Tender For Interior, Furnishing, It Infra And Shifting Work For Rkcl Office (Please Refer To Rfp For Detailed And Structured List Of Items), Jaipur-Rajasthan

TDR : 49967636

Tender Notice
BOQ

Expired

Jaipur , Rajasthan

Tender Brief : Tender For Interior, Furnishing, It Infra And Shifting Work For Rkcl Office (Please Refer To Rfp For Detailed And Structured List Of Items)

Document Fees
₹ 5000 /-

EMD
₹ 750000.0 /-

Tender Value
₹ 3.75 Crore /-

Submission Date
25-07-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	FURNITURE WORK Providing, fixing and laying as per drawing of linear workstation for ground floor size of 1200 x 600 mm with 45 mm thick 1200 mm high partition with combination of fabric pin up board & laminated writing marker with 25 mm thick table top supported on 18 mm thick gable ends made of wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate edge finished with 2 mm thick pvc edge banding tap. Partitions considered at Centre only with double raceway one at skirting level & one below the table top.
2	Providing, fixing and laying as per drawing of linear workstationfor ground floor size of 1425 x 600 mm with 45 mm thick 1200 mm high partition with combination of fabric pin up board & laminated writing marker with 25 mm thick table top supported on 18 mm thick gable ends made of wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate edge finished with 2 mm thick pvc edge banding tap. Partitions considered at Centre only with double raceway one at skirting level & one below the table top.
3	Providing, fixing and laying as per drawing of mobile drawer Unit (2D+1F) for ground floor made in 18 mm thick wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge Banding Tape. The Standard Size of Unit Is 450 W x 650 H x 450 D with channel sliding system of CPM standard & all the other necessary hardware such as lock & handles of Hettich / Hafele.
4	Providing, fixing and laying as per drawing of manager cabin table for ground floor size of 1350 x 600 mm with 25 mm thick table top supported on 25mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.
5	Providing, fixing and laying as per drawing of manager cabin table for ground floor size of 1500 x 600 mm with 25 mm thick table top supported on 25mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 900 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
6	Providing, fixing and laying as per drawing of manager cabin table for ground floor size of 2100 x 600 mm with 25 mm thick table top supported on 25mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 900 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
7	Providing, fixing and laying as per drawing of low height storage unit for ground floor size of 2250 W x 750 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
8	Providing, fixing and laying as per drawing of low height storage unit for ground floor size of 2850 W x 750 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
9	Providing, fixing and laying as per drawing of C.F.O. cabin designer table for ground floor size of 2100 x 900 mm with 36 mm thick table top supported on 36 mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 1950 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
10	Including designer back side storage for ground floor size of 3675 W x 2700 H x450 D.unit / self / openable glass self-made in 18 mm thick wooden ply / HDHMR BORD / MDF BOARD finished with 1 mm thick approved laminate with 2 mm thick Pvc edge banding tape. The standard size ofunit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
11	Providing, fixing and laying as per drawing of M.D. cabin designer table for ground floor size of 2450 x 900 mm with 36 mm thick table top supported on 36 mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 1950 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
12	Including designer back side storage for ground floor size of 4200 W x 2700 H x450 D.unit / self / openable glass self-made in 18 mm thick wooden ply / HDHMR BORD / MDF BOARD finished with 1 mm thick approved laminate with 2 mm thick Pvc edge banding tape. The standard size ofunit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
13	Providing, fixing and laying as per drawing of low height storage unit for ground floor size of 2100 W x 2800 H x 750 D mm made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
14	Providing, fixing and laying as per drawing of meeting table for ground floor size of 2450 x 1050 mm with 36 mm thick table top made in wooden ply / HDHMR BORD / MDF BOARD finished with 1 mm thick approved laminate with 2 mm thick Pvc edge banding tape of matching shade with 18mm thick prelaminated under structure framework.Including 2 nos. aluminium access flap for wire management & laminated cable riser or pvc snake for carrying wire from floor.
15	Providing, fixing and laying as per drawing of conference table for ground floor size of 7675 x 1800 mm with 36 mm thick table top made in wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap of matching shade with 18mm thick prelaminated under structure framework.including 2 nos.aluminium access flap for wire management & laminated cable riser or pvc snake for carrying wire from floor.
16	Providing, fixing and laying as per drawing of discussion table for ground floor size of 4-seater 900 mm día with 25mm thick table top made in wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap of matching shade with 18mm thickprelaminated under structure framework.
17	Providing, fixing and laying as per drawing of low height storage unit for ground floor size of 1950 W x 750 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
18	Providing, fixing and laying as per drawing of low height storage unit for ground floor size of 975 W x 2800 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
19	Providing, fixing and laying as per drawing of linear workstation for first floor size of 1075 x 600 mm with 45 mm thick 1200 mm high partition with combination of fabric pin up board & laminated writing marker with 25 mm thick table top supported on 18 mm thick gable ends made of wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate edge finished with 2 mm thick pvc edge banding tap. Partitions considered at Centre only with double raceway one at skirting level & one below the table top.
20	Providing, fixing and laying as per drawing of linear workstation for first floor size of 975 x 600 mm with 45 mm thick 1200 mm high partition with combination of fabric pin up board & laminated writing marker with 25 mm thick table top supported on 18 mm thick gable ends made of wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate edge finished with 2 mm thick pvc edge banding tap. Partitions considered at Centre only with double raceway one at skirting level & one below the table top.
21	Providing, fixing and laying as per drawing of mobile drawer Unit (2D+1F)for first floor made in 18 mm thick wooden ply / HDMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge Banding Tape. The Standard Size of Unit Is 450 W x 650 H x 450 D with channel sliding system of CPM standard & all the other necessary hardware such as lock & handles of Hettich / Hafele.
22	Providing, fixing and laying as per drawing of manager cabin tablefor first floor size of 1500 x 750 mm with 25 mm thick table top supported on 25mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 900 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
23	Providing, fixing and laying as per drawing of low height storage unitfor first floor size of 2200 W x 750H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
24	Providing, fixing and laying as per drawing of manager cabin tablefor first floor size of 2100 x 750 mm with 25 mm thick table top supported on 25mm thick edge banded gable ends & 18mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. Its Included drawer unit (2D+1F) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge banding tape. The standard size of unit is 450 w x 650 h x 450 d with channel sliding system of CPM standard with all necessary hardware such as lock & handles & hinges of Hettich / Hafele.Including side storage unit 1950 W X 750 H X 450 D (2D+2S) made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2 mm thick pvc edge with combo sliding drawer & openable laminated shutters & open shelves with all necessary hardware such as lock & handles & hinges ofHettich/ Hafele
25	Providing, fixing and laying as per drawing of low height storage unit for first floor size of 3600 W x 750 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
26	Providing, fixing and laying as per drawing of meeting table for first floor size of 2700 x 1050 mm with 36 mm thick table top made in wooden ply / HDHMR BORD / MDF BOARD finished with 1 mm thick approved laminate with 2 mm thick Pvc edge banding tape of matching shade with 18mm thick prelaminated under structure framework.Including 2 nos. aluminium access flap for wire management & laminated cable riser or pvc snake for carrying wire from floor.
