Tender For Material Supply For Kizhakkemoola Anganwadi, chengalayi-Kerala

Tender For material supply for kizhakkemoola anganwadi-- 1 Material supply for anganwadi 2 Portland cement 3 coarse sand(zone III) 4 sundries 5 laterite stone of size 35*20*20 cm 6 structural steel such as tees,angles,channels and R S joists 7 Red oxide,zinc,chromite primer 8 beam clamp 300-380 mm (450-1070 mm) 9 wall form panel (1250*450 mm) 10 corner angle 45*45*5 mm 2.50 long 11 column clamp 450*1070 mm 12 prop 2 m (2-3.5 m) 13 stone aggregate (single size):40 mm nominal size 14 stone aggregate (single size):20 mm nominal size 15 Hire charges of concrete mixer 0.25 to 0.40 cum with hopper 16 vibrator(needle type 40 mm) 17 stone aggregate (single size):10 mm nominal size 18 Twisted steel /deformed bars 19 adjustable span ESO+SI(2.35-3.40) 20 Mild steel round bar above 12 mm dia 21 flats upto 10 mm in thickness 22 rawl plug 50 mm(designation 10 nos) 23 Anjili wood scantls 24 Bright finished or black enameled mild steel butt hinges 100*58*1.90 mm 25 Bright finished or black enameled mild steel butt hinges 50*37*1.50 mm 26 Bright finished or black enameled mild steel screws 40 mm 27 Bright finished or black enameled mild steel screws 20 mm 28 Anjili wood planks 29 Float glass sheet of nominal thickness 4 mm(weight not less than 10 Kg/sqm) 30 50 mm*42 mm*2 mm thick factory made door frame of PVC extruded sections in white,grey or wooden finish 31 24 mm thick factory made shutters with styles ,rails and panels of PVC extruded sections in white,grey,wooden finish 32 fine sand(zone IV) 33 Oxidised mild steel tower bolt(barrel type)200*10 mm 34 Oxidised mild steel screws(30 mm) 35 200 mm aluminium aldrop 36 Brass 100 mm mortice latch and lock with 6 livers without pair of handles 37 Pair anodised aluminium liver handles for 100 mm mortice latch and lock 38 Anodised aluminium handles 125 mm with plate 175*32 mm 39 chromium plate brass screws 25 mm 40 ceramic glazed tiles first quality 300*300 mm in all shades and designs of white,ivory,grey,fume red brown etc 41 Pvc pipe 110 mm outer dia 6kgf/cm2 42 ceramic glazed tiles first quality minimum thickness 5 mm in all colors shades and design except burgundy,bottle green black 43 vitrified floor tile 50*50 cm 44 black plastic seat(solid )with lid C. P brass hinges and rubber buffers 45 vitrous china pedestal type water closet 46 flushing system pvc 10 lts capacity(low level)(white)(with fittings,accessories and flush pipe) 47 vitrous china flat backwash basin 630*450 mm 48 15 mmC.P brass tap 49 C P Brass waste 32 mm 50 C.I bracket for wash basins and sinks 51 stainless steel kitchen sink/without drain board 470*420 mm bowl depth 178 mm 52 PVC pipe 20 mm outer dia 10 kgf/cm2 53 PVC pipe 25 mm outer dia 12 kgf/cm2 54 iron hooks & eyes 100 mm 55 PVC pipe 75 mm outer dia 4 kgf/cm2 56 PVC pipe 75 mm outer dia 6 kgf/cm2 57 PVC door elbow 75 mm dia 58 PVC bend 75 mm dia 59 PVC door elbow 110 mm dia 60 PVC Vent cowl 75 mm dia 61 PVC Vent 110 mm dia 62 Brass full way valve with C.I Wheel (screwed end)25 mm dia 63 Polyethylene water storage tank with cover and suitable locking arrangement 64 Acrylic exterior paint 65 adjustable telescopic prop 3 m(2.02-3.75 m ) 66 Exterior primer

INR 1650 /-

INR 17200.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB