Welded Tubular Frame Is Made From Ø 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm M.S. E.R.W Tube. The 0.16 ± 0.008 Cm Thk Crca Sheet Is Welded To Tubes For Fixing Shell To The Frame. The Shoe Is Made Of High Impact Strength Polypropylene Polymer Compound And Are Fitted At The End Of The Tubular Frame The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 04 Nos Order Should Be Multiple 04 Nos) , Plastic Chair With S.S. Understructure Specification:- Shell : The Single Piece Seat Back Shell Is Made Up Of Injection Moulded High Impact Strength Glass Filled Polypropylene Polymer Compound. Shell Size : 44.0 Cm. (W) X 50.2 Cm. (D) X 40.5 Cm. (H). S.S. Understructure -The Tubular Welded Frame Is Made From Dia 2.22 ± 0.03 Cm X 0.15 ± 0.0128 Cm Stainless Steel 304 Grade Tube Which Is Buff Polished. The 0.16 ± 0.008 Cm Thk Stainless Steel 304 Crca Sheet Is Welded To Tubes For Fixing Shell To The Frame.The Shoe Is Made Of High Impact Strength Polypropylene Polymer Compound And Are Fitted At The End Of The Tubular Frame. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 04 Nos Order Should Be Multiple 04 Nos) , Coffee Table The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Coffee Table /Center Table Glass,Specification:-It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Focing With Understructure. Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Book Case Specification:-The Configuration Of 914Mm(W)X320mm(D)X1742mm(H). The Unique Design Provides The Right Rigidity To The Top Hinged Doors , Which Shall Facilitate Easy Use. The Book Case Shall Be Made From Prime Quality Crca Steel With Anti Rusting Treatment. It Shall Have A Rigid Knock Down Construction. The Top Pannel, Back Pannel And Side Pannel Are Made From 0.7Mm High Yield Crca And Other Components From 0.8Mm Crca.Each Door Shall Have A 6 Lever Cam Lock With Common Key. 3 Mm Thick Glass Should Be Used In Each Door For Clear Inside Vision Whih Shall Be Secured In A Metal Frame Through A Rubber Gasket. Scissor Mechanism Should Be Provided In Each Door For Receding Inside The Top Of Every Compartment And It Shall Ensure Parallel And Smooth Movement. Each Door Should Be Provided With Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Shall Have A Storage Shelf With A Udl Capacity Of Max 80 Kg. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Dual Desk,Size:- 1048 X 895 X 750 Specification:- Desk Cum Bench Size Shall Be1048 Width Mmx 895 Depth Mmx 750 Height Mm.Top & Seat Panel Shall Be18 Mmthick Plb (Pre - Laminated Board )Withback Panelshall Be 18 Mm Thick Plt .The Under Structure Shall Bemssq Tubes Of Size25.4 Mmx 1.2 Mm Plus There Shall Also Be A Storageshelf . The Manufacturer Should Compilant And Shall Have Membership / Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Revolving Mid Back Chair Specification:- Seat/Back Assembly: The Seat And Back Should Bemade From 1.2 ±0.1 Cm.. Thk. Hot Pressed Plywoodmethod Described In.And Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. * Seat Size: 45.0Cm(W) X 42.0Cm.(D) * Back Size: 39.0Cm(W) X 47.0Cm.(H) Seat /,Back Covers: The Seat And Back Covers Should Beinjection Moulded In Black Co-Polymer Polypropylene High Resilience (Hr) Poly Urethane Foam : The Hr Polyurethane Foam Should Bemoulded With Density = 45 +/-21(G/Neand_Hardness Load 16_± 2 Kgffor 25%_Compression. Armrest Assembly : The One-Piece Armrests Should Beinjection Moulded From Black Nylon. The Armrests Should Befitted To The Seat With Armrest Connecting Brackets Made Of 0.5 ± 0.05 Cm. Thk. Hr Steel.Permanent Contact Mechanism: The Permanent Contact Mechanism Should Bedesigned With The Following Features360° Revolving Type. 14° ±2°Maximum-Back-Tilt-Only. Upright Position Locking. Tilt Tension Adjustmentpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm Telescopic Bellow Assembly: The Bellow Should Be.3 Piece Telescopic Type And Injection Moulded In Black Polypropylene Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be62.0 ±0.5Cm. Pitch-Centre Dia. (72.0 ±1.0Cm With Castors).Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 02 Nos Order Should Be Multiple 02 Nos) , Mid Back Chair Specification:- Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (W) X 48.0 Cm. (D) Back Assembly: The Back Asembly. Should Bemade Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm (W) X 60.5 Cm (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features:360° Revolving Type.17° ±2° Maximum Tilt On Pivot At Centreupright Position Locking.Tilt Tension Adjustment. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm. Telescopic Bellow Assy: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors.) Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership/Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Mid Back Chair Specification:- Seat/Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.Mid Back Size 47.5 Cm. (W) X 58.0 Cm. (H) * Seat Size 47.0 Cm. (W) X 48.0 Cm. (D) 2. High Resilience (Hr) Poly Urethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene.Center Tilt Synchro Mechanismthe Mechanism Is Designed With The Following Features: · 360° Revolving Type. · 3 Position Locking · Tilt Tension Adjustment 5.Pneumatic Height Adjustment - The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm.Tele Scopic Bellow Assembly: The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Is Injection Moulded In Black 33%Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. (76.3 ±1.0Cm With Castors). Twin Wheel Castors - The Twin Wheel Castors Are Injection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership/Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Lab. Stool,Width - 65 Cm , Depth - 65 Cm, Seat Height - 45 -56 Cm Specifiction:- Seat Assembly: The Seat Should Bemade Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Should Be Upholstered With Replaceable Synthetic Leather Covers.Seat Size: Diameter 40.0 Cm . Adjustments: 360° Revolving Type High Resilience (Hr) Polyurethane Foam:The_Hr.Polyurethane Foam Should Be _Moulded With Density = 45 +1-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Height Adjustment: The Manual Height Adjustment Should Bevery Easy To Operate With A Help Of A Knob.. It Can Be Easily Locked At The Most Comfortable Position. Pedestal Assembly: The Five-Prong Pedestal Should Befabricated From 0.2 ± 0.02 Cm Thick Hr Sheet( Should Be: Dd 10791 Hr ), Powder Coated ( Oft 40-60 Microns )And Fitted With An Injection Moulded Black Poly Propylene Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Should Be55.0±0.5Cm Pitch-Circle Diameter (65.0±1.0Cm With Castors)Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Laboratry Stool Specifiction - Ss Top Stool Mounted On Four Leg Base And Has Screw Nut Mechanism For Height Adjustment. It Has Ss Top Plate For Sitting Purpose. Over All Size – Base Outer Dia 538 Mm X Height Adjustable From 470 Mm To 655 Mm The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Canteen Table Size :- 1180 Width Mmx 750 Depth Mmx 750 Height Mm Specification:- The Top Shall Be In Stainless Steel Brushed Finish With Plb Insert For Durability . Easy To Clean And Maintain Hygiene . The Understructure Shall Have Side Frames Shall Be Made From 30 Mm X 30 Mm X 1.5 Mm Thick Ms Powder Coated Tubes At Base Which Are Welded And Are Fixed To Top With Screws . The Bottom Ends Are Closed With Plastic Bottles .Ms Shade : S/G Metallic Darkgrey . The Cross Member Shall Be Made From 30 Mm X 30 Mm X 1.5 Mm Thick Ms Powder Coated Tube , Which Is Welded And Bolted To Side Frames. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Canteen Table Size:- 1135 Width Mmx 1175 Depth Mmx 750 Height Mm . Specifiction:- Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Canteen Table Size:- 1734 Width Mmx 1175 Depth Mmx 750 Height Mm Specification:- Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. , Canteen / Dining Chair Specification:- Shell : The Single Piece Seat Back Shell Is Made Up Of Injection Moulded High Impact Strength Glass Filled Polypropylene Polymer Compound. Shell Size : 44.0 Cm. (W) X 50.2 Cm. (D) X 40.5 Cm. (H). S.S. Understructure -The Tubular Welded Frame Is Made From Dia 2.22 ± 0.03 Cm X 0.15 ± 0.0128 Cm Stainless Steel 304 Grade Tube Which Is Buff Polished. The 0.16 ± 0.008 Cm Thk Stainless Steel 304 Crca Sheet Is Welded To Tubes For Fixing Shell To The Frame.The Shoe Is Made Of High Impact Strength Polypropylene Polymer Compound And Are Fitted At The End Of The Tubular Frame. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications. (Standar Packing Of Chair 04 Nos Order Should Be Multiple 04 Nos) , Canteen / Dining Chair Specification:- Chair Ss Understructure The Seat & Back Are Made Up Of Injection Moulded High Impact Strengthpolypropylene Polymer Compound With Indoor Grade Uv Resistance Size Back Size: 51.6 Cm (W) X 40.5 Cm (H), Seat Size: 52.5 Cm (W) X 53.2 Cm (D). The Tubular Welded Frame Is Made From Dia 2.22+/-0.03 Cm X 0.16 +/- 0.0128 Cm 3.5 +/- 0.03 Cm X 0.16 +/- 0.0128 Cm Stainless Steel 202 Grade Tube. The Tubes Are Buff Polished To Give Shiny Finish. The Manufacturer Should Compilant And Shall Have Membership /Certification From Iso 9001:2015, Iso 14001:2015, Iso 45001:2018, Iso 50001:2018, Bifma, Griha, Aiota, Indoor Air Quality Certifications.