27	Providing, fixing and laying as per drawing of meeting table for first floor size of 3000 x 1200 mm with 36 mm thick table top made in wooden ply / HDHMR BORD / MDF BOARD finished with 1 mm thick approved laminate with 2 mm thick Pvc edge banding tape of matching shade with 18mm thick prelaminated under structure framework.Including 2 nos. aluminium access flap for wire management & laminated cable riser or pvc snake for carrying wire from floor.
28	Providing, fixing and laying as per drawing of low height storage unit 975 W x 2800 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
29	Providing, fixing and laying as per drawing of free-standing running training table for first floor size of 750 x 525 with 25 mm thick table top supported on 18 mm thick edge banded gable ends & 18 mm thick modesty panel made of wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap.
30	Providing, fixing and laying as per drawing of open desk series cafe table for first floor size of 2100 x 900 mm with 25 mm thick table top supported on 50 x 50 square pipe powder coated u -type open desk metal under structure. *height 750mm
31	Providing, fixing and laying as per drawing of open desk series cafe table for first floor size of 2700 x 450 mm with 25mm thick table top supported on 50 x50 square pipe powder coated u -type open desk metal under structure. *height 750mm
32	Providing, fixing and laying as per drawing of low height storage unit 3975 W x 750H x 600 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
33	Providing, fixing and laying as per drawing of low height storage unitfor first floor size of 2100 W x 750 H x 450 D made in 18 mm thick wooden ply / HDHMR board / MDF board finished with 1 mm thick approved laminate with 2mm thick pvc edge banding tap. All necessary hardware such as lock & handles & hinges of Hettich / Hafele. tapper cut finger groove.
34	INTERIOR WORKFALSE CEILING WORK : Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of raw plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge including the cost of painting.
35	TILED FALSE CEILING WORK : Providing and fixing tiled false ceiling of approved materials of size 595X595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams per sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24X38 mm made from 0.30 mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mmcenterto center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm and size 24X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanizedbutterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200 mm center to centeralong main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
36	METAL FALSE CEILING WORK :Providing and fixing of perforatedMetal Tile Ceiling Systemcomprisingof Tile of 600mm wideand 600mm longmanufactured out of 0.7mm thick aluminiumalloy 3105with bevelededge of 4.15mm width height of 32mm. The tiles shall be perforated to 1.5mm dia with open area of 23%. The Tilewillbe manufactured on advanced includes severalleveling stages in the manufacturing process by approved manufacturers. Tile ends will be raisedwith pips and slops to ensure positive engagementinto the spring to enable for de-mounting of individualpanels. The Tile sides will be sufficientlyhigh to ensurea minimum deflection across the length of Tile. All Tileswill be bevel edged. The Tile shallbe epoxy polyester powder coatingin white colour. The Tile shallbe cllppedinto clip in rail of 0.5mm thick GI. inform of a grid system using a cross connector. The clipin rail shallbe supported from slab by means of rigidSuspension of 4mm G .I rod, Hold on Clamp with Clip. POWDER COATING SPECIFICATION: Aluminium PANELS, cleaned through eco friendly cleaning ,process and powder applied through electrostatic charged Automatic Carona technology spray guns and cured in combination of Infrared & hot air oven in a certified plant as Akzo International approved applicator .
37	ALUMINIUM METAL FALSE CEILING WORK : Providing and fixing of perforatedALUMINUM MetalCeiling Systemcomprisingof aluminium powder coated sectionsof 2\" x 1\" / 3\" x 1.5\" /4\" x 2\" (as per design )8\" / 10\"/ 12\" longmanufactured out of 0.7mm thick aluminiumalloy 3105with bevelededge spacing is as per design .The ceilingwillbe manufactured on advanced includes severalleveling stages in the manufacturing process by approved manufacturers. ceiling ends will be raisedwith pips and slops to ensure positive engagementinto the spring to enable for de-mounting of individualpanels. The aluminium sectionwill be sufficientlyhigh to ensurea minimum deflection across the length of ceiling.. The aluminium sections shallbe epoxy polyester powder coatingin approved colour. The aluminium section shallbe fixed over gypsum ceiling frame and screw into of 0.5mm thick GI. inform of a gypsum system using a cross connector. the seperate ms frame is required for support the fals ceiling .it shallbe supported from slab by means of rigidSuspension of 4mm G .I rod, Hold on Clamp with Clip. POWDER COATING /ZINC COATING SPECIFICATION: Aluminium PANELS, cleaned through eco friendly cleaning ,process and powder applied through electrostatic charged Automatic Carona technology spray guns and cured in combination of Infrared & hot air oven in a certified plant as Akzo International approved applicator . ( 3d view is inclose )
38	MODULAR PARTATION :Providing and fixing minimum 60-65 mm thk modular partition frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 3 different race ways with a separation on top ,bottom and 750 mm levelincluding necessary slots. The frame work consists of minimum five vertical upright a top horizontal section, bottom section and intermediate sections (minimum 40 mm x 30 mm) The frame structure covering and Top trim / side trim made out of Aluminum with powder coating (50 microns). All Aluminum Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 18 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 5 mm aluminum/ ironzinc coated approved colour and laser cutting (as per design) top and bottom panels of height 600 mm height from the floor level for outside facia. Inside facia = fabric panel with soft board with minimum 9mm thickness fabric board / 12 mm ply in middle section with approved fabric and design . The edges to be capped (as per approved design and drawing) Aluminum endtrim with powder coating. Cost to include that for provision of fixing switches & thenecessary cut out for the same. The height of the partition to be upto false ceiling hright. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc.Cost to include the supporting system to partitions & walls such as brackets / fasteners /joining posts / aluminum race ways 3 nos / wire management cleats / runners etc.(Basic cost of fabric Rs. 300/- per running meter.) measurment upto false ceiling height only.
39	PANELLINGWORK : Providing and fixing minimum 30-35 mm thk modular PANELLING frame work made out of CRCA MS of grade D minimum thickness of 1.5 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 3 different race ways with a separation on top ,bottom and 750 mm levelincluding necessary slots. The frame work consists of minimum five vertical upright a top horizontal section, bottom section and intermediate sections (minimum 40 mm x 30 mm) The frame structure covering and Top trim / side trim made out of Aluminum with powder coating (50 microns). All Aluminum Horizontal and vertical sections are extruded from AA 6063 American standard alloy with 12 HRC hardness of Architectural grade (IS 10259:1982) of 18 gauge minimum. The thicknesses of extruded sections vary based on its design and its point load bearing design engineering. The skinning / panels / tiles to be of 5 mm aluminum/ ironzinc coated approved colour and laser cutting (as per design) top and bottom panels of height 600 mm height from the floor level for outside facia. Inside facia = fabric panel with soft board with minimum 9mm thickness fabric board / 12 mm ply in middle section with approved fabric and design . The edges to be capped (as per approved design and drawing) Aluminum endtrim with powder coating. Cost to include that for provision of fixing switches & thenecessary cut out for the same. The height of the partition to be upto false ceiling hright. As per drawing & direction complete with all standard fittings & fixtures, leveling screws etc.Cost to include the supporting system to partitions & walls such as brackets / fasteners /joining posts / aluminum race ways 3 nos / wire management cleats / runners etc.(Basic cost of fabric Rs. 300/- per running meter.) measurment upto false ceiling height only.
40	FULLY TOUGHENED GLASS WORK (12MM THK TOUGHENED FLUTED GLASS ALUMINIUM PARTATION) (DORMA FITTINGS) ; Providing and fixing with aluminium slik frame fully glazed 8 mm thk toughened fluted glass panel fixed with necessary patch fittings including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jams including necessary fixtures, srews, sealent wherever required and ALUMINIM cover over patch fittings. Rate shall include necessary etching film / LOGO, approved patch fitting locking systems, any necessary hardware items.
41	ENTRANCE DOORS - WITH TOUGHENED GLASS (PATCHFITTINGS) : Providing and fixing frameless fully glazed 12mm thk toughened float glass fixed with necessary patch fittings(Dorma make) including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jams including necessary fixtures, srews, sealent wherever required and SS cover over patch fittings. Rate shall include necessary etching film / LOGO, approved patch fitting locking systems, 1 pair of 12” long S. S. (C Shape) Handles of approved make, floor springs, and any necessary hardware items.( DORMA MAKE Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cilinder - US 10, Handle - TG 9300 EQ - S 25mm dia X 300mm length)
42	SUN CONTROL FILM : Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by architect / RKCL.
43	FLUSH DOOR : Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per detail:35 mm thick . Decorative teak LAMINATE both side with handles, door closer, lock, stopper, all necessary hardware.
44	WOODEN PARTATION : Providing and fixing Hollow core partition wall using 50 x 30 mm Chir wood frame 600 mm c/c on both directions,door opening as per drawing with steel fittings antitermite treatment complete as per specifications using . Full height is 9 mm thick commercial ply with 1.00 mm mica with adhesive onboth sides.
45	LOW HEIGHT WOODEN PARTATION : Providing and fixing Hollow core partition wall using 50 x 30 mm Chir wood frame 600 mm c/c on both directions,door opening as per drawing with steel fittings antitermite treatment complete as per specifications using . Full height is 9 mm thick commercial ply with 1.00 mm mica with adhesive onboth sides.
46	STORAGE : providing & fixing of 19mm block board fabricated laminated front shutters cabinets with horizontal & vertical divisions for stacking of files as per design including all hardware- handles, catchers, stoppers, locks, hinges etc. of approved make and all insides enamel painted, all visible sides to be finished in approved pattern, style and shade laminate all board edges finished in TW beading french polished complete fine finish as per designs and as instructed by the architect/ bank.
47	RECEPTION TABLE : Providing and fixing reception table as per design table having size (2100 mmx 750mmx 750mm H) with side unit (1500mmx 450mmx 650mm), drawer pedestal, modesty panel, side unit, metal key board tray with mouse tray with provision for electrical race ways having profile and features as detailed in the drawing and technical specifications including all extrusions, switch sockets provision of cut outs etc. all complete.
48	ROLLAR BLINDS : Supplying and fixing Rollor Blinds of good quality and approved make made out of Imported fabric including Roller Mechanism and lock with chain system with all necessary hooks etc. complete as per direction and sample approved by engineer-in-charge.
49	PIN-UP BOARDS : Providing and fixing pinup boards. It consist 12mm thick soft boards of good density to be mounted over 12mm thick comm. ply. The soft board will be covered with a plain fabric (appox Rs.250 /Rmts. of approved colour) from front and edges. Suitable steam beach moulding 25mm x 25mm size to be fixed on all four sides and will be finished in melamine polish.Only soft bords provided on other than the partitions will be measured and soft board made in the partitions will be the part of the partition measurement (rate) and not consider separately.
50	WPVC LOUVERS : Providing and fixing of 8\" x 8\" wpvc louvers panel for desining on reption area . Fixed with selicon, screws .(desian as per finilased by architect / RKCL)
51	METALIC DESIGN PANEL : Providing and fixing of 12\" x 12\" hexagun / auctagun design metal design panlesfor desining on reption area . Fixed with selicon, screws .(desian as per finilased by owner)
52	WALL PAPER : Providing and fixing of wall paper for design in walls and ceiling as per finalized by architect /RKCL.
53	LOGO :Providing & fixing 12 mm th. Translucent arcyloc of required size with properLED lightining behind. The cutting should be done on CNC MACHINE with proper edge polishing made of measurment -per number.
54	LUXTURE PAINT : Providing and fixing of luxture paint on walls with pop punning on walls for smooth surfaces
55	CNC JALI CUTTING WORK :Providing and fixing of CNC Jali cutting on 10 mm MDF boardfinished with PU paint as approved design fixed with drawings.
56	MARBLE GANESH MURTI: Providing and fixing of White Marble 18\" Ganesh ji Moorti with 3\" Ht Marble Stand (As per Selection)
57	LOCKERS :Providing and fixing of steel 15 locker modular single units
58	COMPACTOR: Providing and fixing of moible filling compactor base for stroge purpose 1000 files godrej make
59	PLANTINING POTS : Providing & fixing of 2’Ht FRP planting pots for indoor plantation
60	ELECTRICAL WORKMAIN LT PANEL : Supply and installation of main LT panel, wall mounted front operated totally enclosed vermin proof, indoor non-drawout-cubicle type power panel fabricated out of 2mm thk CRCA sheet having gasketed hinged cover on each cubicle fully powder coated after 7 Tank treatment, incorporating horizontal and vertical sleeved copper busbars, complete with all internal wiring, danger board, 2 earthing legs, cable chamber etc as required, housing below mentioned switch gears / meter ( GA drawing of the panel got to be approved by Bank / Architect for fabricate the same.) 1No.,300,FP, Changeover Switch+ 1 no. , 300A,TP, MCCB with ELR(0-3A)and CBCT as Incomer .1 nos. 160A & 2 Nos 100 A, 6 nos. 63A, TPN, MCB outgoing . 1 no., 0-200A, Ammeter with CTand selector switch . 1no., 0-500V, Voltmeter with selector switch and fuse .1Set, TPN, Copper busbars of size 35mm x 5mm thk PVC insulated suitable for 400 Amp load . 1 Set, RYB, indicating lamps with resistors and fuses .\"Full Set as above
61	LT PANEL :Supply and installation of main LT panel, wall mounted front operated totally enclosed vermin proof, indoor non-drawout-cubicle type power panel fabricated out of 2mm thk CRCA sheet having gasketed hinged cover on each cubicle fully powder coated after 7 Tank treatment, incorporating horizontal and vertical sleeved copper busbars, complete with all internal wiring, danger board, 2 earthing legs, cable chamber etc as required, housing below mentioned switch gears / meter ( GA drawing of the panel got to be approved by Bank / Architect) 1No : - 160A,FP, Changeover Switch+ 1 no. ;- 160ATPMCCB with ELR (0-3A)and CBCT as Incomer , 3 nos ;- 40A & 2 nos.:- 63ATPN, MCB outgoing , 1 no.:- 0-125A Ammeter with CTand selector switch, 1no;-0-500V, Voltmeter with selector switch and fuse, 1Set, TPN, Copper busbars of size 20mm x 5mm thk PVC insulated suitable for 125 Amp load ,1 Set, RYB, indicating lamps with resistors and fuses, Full Set as above
62	Supply and installation of 4 way,TP&N \"MCB type Distribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door HORIZONTAL DB) 1 no., 40A, TPN, ELCB(100mA) incomer and 12 nos, 16A, SP, MCB outgoing
63	Supply and installation of 6 way,TP&N \"MCB type Distribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door HORIZONTAL DB) 1 no., 63A, TPN, ELCB(100mA) incomer and 18 nos, 16/20A, SP, MCB outgoing
64	Supply and installation of 8 way,TP&N \"MCB typeDistribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door HORIZONTAL DB) 1 no., 63A, TPN, ELCB(100mA) incomer and24 nos, 16/20A, SP, MCB outgoing
65	Supply and installation of 12 way,TP&N \"MCB typeDistribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door HORIZONTAL DB) 1 no., 63A, TPN, ELCB(100mA) incomer and36 nos, 16/20A, SP, MCB outgoing
66	Supply and installation of 4 way,TP&N \"MCB type Distribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door VERTICAL DB) 1 no., 40A, TPN, ELCB(100mA) incomer and2 Nos 32 A TP MCB & 6 nos, 20A, SP, MCB outgoing
67	Supply and installation of 6 way,TP&N \"MCB type Distribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door VERTICAL DB) 1 no., 63A, TPN, ELCB(100mA) incomer and 4 Nos 32 A TP MCB & 6 nos, 20A, SP, MCB outgoing
68	Supply and installation of8 way,TP&N \"MCB typeDistribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door VERTICAL DB) 1 no., 100A, TPN, ELCB(100mA) incomer and 6 Nos 32 A TP MCB & 6 nos, 20A, SP, MCB outgoing
69	Supply and installation of 12 way,TP&N \"MCB typeDistribution Board(double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin \"proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears ( Double door VERTICAL DB) 1 no., 100A, TPN, ELCB(100mA) incomer and 8 Nos 32 A TP MCB & 12 nos, 20A, SP, MCB outgoing
70	Supply and installation of SPN, DB for distribution of input power to UPSs as per SLD having below mentioned switchgears (Earth bar inside these DB should be insulated from the body) (UPS-INPUT- HORIZONTAL DB) 1 no, 63A, FP, Isolator incoming and 3 Nos. 40A, DP, MCB, outgoing
71	Supply and installation of 4 Way TPN, Vertical DBfor distribution of input power to UPSs as per SLD having below mentioned switchgears (Earth bar inside these DB should be insulated from the body) (UPS-INPUT-DB) 1 no, 63A, FP, Isolator incomerand 3 Nos. 40A, TP, MCB, outgoing
72	Supply and installation of SPN, DB for distribution to all computer power points on workstations, having below mentioned switchgears (Earth bar inside these DB should be insulated from the body) (UPS-OUTPUT-DB) 1 no, 40A, DP, MCB, incomerand 12 nos, 16A, SP, MCB, outgoing
73	Supply and installationof 20A, metal clad 3 pin socket with plug top along with 1no. 20A, SP, MCB, all housed in sheet metal powder coated 20 A DP MCB box for giving supply to A/C machines & vaults
74	Supply and installation of 300A,FP, auto Changeover switchin sheet metal enclosure for stabilizer bypass
75	Supply and installation of seperate50 KVAR APFC panel, floor/wall mounted front operated totally enclosed vermin proof, indoor non-drawout-cubicle type power panel fabricated out of 2mm thk CRCA sheet having gasketed hinged cover on each cubicle fully powder coated with following acessories. 1No.160A,TP, MCCBas incomer , 2 nos. of 50A 3P contactor & 1 no. 25A 3P contactor , 2 nos. 40A MCB & 1 no. 25A MCB , 2 nos. 20KVAR & 1no. 10 KVAR Capacitor,Suitable bus bar for connecting the contactors and MCB\"s, Capacitors, 1 no. 4 step APFC relay suitable for above arrangement , ON/OFF/TRIP push button for each capacitor, ON/OFF/TRIP indication lamp for each capacitor and 1 Set, RYB, indicating lamps with resistors and fuses for incomer.
76	CABELS / MAIN CABLES :- Supply and instalation of 1100V grade armoured cable having sector / circular shaped aluminium / copper conductor PVC insulated cores, laid up, PVC tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown at site and further as directed by Bank / Architect in the following sizes.
77	3 1/2 C X 120 Sq.mm Aluminium
78	3 1/2 C X 50 Sq.mm Al Cable
79	3 1/2 CX 35 Sq.mm Al. Cable
80	4C x 16 Sq.mm Copper
81	4C x 10 Sq.mm Copper
82	4C x 6 Sq.mm Copper
83	2C x 4.0 Sq.mm Copper
84	2Cx 10Sq.mm Copper
85	Supply and installation of end termination of above mentioned cables including compressed type brass glands, crimping type coper lugs, insulation tape etc. as \"required complete with earthing of glands in following sizes
86	3 1/2 C x 120/150/185 Sq.mm
87	3 1/2C X 50/35 Sq.mm
88	4 x 16/10/6/4 Sq.mm
89	2C x 10/4 Sq.mm
90	WIRING WORK : Supply & Installation of concealed point wiring using 600v grade 2R x2.5 Sq.mm and 1 Rx 1.5 Sq.mm copper conductor PVC insulated wires (with proper R,Y,B color code ) pulled through haevy gauge PVC conduits laid concealed over false ceiling or in wall chases including circuit wires from the relevant DB and also including 1.5 Sq.mm Green Colour Copper earth wire and provision of grid plate type ( ROMA) switches and sockets along with circut wiring of 2R x4.0 Sq.mm and 1 Rx 2.5 Sq.mm copper conductor PVC insulated wires (with proper R,Y,B color code )as approved by Bank / Architect. Each circuit feeding not more than 8 points / 800 W as per the following configuration.
91	Primary light points including the cost of 5A switch
92	Secondary light points looped from the above point
93	WALL FAN POINT WITH 5 AMP SOCKET AND 10 AMP SWITCH
94	5A plug point as primary point
95	Secondary 5A Plug point on switch board
96	Supply & Installation of 15A Plug Point Wiring with 2R x 4.0 Sq.mm and 1 Rx 2.5 Sq.mm, PVC insulated copper conductor flexible cabledirectly taken from DB for hotplate/geyser / zerox / fridge/ printer / server room / u.p.s. room along with circut wiring of 2R x6.0 Sq.mm and 1 Rx 2.5 Sq.mm copper conductor PVC insulated wires (with proper R,Y,B color code )
97	Supply & Installation of 32A industrial socket Point Wiring with 2R x 6.0 Sq.mm and 1 Rx 2.5 Sq.mm, PVC insulated copper conductor flexible cabledirectly from DB for server room / u.p.s. room
98	Supply & Installation of A.C. POINT WITH 16 amp mcb and industrial socket , Wiring with 2R x 4.0 Sq.mm and 1 Rx 2.5 Sq.mm, PVC insulated copper conductor flexible cabledirectly directly taken from DB for OUTER UNIT / A.C. UNIT
99	Supply & Installation of indicator Light point from main panel to MAIN area for indication of Mains power supply with wiring, indicator lamps etc.
100	Supply & Installation of exhaust fan point consisting of 5A socket near fan and switch on light switch board as per detail 1
101	Supply & Installation of wiring for Signages with 2R x2.5 Sq.mm and 1 Rx 2.5 Sq.mm, PVC insulated copper conductor flexible cable to be connected to the SPN D/D consumer unit installed
102	Supply and installation of point wiring for UPS or stabilized power plug points on workstations / table for computers using 3C X 2.5 Sqmm Cu. PVC sheathed white color flexible cable pulled through already laid floor raceways and taken upto table top using PVC rigid or flexible conduits run within wooden or metal partitions. Each point consisting of 3 Nos of 2 / 3 Pin sockets and 1 No 15A switch, wired together forming one point. Switches and sockets to be (ROMA). Earth wire to be of Green colour only. ( Only 2 tables served by one circuit from UPS DB)
103	Supply and installation of points similar to above but to be used as raw or UPS power point on the tables consisting of one 5/15A socket with switch of other color and flexible cable of black color & circuit taken from LIghting DB ( 4 tables served by one circuit from LDB/PDB) Taken through Raceways.
104	RACE WAYS: Supply and installation of raceways consisting of 12\" x 1.5\"x 3mmthick x 8\" longrectangular aluminium anodized c sections including chasing and refilling as per the route shown in the drawing and as approved by consultant at site including clamping for ceiling with fastner and clamping road at every 4\" distance and where open pipe ends .
105	JUNCTION BOX : Supply and installation of galvanised floor junction boxes with SS brushed finish 14 SWG ( 2mm Thick) cover properly fixed with screws, for above mentioned raceways , of size 300mm x 300mm x 50 mm depth, fabricated out of 2.5 mm thick G.I. sheet with proper cutouts on the sides for pipe entry & screwed top cover with rubber gasket and suitable knockouts for flexible conduit outlets as per the drawing enclosed. The rate should also include a S.S cover of size (450 mm x 450 mm x2 mm ) which required to be properly screwed to junction bax as required at site.
106	LIGHTING FIXTURES(Philips/Wipro/Thorn/Crompton) :- Supply and installation of lighting fixtures as per the details given below including necessary hardware such as clamps,nuts, bolts, nails, screws and suspension chains as required for fixing the fixtures in position as directed by architect / Consultant.
107	2x2 ft (24 W) LED Light Fitting of Philips/Crompton/Wipro including supplying and fixingfor Suitable for recess mounting on false ceiling.
108	1 X 36/18W Mirolta Patti Tubelight having white end caps & 4Mfd capacitor with lamp
109	1 X 38 W3\" x 4\" wide sectionbox type sespended pureline led light having white end caps & 4 Mfd capacitor with lamp
110	2 X PL18 W, CFL, Spotlight flush mounted having mirror reflector & FBH 150/218 with lamp /Wipro -WCP 27218 (2X 18 Watt)/ 15 Watt LED Lights with all fittings
111	3 W LED lamp suitable for Recess mounting Philips/Crompton/Wipro
112	250mm dia wall mounted exhaust fan of decorative plastic body and blade with louvers on the outside (Newtek/Cromton/Approved Equivalent)
113	1200 mm diameter Ceilingfan
114	450 mm diameter WALLfan
115	1.5 hp sumbersable pump for water lifiting
116	Water proff strip light with stater as per approved colour
117	EARTHING : Supply and installation of earth pit comprising of 600mm x 600mmx 3mm. thick copper plate buried at a minimum depth of 2.5 meter including necessary materials like charcoal,salt etc as required conforming to BIS standards having brick masonary chamber with hinged cover and watering arrangement.
118	Supply and installation of copper /GI earthing wires/strips in following sizes 8 SWG copper bare wire
119	Supply and installation of copper /GI earthing wires/strips in following sizes 12 SWG copper bare wire
120	Supply and installation of copper /GI earthing wires/strips in following sizes 25mm x 3mm thick GI strip
121	Supply and installation of Main bus for isolated earth comprising of 200mm x 40mm x 6mm thick copper bar fixed on insulated support and having 20 nos of holes and nut bolts studs for clamping the earth leads,all contained in MS/PVCbox of size 300mm x 200mm x 50mm deep and having transparent acrilic cover as approved by Bank / Architect.
122	MUSIC - CUM - PA - SYSTEM ; Supply and installation of point wiring for music - cum PA system comprising of 2x 1.0 sqmm stranded , copper conductor , flexible PVC insulated and PVC Sheathed wire pulled through 20 mm dia .PVC heavy gauge conduits and looped from one speaker to other and to the volume control and control switch wherever applicable and finally terminated at Tag Block.
123	Supply and installation of Philips / Bosch/Ahuja make music speaker flush mounted on the false ceiling with proper clamping arrangement
124	Supply and installation of volume control - cum - ON - OFF switch flush mounted on wall along with other electrical switches .The size and plate of the regulating knob should match with other switches nearby (MK make)
125	Supply and installation of 100 Watts BOSCH/Ahuja makeCentral Music System Amplifier and MP3/CD Player with FM facility of make Samsung/Onida/LG
126	ELECTRONICS ITEM
127	Providing, fixing and laying Samsung 32 L ConvectionMicrowave Oven (MC32B7382QC/TL, Black)
128	Providing, fixing and laying TCL 248 cm (98 inches) 4K Ultra HD Smart QD-Mini LED Google TV 98C755 (Black)
129	Providing, fixing and laying TCL 215 cm (85 inches) C655 Series 4K Ultra HD Smart QLED Google TV 85C655 (Black)
130	Providing, fixing and laying Aquaguard Aura 2X Life, Needs No Service for 2 Years \| Unconditional Warranty for 2 Years (Filters included) \| 8-Stage Purification \| RO+UV+Active Copper+Taste Adjuster \|Suitable for all Water Sources
131	Providing, fixing and laying crompton QuietPro Plus 90cm Inclined Kitchen Chimney with BLDC Motor 1800 m3/hr suction, Smart On & Intelligent Auto-Clean\|Silent Chimney\|Filterless\|Touch Sensor & Gesture Control CHD-QPPI90FLE-IND
132	Providing, fixing and laying Samsung 653 L, 3 Star (Double Door)( RS76CG8003S9HL) 2025 Model
133	Providing, fixing and laying ATLANTIS Select Tea Coffee Vending Machine With 7 Options \| Dedicated Hot Water Option
134	Providing, fixing and laying 150 kva Silent Kirloskar Diesel Generator
135	FIRE EXTINGUISHERS: Supply installation testing & commissioning of ISI marked
136	ABC type - 2Kg (Shelf life of 1 year)
137	ABC type - 5 /6 Kg (Shelf life of 1 year)
138	CO2 type -4.5 Kg (Shelf life of 1 year)
139	ABC type - 2Kg (Shelf life of 5 year)
140	CO2 type -4.5 Kg (Shelf life of 3 year)
141	A.C. WORK
142	Supply of VRF out door air-conditioning system unitscomprising of following items: supply of modular type outdoor set free units equipped with highly efficient 100% inverter scroll compressors. each outdoor unit should be with special heat exchanger, high efficiency dc inverter compressor, auto check function for connection error, auto address setting and in-built double stage oil separation to ensure minimum oil entrancement and proper lubrication. The condensing units should be capable for outside ambient 52 deg. c. (make: Daikin, O general, Mitsubishi, Hitachi) 100% inverter compressor 2 stage oil separation technique 20 HP ( Heating & Cooling)
143	18 HP ( Heating & Cooling)
144	12 HP ( Heating & Cooling)
145	Supply & fixing of Indoorunits ( Hi Wall unit with Cordless Remote) address setting and capacity as mentioned below. multispeedmotor,coil sectionwith DXcoil, outer cabinet, drain pan mechanism insulation, pipe connections, fresh air intake connector and individually controlled louver setting for cassettes and concelled unit above 3 hp have higher air quantity of 400 cfm/tr etc. of various capacities as per Hitachi specifications.
146	Hi Wall : .75 TR/.8 HP/585CFM
147	Hi Wall : 1.00 TR/1.5 HP/585CFM
148	Hi Wall : 1.65 TR/2.0 HP/585CFM
149	Hi Wall : 2.06 TR/2.5 HP/585CFM
150	Supply & fixing of Indoorunits ( 4 Way Cassette unit with Cordless Remote) address setting and capacity as mentioned below. multispeedmotor,coil sectionwith DXcoil, outer cabinet, drain pan mechanism insulation, pipe connections, fresh air intake connector and individually controlled louver setting for cassettes and concelled unit above 3 hp have higher air quantity of 400 cfm/tr etc. of various capacities as per Hitachi specifications.
151	4 Way Cassette :3.0 TR/3.75 HP/1175 CFM
152	4 Way Cassette :4.13 TR/5.0 HP/1565 CFM
153	Supply of Ref. Joints for indoor unit
154	Installation of VRF air conditioning system of following items
155	20 HPHeat Pump Type (Cooling & Heating ) , Lifting & Shifting
156	18 HPHeat Pump Type (Cooling & Heating ) , Lifting & Shifting
157	12 HPHeat Pump Type (Cooling & Heating ) , Lifting & Shifting
158	MS stand for outdoor unit
159	Installation ofindoor unit air conditioning system of following items
160	Hi wall units
161	4 Way Cassette
162	Commissioning of VRF systems including topping R410A gas per site requirements. Make: Dupont, Honeywell
163	Refrigerant Piping ;Supply installation testing and commissioning of Interconnectingrefrigerantpipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation betweeneach set ofindoor &outdoor units as perHITACHI STD. & specifications (or equivalent make),all pipinginsidethe roomshallbe properlysupportedwithMShanger. Brazing should be done with Actylene & Oxygen gases. Make:- Mandev, Maxflow or equilent (Copper Pipe) Make:- Accoflex, A-Flex or equilent (Insulation) Make:- Harris (Brazing Rod)
164	31.75 mm (1 1/4\")
165	28.6 mm (1 1/8\")
166	25.4 mm(1\")
167	22.7mm(7/8\")
168	19.05 mm (6/8\")
169	15.88 mm (5/8\")
170	12.7 mm(1/2\")
171	9.52 mm (3/8\")
172	6.35 mm(1/4\")
173	CABLE TRAY :Providing and fixing of GI cable tray with properly support complete with GI threaded . Cable Tray for copper piping (300 mm ) without cover
174	DRAIN PIPING: Providing and fixing rigid PVC25 mm dia pvc piping complete withfittings, supportsas per HITACHI STD.&specifications anddulyinsulatedwith6 mmthick closed cell nitrile rubber insulation.Make:- Supreme, Astral, K-wing or equilent
175	CONTROL CABLINING : Supply & fixing of control cum transmission wiring of 2 C X .75 Sq. mm Copper conductor cable alongwith conduite for looping between indoor & outdoor VRF system & to main Central remote controller system
176	3.00 TR CASSETTE AIR CONDITION UNIT :Supply & handing over the following equipment as per specifications , schudle and drawing atleast3.00 TR CASSETTE A.C. 5 star rated (Make: Daikin, O General, Mitsubishi, Hitachi) . Supply of a.c. type unit each comprising of an outdoor and single high wall mounded in door unit. condensing unit shall be complete with hermetically sealed rotary compressor and air cooledd condenssor with fan evaporating unit shall consuist of a fan section with dymamically balanced centrifugal fan driven by FHP motor , multi rows deep cooling cool of copper tubes with aluminium fins thermostatic expansion valve etc. the evaporating unit shall br equipped with synthetic fiber fiter, insulated drain pan safety controls thermostate all complete in a unit single face split unit. supply of high wall spilt unit with cordless remote.
