Renovation Of Dental Unit-- 1 25.1Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. 2 25.7Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including 3 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)Door 3 x 3.20 x 0.30 = 2.88wall 4 x 0.30 x 2.80 = 3.36 4 13.48.1Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 5 13.62.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 6 121.1.1.3Providing and fixing aluminium work for doors, windows, ventilators and partitions 7 21.3.2Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. 8 Sealing works with tkt panal 9 Interial furnishing with plywood 10 Supplying furniture as per requirementsExecutive Table 4’X2’ (Rubwood) with Chair1 NoVisitors Chair-6 nos 11 17.7.7Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P.brass pillar 12 18.21.2.1Providing and fixing u plasticisedPVC connection pipe with brass unions:45 cmlength15mm nominal bore 13 18.51.1Providing and fixing C .P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than690 gms.1 5mm nominal bore 14 18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 15 17.28.1.2Providing and Fixing P.V.C waste pipe for sink or wash basinincluding PVC. Waste filling complete, semi rigid pipe 40mm dia 16 18.17.2Provide and fixing gun metal gatevalve with C.I. Wheel of approved quality (screwed end) :32mm nominal bore 17 17.31Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers completed 18 od217579/2024_2025Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63mm dia line trap detailes of cost of oneno. 19 od217580/2024_2025Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110mm dia Multi trap detailes of cost of oneno. 20 od217581/2024_2025Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -50mm dia Tank connector detailes of cost of oneno. 21 50.18.7.3.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 25mm dia 12 Kgf/cm2 - internal work - Exposed on wall 22 50.18.7.4.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 32mm dia 10 Kgf/cm2 - internal work - Exposed on wall 23 50.18.9.8.1Providing and fixing PVC pipes including joining of pipes with one step PVC solevent cement, trenching, refilling & testing of joints completes as per the direction of Engineer in Charge. 75mm dia 6 Kgf/cm2 24 50.18.9.9.1Providing and fixing PVC pipes including joining of pipes with one step PVC solevent cement, trenching, refilling & testing of joints completes as per the direction of Engineer in Charge. 110mm dia 6 Kgf/cm2 25 50.18.9.13.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 25mm dia 12 Kgf/cm2 - Externalwork - Exposed on wall 26 50.18.9.14.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 32mm dia 10Kgf/cm2 - Externalwork - Exposed on wall 27 50.18.9.15.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 40mm dia 10Kgf/cm2 - Externalwork - Exposed on wall 28 50.18.9.17.1Providing and fixing PVC pipes, fittings including fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & testing of joints complete as per direction of Engineer-In-Charge 63mm dia 6Kgf/cm2 - Externalwork - Exposed 29 50.18.9.20.2Providing and fixing P VC moulded fittings/ accessories for Rigid PV C pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow 30 50.18.9.20.3Providing and fixing P VC moulded fittings /accessories for Rigid PV C pipes, including jointing with PVC solvent cement - 63 m m dia DoorElbow 31 50.18.9.20.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend 32 50.18.9.20.5Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x63x63 mm dia Tee 33 50.18.9.20.7Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl 34 50.18.9.22.1Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow 35 50.18.9.22.2Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 36 50.18.9.22.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Bend 37 50.18.9.22.5Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 x110x110mm dia Tee 38 1.10.1Wiring for light point/ fan point/ exhaustfan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modularplate,suitableGI boxand earthingthepointwith 1.5 sq.mm. FRLSPVC insulatedcopper conductorsinglecorecableetc asrequired. Group A 39 1.10.2Wiring for light point/ fan point/ exhaustfan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch,modularplate,suitableGI boxand earthingthepointwith 1.5 sq.mm. FRLSPVCinsulatedcopper conductorsinglecorecableetc asrequired. Group B 40 1.10.3Wiring for light point/ fan point/ exhaustfan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modularplate,suitableGI boxand earthingthepointwith 1.5 sq.mm. FRLSPVCinsulatedcopper conductorsinglecorecableetc asrequired. Group C 41 1.14.1Wiring for circuit/ submain wiring along withearth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 42 1.14.2Wiring for circuit/ submain wiring alongwithearth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 43 1.14.3Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire 44 