Tender For Providing electrification to the renovated Chattambi Swami Park in Manakkadu Ward under City Corporation Thiruvananthapuram-- 1 90.12.1.12 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 4 sq mm 2 MR888 3 core 2.50 sq mm 3 od 356626/2022-23 Supply and fixing of Sintexmake junction box of size 140mmx140mm x95mm with connector suitable for terminating pole lighting as required 4 MR Supply, conveyance, installation of 10 feet long (approxi: 70 kgs Rs 168.82/kg) ornamental type downword single arm non corrosive smooth finish cast iron lamp pole on the existing concrete foundation using suitable size base plate with bolt and nuts with washersetc. as required 5 14.1 Excavation for foundation in soft soil including dressingof sides and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, with ina lead of 50 meters 6 14.7 Providing and laying in position cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) in foundation of pump DG set etc 7 14.10 Providing and laying in position reinforced cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) in foundation of pump DG set etc. including form work etc. as required ( excluding reinforcement) 8 14.12 Providing 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand ) at all levels 9 od125552/2024-2025 Supply and fixing wall flood light using 30 W LED Halogen Warm / green colour lamp for suitable fabricated bracket in the concrete base and giving connecton 10 od 226777/2023-2024Supply Conveyance, installation, testing and commissioning of 25W LED park light(ornamental type aesthetically designed pot top lamp with 360 degree light distribution suitable for50 mm dia post ) output greater than 105lumen/W 2000-3000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 11 5.4 Earthing with GI earth plate 600x600x6mm thick including accssories and providing masonry enclosure with cover platehaving locking arragement and watering pipe of 2.7m long etc. with charcoal/ coke and salt as required. 12 1.21.1 Supply and fixing of following sizes of medium class PVC conduitalong with accessories in surface / recess including cutting the wall and making good the same in case of recessed coduit . as required.20 sq mm 13 1.17.12 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 14 1.17.21 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm 15 2.3.2 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8 way, Double door 16 2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 17 2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 18 2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 19 OD1491531/2021-2022:Supplying and fixing 32A, 2 way neutral linkmounted on DMC/SMC base 20 OD1491532/2021-2022:Supplying and fixing 32A, HRC Fuse Base with HRC fuse Link 21 90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 22 1.32 Supplying and fixing suitable size GI box with modular plate and cover infront on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
