Tender For Certain Repair To Steel / Wooden Furniture Of Married / Otm Including Caning / Painting / Polishing Under Bso Of Ge (Af) Srinagar.; 1 Schedule A Part-I (Wooden Furniture) 2 BED PLY WOOD TOP / BED HARD (FD-246-247) 3 Replacement of unserviceable legs, made out of Teak wood free from knots complete all as specified and directed. 4 Replacement of unserviceable long railmade out of Teak woodcomplete all as specified and directed. 5 Replacement of unserviceable short rail by conversion of long rail into short railcomplete all as specified and directed. 6 Replacement of unserviceable plywood of head board with plywood of 3.5mm thick with one side teak face covered with Teak Beading as per drawingcomplete all as specified and directed. 7 Replacement of unserviceable plywood of foot board with plywood of 3.5mm thick with one side teak face covered with Teak Beading as per drawingcomplete all as speciofied and directed. 8 Replacement of unserviceable supportingbatten with Teak wood complete all as specified and directed. 9 Replacement of batten of head board and footboard of Teak wood complete all as specified and directed. 10 Replacement of commercial plywood top 12 mm thick 6 ply, complete all as specified and directed. 11 S&F Head boars made out of teak wood and teak face ply in front and commercial ply at back, all as per drg and as apecified by Engr in charge.The head board shall be properly polished after prepration of surfaces to its glossy look. 12 S&F foot boars made out of teak wood and teak face ply in front and commercial ply at back, all as per drg and as apecified by Engr in charge.The foot board shall be properly polished after prepration of surfaces to its glossy look. 13 TABLE DINING 4 PERSON 1200x900x750mm (FD-1003) 14 Replacement of unserviceable top of table dining 4 persons and supply and fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 1st class hard wood beading all around the top and as directed. 15 Replacement of unserviceable legsof table dining 4 person as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed. 16 Replacement of unserviceable stiffnerof table dining 4 persons and Supply and Fixing new stiffner of teak wood as per drg and as directed. 17 Hard rubber buffers provided to the legs of the table, complete all as directed. 18 TABLE DINING 6 PERSON 1500x900x760mm (FD-1003) 19 Replacement of unserviceable top of table dining 6 persons and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including wooden beading all around the top and as directed. 20 Replacement of unserviceable legsof table dining 6 person as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed. 21 Replacement of unserviceable stiffner of table dining 6 persons and Supply and Fixing new stiffner of teak wood , complete all as shown on drawing and as directed. 22 Hard rubber buffers provided to the legs of the table, complete all as directed. 23 HAT STAND WITH MIRROR (FD-233) 24 Repair to Hat Stand with mirror by replacement of teak face plywood of 1000mmx710mm x 6mm to the front and back side of the frame. 25 Replacement of unserviceable looking mirror of size 440x300x 4mm thick make Modi Guard /Atul with teak wood beading , complete all as shown on drawing and as directed. 26 Replacement of 6 Nos of Brass peg sets of overall size 120mm x75mm to the Hat Stand ,rest all as shown on drawing and as directed. 27 Wooden Beading 28 Replacement of 18 mmx 6mm thick 1st class hard wood Teak ,flat wooden beading all around the exposed edges of wooden / stel furniture articles of, complete all as shown on drawing and as directed. 29 TABLE CENTRE 900x450x400mm (FD-274) 30 Replacement of unserviceable top of table centre and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including wooden beading all around the top of 1st class hard wood ,complete all as shown on drawing and as directed. 31 Replacement of unserviceable legs of table centre as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed. 32 Replacement of unserviceable stiffner of table centre and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed. 33 Hard rubber buffers provided to the legs of the table ,complete all as shown on drawing and as directed. 34 TABLE BED SIDE 450mm x230mmx510mm (FD-276) 35 Replacement of unserviceable rack /sides/top/bottom etc of table Bed Side and Supply and Fixing new rack of 18/19mm thick particle Boardexterior grade having teak face on one side and commercial on other side including 4mm thick teak wood beading at front of the rack , complete all as shown on drawing and as directed. 36 TABLE PEG 450x300x380mm (FD-277) 37 Replacement of unserviceable top of table Peg and Supply and Fixing new top of prelaminated particle board 18/19mmthick teak shade and white lamination on other side including 4mm teak wood beading all around the top, complete all as shown on drawing and as directed. 38 Replacement of unserviceable legs of size 362mmx50mmx30mm of table Peg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed. 39 Replacement of unserviceable stiffner of tablePeg and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed. 40 Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed. 41 TEAPOY WOODEN 600X450X540MM (FD-278) 42 Replacement of unserviceable top of teapoy wdn and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 4mm thick teak wood beading all around the top ,complete all as shown on drawing and as directed. 43 Replacement of unserviceable legs of teapoy wdn as per drg and Supply and Fixing new legs of teak wood ,complete all as shown on drawing and as directed. 44 Replacement of unserviceable stiffner of teapoy wdn and Supply and Fixing new stiffner of teak wood, complete all as shown on drawing and as directed. 45 Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed. 46 TEAPOY VERANDAH 900x450x400mm (FD-255) 47 Replacement of unserviceable top of teapoy verandah and Supply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination on other side including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed. 48 Replacement of unserviceable leg 20mm dia MS round pipe legs (Medium grade) of teapoy verandah and Supply and Fixing of new legs of 20mm dia and 1.6mm wall thickness ,complete all as shown on drawing and as directed. 49 Welding of joints where ever required, complete all as shown on drawing and as directed. 50 Provn of hard rubber shoes to the legs of the table , complete all as shown on drawing and as directed. 51 TABLE 900 x600 x760mm WITHOUT DRAWER (FD-284) 52 Replacement of unserviceable top of table and Supply andSupply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed. 53 Replacement of unserviceable legs of table as per drg and Supply and Fixing new legs of size 741mmx60mmx30mm of 1st class hard teak wood ,complete all as shown on drawing and as directed. 54 Replacement of unserviceable stiffner of table and Supply and Fixing new stiffner of 1st class hard teak wood ,complete all as shown on drawing and as directed. 55 Provn of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed. 56 TABLE 900 x600 x760mm WITH DRAWER (FD-283) 57 Replacement of unserviceable top of table and Supply andSupply and Fixing new top of prelaminated particle board 18/19mm thick one side teak shade and white lamination including 4mm thick teak wood beading all around the top, complete all as shown on drawing and as directed. 58 Replacement of unserviceable drawer of table and Supply and Fixing new drawer of seasoned kail wood to be provided with knobs duly polished complete all as shown on drawing and as directed. 59 Replacement of unserviceable legs of table as per drg and Supply and Fixing new legs of size 741mmx60mmx30mm of 1st class hard teak wood ,complete all as shown on drawing and as directed. 60 Replacement of unserviceable stiffner of table and Supply and Fixing new stiffner of 1st class hard teak wood ,complete all as shown on drawing and as directed. 61 Providing of hard rubber buffers to the legs of the table , complete all as shown on drawing and as directed. 62 TABLE DRESSING GENTS WITH MIRROR(FD-230, 231) 63 Replacement of old unserviceable damaged box of the table dressing gents, new box shall be made out of 18mm thick PPB andseasoned teak wood andknobs of SS shall be provided to the drawer, complete all as shown on drawing and as directed. 64 Replacement of unserviceable mirror of 4.0mm thick of Modiguard or Atul of the table including replacement of unserviceable 1st class hard wood teak beading of the mirror all aroundand replacement of 6mm thick plywood on the back side of the mirror, complete all as shown on drawing and as directed. 65 Replacement of prelaminated Sheet of the complete table dressing gents and providing new prelaminated sheet of 1.0mm teak shade to the table dressing Gents, complete all as shown on drawing and as directed. 66 Fixing only the table dressing Gents with mirror to the existing wall with the help of wooden L shapped brackets (2X to each table dressing gents) and approprate size anchor screws of size 6mm dia minimum and 4 long in length (L shapped brackets to be provided by the department only).3X glass shelves to be fix by the contractor in the partitions of the table dressing Gents to make functional the furniture itmem. (glass shelves to be provided by the department only) 67 TABLE DRESSING LADIES WITH MIRROR(FD- 251) 68 Replacement of old unserviceable damaged box of the table dressing ladies, new box shall be made out of 18mm thick PPB andseasoned teak wood andknobs of SS shall be provided to the drawer, complete all as shown on drawing and as directed. 69 Replacement of unserviceable mirror of size 1220mmx355mm x 5.5mm of the table including replacement of unserviceable beading of 1st class hard teak wood to the mirror and replacement of 6mm thick commercial plywood to the back side of the mirror, complete all as shown on drawing and as directed. 70 Replacement of prelaminated sheet of the complete table dressing ladies and providing new prelaminated sheet of 1.0mm teak shade to the table dressing Gents, complete all as shown on drawing and as directed. 71 Replacement of unserviceable sliding glass shutters and providing new glass shutters of size 300mmx300mmx4mm with the knobs for smoth sliding of glass shutters of the table dressing ladies , complete all as shown on drawing and as directed. 72 TABLE WRITING 1145X600X760MM (FD-275) 73 Replacement of unserviceable top of table writing and Supply and Fixing new top of prelaminated particle board 18/19mm thick teak shade and white lamination on other side including wooden beading all around the top, complete all as specified and directed. 74 Replacement of unserviceable drawer of table writing and Supply and Fixing new drawer, complete all as shown on drawing and as directed. 75 Replacement of unserviceable legs of table writing of first grade seasoned teak wood as per drawing complete all as specified and directed. 76 Replacement of unserviceable stiffener of first grade seasoned teak wood as per drawing complete all as specified and directed. 77 Replacement of unserviceable drawer door of table writing and Supply and Fixing new drawer door with hinges, complete all as shown on drawing and as directed. 78 Providing of PVC hard rubber shoes to thelegss of the table to make its balance complete all as shown on drawing and as directed. 79 SOFA SET 5 Seats/ 5 Seats (FD-281 /373 etc):- 80 Replacement of foam cushion of 32 density of size 550 x 530 x 100mmduly covered with tapestry cloth of shade and colour/quality as approved by engineer-in-charge, The rate of tapestery shall not be less to Rs 200/- per running meter. 81 S&F cover for foam cushion of size 555x530x100mm made out of tapestery cloth of approved pattern, texture, shade and colour with fixing a good quality zip at one side in replacement to the old damaged cushion cover. 82 SOFA SET 5 SEATER(TP / SPL) 83 Taking out the old damaged / wornout tapestery cloth, cloth hassion, cloth marking and damaged wooden parts of the sofa chairs, reparing the damageged structures and replacement of wooden membrances with kail wood memberances, providing new GI springs, cloth marking coir fiber, foam cushion 40 (d) and fixing of arms with peoper worksmanship.the tapestery cloth shall be of best quality and of approved pattern, colour / shade for covering the entire structure of the sofa chairs. 84 Dry cleaning to the entire seat / back/ arms/ base etc to any kind of chirs having tapestery / cloth letheritic etc like chair confrence/ chir revolving all kind/ chir easy / chair writing / chair cinema/ chir visitors etc with sy-detergents and other dry cleaning agents to clean the sufraces of seats and backs of chairs (including all surfaces expose to vision) etc to make the tapestry / cloth letheretic neat and clean, it also includes cleaning of handlles and the PVC base of the chair. Each chair includes its seat, back, base and all expose to vision portions 85 S&F in repairs 18/19mm thick Pre-laminated particle board one side teak face and one side white lamination (ISI Marked) for different table tops and other parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with 4mm thick 18mm wide well polioshed Teak Wood beading etc., complete all as specified and directed. 86 S&F in repairs 12mm thick Pre-laminated particle board one side teak face and one side white lamination (ISI Marked) for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern to make functional the furniture article, complete all as specified and directed. 87 S&F in repairs 12mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship, complete all as specified and directed. 88 S&F in repairs 18/19mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship, complete all as specified and directed. 89 S&F in repairs 4mm thick Plywood commerial for different parts of furniture of OTM / MD steel furniture / Wooden furniture, of existing size and pattern with using approprate size screws whereever required, fevicol SH, teakwood beading if required to the exposed surfaces with full worksmanship, complete all as specified and directed. 90 S&F in repairs hardwood teak (scantling) after remaoving damaged parts of wooden / steel furniture with suitable sizes as required in repairs to make functional and useable the furniture items with the help of fevicol SH, apprprate size screws, bamboo pins with proper worksmanship, complete all as specified and directed. 91 S&F SS knobs of approved shape to the furniture items like, table computer, table dressing gents, table dressing ladies etc with approprate size nut bolt and washir, complete all as specified and directed. 92 4 LONG DRAWER HANDLE 93 S&F SS Handles 4 longto the wooden / steel furniture where ever required for different Drawers of tables, dressing tables, table bed side, Side boards, Bin linenes, keyboars, mouse boards etc in repairs with approprate size SS screws with washiers to make functional the furniture articles. 94 CHAIR DINING (FD-279) 95 S&F in Replacement of unserviceable front legs of hard wood teak as per drawing complete all as specified and directed. 96 S&F in Replacement of unserviceable rear legs of hard wood teak as per drawing complete all as specified and directed. 97 S&F in Replacement of unserviceable front/side rail of hard wood teak as per drawing complete all as specified and directed. 98 S&F in Replacement of unserviceable stiffener of hard wood teak as per drawing complete all as specified and directed. 99 Hard PVC buffers to be provided to the chair dining complete all as specified and directed. 100 CHAIR DINING LONG BACK / Officers(FD-357/ MAP) 101 S&F in Replacement of unserviceable front legs of hard wood teak as per drawing complete all as specified and directed. 102 S&F in Replacement of unserviceable rear legs of hard wood teak as per drawing complete all as specified and directed. 103 S&F in Replacement of unserviceable front/side rail of hard wood teak as per drawing complete all as specified and directed. 104 S&F in Replacement of unserviceable stiffener of hard wood teak as per drawing complete all as specified and directed. 105 Hard PVC buffers to be provided to the chair dining complete all as specified and directed. 106 S&F in Replacement of unserviceable seat cushion 32 (d) duly shapped and size as per the seaat and covered with approprate and approved coloured tapestery cloth. 107 Replacement of cushion cover made out of tapastery cloth / cloth letheritic as approved to make functional the cushion of the chair dining. 108 CHAIR WRITING (FD-280) 109 S&F in Replacement of unserviceable front legs of hard wood teak as per drawing complete all as specified and directed. 110 S&F in Replacement of unserviceable rear legs of hard wood teak as per drawing complete all as specified and directed. 111 S&F in Replacement of unserviceable arm of hard wood teak as per drawing complete all as specified and directed. 112 S&F in Replacement of unserviceable front/side rail of hard wood teak as per drawing complete all as specified and directed. 113 Hard PVC buffers to beprovided to the chair writing complete all as specified and directed. 114 CHAIR EASY (FD-229) 115 S&F in Replacement of unserviceable front legs of hard wood teak as per drawing complete all as specified and directed. 116 S&F in Replacement of unserviceable rear legs of hard wood teak as per drawing complete all as specified and directed. 117 S&F in Replacement of unserviceable arm of hard wood teak as per drawing complete all as specified and directed. 118 S&F in Replacement of unserviceable front/side rail of hard wood teak as per drawing complete all as specified and directed. 119 Hard PVC buffers to be provided to the chair easy complete all as specified and directed. 120 Canning to wooden furniture:- Recanning of wooden furniture articles with 2mm wide half round plastic cane of white/cream shade (Premium Brand). Canning shall be done as per Godrej pattern complete and fixing of border on cane holes with 4 mm wide cane in white colour, all as specified and directed. 121 Chair Dining wooden 122 Chair Easy wooden 123 Dstool Dressing 124 Chair Writing 125 TABLE WRITING (FD-275) 126 S&F in Replacement of unserviceable top of table writing and S&F new top of prelaminated particle board 18mm thick teak shade and white lamination on other side including wooden beading all around the top duly polished complete all as specified and directed. 127 S&F in Replacement of unserviceable lock of table writing and S&F new lock ofGodrej make, complete all as shown on drawing and as directed. 128 S&F in Replacement of unserviceable drawer of table writing and S&F new drawer, complete all as shown on drawing and as directed. 129 S&F in Replacement of unserviceable legs of table writing of first grade seasoned teak wood as per drawing complete all as specified and directed. 130 S&F in Replacement of unserviceable stiffener of first grade seasoned teak wood as per drawing complete all as specified and directed. 131 S&F in Replacement of unserviceable drawer door of table writing and S&F new drawer door with hinges, complete all as shown on drawing and as directed. 132 Provn of PVC hard rubber shoes to the legs of the table to make its balance complete all as shown on drawing and as directed. 133 POLISHING TO FURNITURE ARTICLES:-Polishing to wooden furniture including preparation of surfaces,removingdust and dirt by scratching with sand paper and filling putty and making smooth surfaces for applying polish of best quality from Asian/Nerolac/Shalimar after preparation of the surface by hiding the cracks and joints rest all as .The Polishing will be done as directed by Engr –in charge at site(site of work includes the placeswhere furniture items are issued and in use at different locations of Wing) 134 Almirah large wooden with shelves 135 Almirah medium Wooden with shelves 136 Bed Hard wdn all types 137 Book case small wooden 138 Chair writing 139 Chair dining 140 Chair W/B w/o arms 141 Chair Easy FD - 229 142 Hat stand with mirror FD - 233 143 Chair Dining long Back / Officers / MAP 144 Rack storage 7 x 2.5 x 6 145 Rack side 4 spaces 146 Rack riffle for 6 riffles 147 Rack riffles for 22 riffles 148 Stool dressing 149 Side board 150 Sofa set 4 seats FD-281 151 Sofa set 5 seats 152 Trestle store room wooden 153 Table office clerk wooden 154 Table centre FD - 274 155 Table writing 156 Table peg 157 Table dining 900 x 900 x 760 mm 158 Table dining 04 person FD/MAP/11/03 159 Table dining for 6 person 160 Table dining for 8 person 161 Table dressing gents with mirror 162 Table dressing ladies with mirror 163 Table bed side 164 Teapoy FD - 382 165 Table 3 x 2 (900 x 600 x 760 mm) with drawer 166 Table office officer wooden 167 Schedule A Part-II (Steel Furniture Work) 168 CHARPOY GI PIPE(FD 220, FD 220 (R)) 169 Removing of broken long rails of GI pipe charpoy and supply and fixing new long rail of GI tubing 32m dia medium grade duly threaded complete all as specified and directed. 170 Conversion of long rails into short rail, duly threaded and fixing to charpoy after removing broken short rails complete all as specified and directed by Engineer-in-Charge. 171 Conversion of shortrails into legs, duly threaded and fixing to charpoy after removing broken short rails, complete all as specified and directed BY Engineer-in-Charge. 172 Replacement of damaged and unserviceable GI elbows with new 3 way 32mm medium grade , ISI marked complete all as specified and directed by Engr-in-charge. 173 Replacement of damaged and unservicable check nuts with new check nuts 32 x 10mm and fixing on long rail complete all as specified and directed. 174 Removing plywood top from charpoy GI and replacing with new plywood commerical type12mm thick, 6 ply, fixed with counter sunk nut and bolts with steel washers and replacing damaged nut and bolts and MS flat stiffneneras required of 40 mm x 6 mm , complete all as specified and directed by the Engineer-in-Charge. 175 Conversion of charpoy GI nylon newar into charpoy GI with plywood top with 12mm commercial plywood 6 ply, 02 No of Stiffener of MS plate 900mmx 40mm x 5mm thick shall be provided and welded long rail to long rail of charpoy GI pipe duly painted with black sy-enameled paint after a coat of red oxide, plywood shall be fixed with counter sunk nut & bolt of 60mm x 6mm with washers and fixed to plywood top complete all as specified and directed by Engineer-in-Charge. 176 Bed hard tubler steel with plytop / Bed Hard MAP 177 Replacement of unserviceable head board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawingcomplete all as specified and directed by Engineer-in-Charge. 178 Replacement of unserviceable foot board made out of PPB 18mm thick one side teak face laminated and one side white laminated rest all as per drawingcomplete all as specified and directed by Engineer-in-Charge. 179 Replacement old dmaged / wornout hard top made out of plywood top 12 mm thick Commercial 6 ply, complete all as specified and directed by Engineer-in-Charge. 180 Charpoy IP tubler steel with hard top 181 Replacement of Commercial plywood top 12 mm thick 6 ply complete all as specified and directed by Engineer-in-Charge. 182 CHAIR TUBULAR STEEL WITH ARMS (FD-75(M)) 183 S&F in Replacement of unserviceable seat of hard-wood duly canned with 2mm wide half round plastic cane in godrej pattern and black polished complete all as specified and directed by Engineer-in-Charge. 184 S&F in Replacement of unserviceable back of hard-wood duly canned with 2mm wide half round plastic cane in godrej pattern and black polished complete all as specified and directed by Engineer-in-Charge. 185 S&F in Replacement of unserviceable arms of hardwood duly black polished complete all as specified and directed by Engineer-in-Charge. 186 S&F of MS plate 25x490x3mm including welding to front and rear steel frame duly painted with Olive Green paint over a coat of primer of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. 187 Painting of complete chair frame with Olive Green synthetic enameled paint over a coat of primer of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. 188 Hard rubber/PVC shoes to be provided to the chair CB steel with arms complete all as specified and directed by Engineer-in-Charge. 189 Hard rubber Caps to be provided to the chair CB steel with arms complete all as specified and directed by Engineer-in-Charge. 