1.21.1Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 45 1.24.1Supplyingandfixingfollowingmodularswitch/socketonthe existingmodularplate& switchbox includingconnections but excludingmodularplate etc. as required.5/6 amp switch 46 1.24.3Supplyingandfixingfollowingmodularswitch/socketonthe existingmodularplate& switchbox includingconnectionsbut excludingmodularplateetc. as required.15/16 amp switch 47 1.24.4Supplyingandfixingfollowingmodularswitch/socketonthe existingmodularplate& switchbox includingconnectionsbut excludingmodularplateetc. as required.3pin 5/6 ampsocketoutlet 48 1.24.5Supplyingandfixingfollowingmodularswitch/socketonthe existingmodularplate& switchbox includingconnectionsbutexcludingmodularplateetc. as required.6pin 15/16ampsocketoutlet 49 90.10.3.15Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator 50 90.10.1.2 Supply & Fixing the following types7 sizes of boxes suitable for modular accessories in surface/ recess includingmakinggoodthe damages,colourwashingetc as required(RoHScompliant)2 module mouldedplasticboxon surface 51 90.10.1.6Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess includingmakinggoodthe damages,colourwashingetc as required(RoHScompliant)8 module mouldedplasticboxon surface 52 1.28.1Supplyingand fixing followingModularbase & cover plate on existingmodularmetal boxesetc. as required.1or 2 Module 53 1.28.5Supplyingand fixing followingModularbase & cover plate on existingmodularmetal boxesetc. as required.8Module 54 1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, includingprovidingandfixing3 pin 5/6 amps modularsocketoutlet and 5/6 amps modularswitch, connectionetc. as required (for light plugs to be usedin non residential building) 55 1.33Supplyingand fixing 3 pin, 5 amp ceiling rose on the existingjunction box/ wooden block including connectionetc as required. 56 2.10.1Supplyingand fixing5 ampsto 32 ampsrating,240/415volts,Ccurve,miniaturecircuitbreaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testingand commissioningetc. as required. Single pole 57 2.10.4Supplyingand fixing5 ampsto 32 ampsrating,240/415volts,Ccurve,miniaturecircuitbreaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing 58 2.12.1Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioningetc. as required.40 amps 59 2.13.1Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 60 od222309/2024_2025Supplyingand fixing 15 W LED panel light on ceiling with standard make (Havells / Syska/ Crompton/ Equivalentas approved by the site engineer 61 od221496/2024_2025Supplyandinstallationof1200mm,20WLEDtube lightwithallaccessoriesasrequired. (Make: Crompton/Philips/Wipro) 62 90.4.5.2Supply, conveyance,installation, testing and commissioningof ceiling fans of the following sizes using standardaccessoriesexcludingresistancetype regulator,wiring the down rod with 16/0.20mmPVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -Sstar rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C 63 Poly Bath Acrylization/ Polymerization Unit 64 Polishing Lathe – 1,400/2,800 RPM, 0.40 kW 65 ALERIO NEO PORTABLE X-RAY 66 Electric Wax Knife Waxlectric I 67 Vibrator Small Size 68 Vacuum Mixer - Twister 69 Model Trimmer, MT3 with Klettfix Disc 70 Die Cutting Diamond Disc with Mandrel 71 Lab Micromotor, Brushless C Heavy Duty 72 Lab Micromotor, 35000rpm 73 Pre-Heating Furnace, Small, 1.7KW 74 Vacuum Pressure Induction Casting Machine+ Ind. Chiller 75 Micro Sand Blaster with 2 Jars, Basic Classic 76 Ceramic Firing Furnace with Vac.Pump, Programat 300 77 Ultrasonic Cleaner 78 Transportation and installation 79 MOUTH MIRROR WITH HANDLE --GDC 80 TWEEZER- GDC 81 PROBE-GDC 82 EXPLORER-GDC 83 CONDENSOR-GDC 84 BALL BURNISHER-GDC 85 T BURNISHER-#DOUBLE ENDED #TB2#3 86 SPOON EXCAVATOR-GDC 87 LACRON CARVER-GDC 88 PLASTIC FILLING INSTRUMENTS-GDC 89 CEMENT SPATULA-GDC 90 WAX SPATULA-GDC 91 WAX CARVER - GDC 92 WILLIAMS PROBE - PREMIUM # POW6#6 93 BONE FILE- GDC 94 BONE CURETTE - GDC 95 PERIO STEEL ELEVATOR-GDC 96 ARTERY FORCEPS (STRAIGHT/CURVED) 97 ARTERY FORCEPS - GDC 98 TOOTHED FORCEPS - GDC 99 NEEDLE HOLDER - GDC 100 SCISSORS- GDC 101 GRACEY CURETTESSINGEL PCS(sf/10#7) 102 GRACEY CURETTES C/C MINI FIVESSET OF 7 ##GCCCMSP7 103 PERIOSTEAL ELEVATOR MOLT 9 LARGE #P9#3 104 PERIOSTEAL ELEVATOR MOLT 9 SMALL # 105 PERIOSTEAL ELEVATOR #PREMIUM # 106 DIRECT SINUS LIFTING INSTUMENT (S/8) # 107 OSTEOTOME CONCAVE (S/6) IN POUCH # 108 MOUTH MIRROR WITH HANDLE 109 TWEEZER 110 SPOON EXCAVATOR 111 LACRON CARVER 112 H B CARVER 113 ENAMEL HATCHET 114 PLASTIC FILLING INSTRUMENTS 115 CEMENT SPATULA 116 WAX SPATULA - 117 WAX CARVER 118 WILLIAMS PROBE - 119 BONE FILE 120 PERIO STEEL ELEVATOR 121 Dental Dynamics DD Warwick James Elevator Set (3 Pcs) 122 *FULLY ELECTRICALLY OPERATED DENTAL CHAIR 123 AUTOCLAVE 124 COMPRESSOR S 125 SUCTIONS 126 Other Items 127 RVG Kodak 5200 128 CLINICAL MICRO MOTOR FULL SET – MARATHON 129 LIGHT CURE – WOODPECKER I LED 130 ENDO MOTOR WITH APEX LOCATOR