177	Installation, testing and commissioning of CASSETTE A.C.
178	Providing & fixing of electrical wiring and COPPER refregent piping for CASSETTE A.C.
179	Providing & fixingcondensate drain water piping1\" dia p.v.c. duly insulated to nearest drain trap to be laid concealed .
180	Providing & fixingof MS stand for CASSETTE A.C.
181	Providing & fixingTIMERfor approved brand
182	CHAIR AND SOFA WORK CENTRE TABLE : Providing and supplying in position oval or rectangular centre table (3\" x 2\") to be made out of 2\" X 2\" teakwood frame including 12mm thk clear glass top with bevelled edges including bottom glass shelf with etching etc complete. The rate shall also include SS lining design to the teakwood frames including all the necessary hardware, fittings, fixtures as per manufactursrs specifications complete.
183	SIDE TABLE : Providing and supplying in position squre side table ( 1\"6; x 1\"6\") to be made out of 2\" X 2\" teakwood frame including 12mm thk clear glass top with bevelled edges including bottom glass shelf with etching etc complete. The rate shall also include SS lining design to the teakwood frames including all the necessary hardware, fittings, fixtures as per manufactursrs specifications complete.
184	SINGLE SEATER SOFA : Providing & Supplying of single seaterSofaof various types & categories (Single seater, Two seater & Three seater) etc complete as per the manufacturers specifications as mentioned below. The rights to select & approve the sofas & seating shall vest with the clients. The contractor shall submit brochures of manufacturer at the time of quoting for this item etc complete as per layout. The consultants reserve the right to select the sofas in line with the technical specifications envisaged & meeting the specifications standards expected. (Approved makes: Godrej / Durian / Featherlite) CHAIRS FOR OFFICERS/VISITORS AND MEETING ROOM Supplying & Installation of Office Chairs a) The seat & back are made of 1.20 cm thick hot-pressed plywood upholstered with fabric and polyurethane foam together with moulded ABS seat & back covers. The back foam should be designed with contoured lumber support for extra comfort having seat size 51x47 cm and back size 48x68cm approx.
185	TWO SEATER SOFA : Providing & Supplying two seaterSofa chairs of various types & categories (Single seater, Two seater & Three seater) etc complete as per the manufacturers specifications as mentioned below. The rights to select & approve the sofas & seating shall vest with the clients. The contractor shall submit brochures of manufacturer at the time of quoting for this item etc complete as per layout. The consultants reserve the right to select the sofas in line with the technical specifications envisaged & meeting the specifications standards expected. (Approved makes: Godrej / Durian / Featherlite) CHAIRS FOR OFFICERS/VISITORS AND MEETING ROOM Supplying & Installation of Office Chairs a) The seat & back are made of 1.20 cm thick hot-pressed plywood upholstered with fabric and polyurethane foam together with moulded ABS seat & back covers. The back foam should be designed with contoured lumber support for extra comfort having seat size 51x47 cm and back size 48x68cm approx.
186	THREE SEATER SOFA: Providing & Supplying three seaterSofa chairs of various types & categories (Single seater, Two seater & Three seater) etc complete as per the manufacturers specifications as mentioned below. The rights to select & approve the sofas & seating shall vest with the clients. The contractor shall submit brochures of manufacturer at the time of quoting for this item etc complete as per layout. The consultants reserve the right to select the sofas in line with the technical specifications envisaged & meeting the specifications standards expected. (Approved makes: Godrej / Durian / Featherlite) CHAIRS FOR OFFICERS/VISITORS AND MEETING ROOM Supplying & Installation of Office Chairs a) The seat & back are made of 1.20 cm thick hot-pressed plywood upholstered with fabric and polyurethane foam together with moulded ABS seat & back covers. The back foam should be designed with contoured lumber support for extra comfort having seat size 51x47 cm and back size 48x68cm approx.
187	CHAIRS : Providind and fixing of chair Depth 70 cm x width 70 cm x height 106 - 123.5cm seat ht. -44 - 45 cm. The polyurethane foam should be moulded with density =45 ± 2 kg/m3 and hardness + 20 ± 2 kg on Hampden machine at 25% compression. b) Chair should be provided with a synchro tilt mechanism which should offer features like forward tilt, self-regulating tilt tension + Manual override, 4 position tilt locking and anti-shock back mechanism which prevents the back rest from hitting the user when the lock should be released. The backrest consists of a drop lift mechanism, which can be adjusted in the range of 6.5 cm and can be locked in 5 steps for the better lumbar support. c) Chair should be provided with a gas lift mechanism for height adjustments. The pedestal should be injection moulded in black 30% glass filled nylon. The pedestal should be 60 cm pitch centre dia (70 cm with castors). The twin wheel castors are injection moulded in black nylon. All metal components are epoxy polyester powder coated with dry film thickness of more than 45 microns, salt spray test to withstand more than 1000 hrs, pencil scratch hardness more than 2H, other tests conforming to Class D, IS:6005:1970. Polyurethane arm rest & 5 twin wheel extra smooth castors.
188	Chair for executives(Godrej model- DIVA Revolving High Back with Fixed Loop Arms) / equivalent approved make of Featherlite / Wipro
189	Chair for Officers (Godrej model- DIVA Revolving High Back with Fixed Loop Arms) / equivalent approved make of Featherlite / Wipro
190	Chair for Visitors with cushioned seat and back and molded PVC hand rest Godrej, S-frame type,as per quality and design approved,of makes viz. Godrej Bravo/Featherite/ Wipro/Methodex make or equivalent as approved for visitors (Godrej model- DIVA Revolving Mid Back with Fixed Loop Arms) / equivalent approved make of Featherlite / Wipro
191	Chairs for Meeting Room (Godrej model- DIVA Revolving Mid Back with Fixed Loop Arms) / equivalent approved make of Featherlite / Wipro. Colour of the apholestry to be determined by Bank Engineer or Architect.
192	OUTER DEVELOPMENTWORKProviding ,Supply and installation of Black Marble Engraving Panel(8\"x4\")
193	Providing , fixing and laying of white Marble fountain (2 tier) 5\" dia and 5\" high as per dsign
194	Provising , fixing and laying of Plantation on outer area (As per drawing & Design)
195	Provising , fixing and laying of Glow sign Brand Board in led light with 3M sheet(3\"x12\")
196	Provising , fixing and laying of Shed for DG Set & Elec. Panel (As per drawing & Design)
197	Provising , fixing and laying of bollards light for outer development with steel base and led top surface (As per drawing & Design)
198	INFORMATION TECHNOLOGYDEVELOPMENTWORK Provising , fixing and laying of Cat6A UTP Cable- Comscope netconnect
199	Provising , fixing and laying of Cat 6A I/o Box double Port I o box with face plate and Back Box
200	Provising , fixing and laying of Cat-6A Field Ternimation Plug or RJ-45 Cat6A Ceiling Connetor
201	Provising , fixing and laying of Cat6A I/o Box Single Port with face plate and Back Box
202	Provising , fixing and laying of Cat-6A Field Ternimation Plug or RJ-45 Cat6A Ceiling Connetor
203	Provising , fixing and laying of Cat-6A 24 Port Patch Panel
204	Provising , fixing and laying of 12 Core MM OFC Cable Jell free
205	Provising , fixing and laying of LIU 24 Port Fully Loaded
206	Provising , fixing and laying of 15U Wall Rack with PDU1,Cable Manager4,Fan2, cantilever Tray1
207	Provising , fixing and laying of 12U Wall Rack with PDU1,Cable Manager4,Fan2, cantilever Tray1
208	Provising , fixing and laying of Cat-6A Patch Cord-1 Mtr
209	Provising , fixing and laying of Cat-6A Patch Cord-2 Mtr
210	Provising , fixing and laying of LC-LC MM OFC Patch Cord 1 Meter
211	Provising , fixing and laying of LC-LC MM OFC Patch Cord 2 Mtr/3Mtr
212	Provising , fixing and laying of LC-LC MM OFC Patch Cord 5 Meter
213	Provising , fixing and laying of LC-LC MM OFC Patch Cord 10 Meter
214	Provising , fixing and laying ofRaised Floor Unitiles
215	Provising , fixing and laying of DAC Cable
216	Provising , fixing and laying of Consumables Items:N/w Cables,Connectors,Power Cables,Mounting kits , Access Controleer Locks, Bottons etc
217	Provising , fixing and laying of Managed L-3 Switch 24 Port Switch for HA Mode
218	Provising , fixing and laying of Managed L-2 Switch Non-PoE 24 Port Switch
219	Provising , fixing and laying of Managed L-2 Switch PoE 24 Port Switch
220	Provising , fixing and laying of 24-Port KVM Switch
221	Provising , fixing and laying of Environmental Monitorining System-(Temp/Humudity/WLD,Smoke,Beaken)
222	Provising , fixing and laying of SFP -10G SM
223	Provising , fixing and laying of Wi-Fi AP 276 fit with Managed Controller
224	Provising , fixing and laying of SARVAM NX DBM VOCODER 64
225	Provising , fixing and laying of SARVAM IP SUB10
226	Provising , fixing and laying of SARVAM VOCODER CHN4
227	Provising , fixing and laying of SARVAM VMS CHN4
228	Provising , fixing and laying of SPARSH VP510E
229	Provising , fixing and laying of SPARSH VP210E
230	Provising , fixing and laying of SARVAM NX DBM VMS 64
231	Provising , fixing and laying of 8 Channel Network Video Recorder
232	Provising , fixing and laying of 32 Channel Network Video Recorder
233	Provising , fixing and laying of 10 TB Surveillance Hard Disk
234	Provising , fixing and laying of Rodent repellent system with required sensers
235	Provising , fixing and laying of Cat-6 & Fiber Cable Laying with required PVC/HDPE or other asseseriories
236	Provising , fixing and laying of LIU Insttalation
237	Provising , fixing and laying of Splicing
238	Dismental ,Shifting & Re-dressing of N/W Racks
239	Shifting & Integration of ISP network with IP Design , Planning , Network Segeration and Bandwidth Load Primary-Secondary or Load Balancing concept
240	Dismental, Lifting, Shifting,& Reassembling of Smart Racks with battery Bank
241	Dismental, Re-Insttalations and Re-Configuration of CCTV Active Equimements with Cemtralised View,Monitoring Setup
242	Dismental, Re-Insttalations and Re-Configuration of Wi-Fi Active Equimemnts with new added/Upgraded AP/Controller/Software
243	Bio-Matrix, access Controller and attendance Machine Dismental, Shifting, Re-Insttalation and re-configuration
244	Dismental of EPABX System,Shifting, Re-Insttalation, Re-Configurations with add-on hardware/licences and Integration with both Intercom System
245	Dismental of 20KVA Online UPS, Shifting and Re-Insttalation including Battery Bank
246	Dismental of ExistingCore N/W Switches , SAN Switch and Shifting, Re-Insttalation with add L-3 Switches in HA Mode and V-LAN Config concept for Network seperation
247	Dismental and Shifting of Network Cyber Security Unified Threat Management System with updation/New Configuration with New Setup changes
248	Dismental and Shifting of NetAPP Storage with required Config Setup
249	Dismental and Shifting of Huwaei Blade Servers with Required Setup
250	End to End Testing, Go-Live and IT/Network/Telecom/Office Automation setUp Handover with 3 Months
251	Provising , fixing and laying of Training ROOM Cum Video Conferencing Cum Board (Audio )Meeting
252	10 Seater Call center Setup with One administrator Desk

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Services Tenders

Space Planning and Designing Tenders

Furnishing Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Interior, Furnishing, It Infra And Shifting Work For Rkcl Office (Please Refer To Rfp For Detailed And Structured List Of Items), Jaipur-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Interior, Furnishing, It Infra And Shifting Work For Rkcl Office (Please Refer To Rfp For Detailed And Structured List Of Items), Jaipur-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us