190 CHAIR VERANDHA (FD-256) 191 Preparation of surfaces of chair verandah, removing of rust/dust with emery paper and painting with synthetic enamelled white paint of make Asian Apcolite/Berger/Nerolac complete all as specified and directed by Engineer-in-Charge. 192 Welding to joints of Chair verandah,complete all as specified and directed by Engineer-in-Charge. 193 Re-canning of chair verandah with 4 mm wide half round plastic cane white colour premium brand, canning shall be done complete all as specified and directed by the Engineer-in-Charge. 194 Hard rubber/PVC shoes shall be provided to the chair verandah complete all as specified and directed by Engineer-in-Charge. 195 S&F PVC seats and backs to the Chair varandhaafter removing old damaged worn outPVC seats and back. 196 CHAIR CONFERENCE WITHCUSHIONED SEAT & BACK (Special) 197 S&F in Replacement of cloth leatherite/ Tapestry of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs ,complete all as specified and directed by the Engineer-in-charge. 198 CHAIR CUSHIONED SEAT & BACK (Special) / (TP) 199 S&F in Replacement ofleatherite cloth of colour and pattern as approved , material for upholstering like foam cushion, 28 density and other required materials shall be of best quality, PVC shoes for legs of the chairs, complete all as specified and directedby the Engineer-in-charge. 200 Chair school / chair examination / chair /TP FD/E6 MAP 201 S&F new seats PVC (blowplast/supreme/amco or equivlant) after removing old damaged seats fixing shall be done with approprate size screws and washers.Colour and pattern as approved by the engr in charge. 202 S&F new hand rest on the chair examination / chair school / chair with hand rest made out of 18 mm thick plank of Teakwood well seasoned and attached with pyno hingis shape and size as mentioned in drg. 203 Painting to the steel structure of the chair in two coats of best quality paint with best worksmanship. 204 Repair to Chair Revolving Executive / Chair revolving long back 205 Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge. 206 Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr 207 Taking out Unserviceable base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed. 208 Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair 209 Replacement in Repair of padestal assembly as per sample available in BS Yard 210 S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional. 211 S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional. 212 ALMIRAH LARGE STEELFD-67(M), FD-103, FD114(M), FD-104(M) FD-350Removing unserviceable part of Almirah large steel, Almirah 1/2 H 1/2 S, etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-Charge. 213 Leg made out 1.00 mm thick MS Sheet 214 Shelves made out of 1.00 thick MS Sheet a clip 215 Complete Locking device with adjustable rods and locking machanisim and lock 216 Door made out of 1.00 mm thick MS Sheet 217 ALMIRAH MED STEEL FD-67(M), FD-103, FD114(M), FD-104(M)Removing unserviceable part of Almirah medium steel, Etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-charge. 218 Leg made out 1.00 mm thick MS Sheet 219 Shelves made out of 1.00 thick MS Sheet 220 Complete 3 Way Locking device with adjustable rods and locking machanisim and lock 221 Door made out of 1.00 mm thick MS Sheet 222 LOCKER BED SIDE STEELFD-1029Removing unserviceable part of locker bed side steel etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. 223 Leg mae out 1.00 mm thick MS Sheet 224 Hasp & Staple MS CP 225 Door made out of 1.00 mm thick MS Sheet 226 MS CP Handle FOR ALMIRAH ALL TYPE: ( FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)) 227 S&Fin repairs Chromium plated handle for Almirah any type.Fixing shall be done properly with washirs and bolts with worksmanship. 228 LOCK FOR ALMIRAH ALL TYPE: (FD-67(M), 83(M), FD-1032,FD-114(M),FD-104(M), FD-350(M)) 229 S&Fin repairssteel lock with duplicate key (4 Liver). Make Godrej/Harison for almirah any type . Fixing shall be done properly with scres and key hole covers outside to the lock on the door leaf with worksmanship. 230 TABLE OFFICE CLK STEEL FD-84(M), FD-1004 :- Removing unserviceable part of Table office clerk steel, table typist steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer - in- charge 231 Complete Drawer boxwith acessories as per Drg made out of 1.00 mm thick MS Sheet 232 Locke 4 liver of drawer with duplicate Key 233 TABLE OFFICE OFFICERS STEEL FD-84(M), FD-1003Removing unserviceable part of table officer steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. 234 complete Drawer boxwith acessories as per Drg made out of 1.00 mm thick MS Sheet 235 Lock 4 liver of drawer with duplicate Key 236 TABLE 3X2 WITH DRAWER (Steel)FD 1008 etc 237 complete Drawer box for table 3x2with acessories as per Drg made out of 1.00 mm thick MS Sheet 238 Locke 4 liver of drawer with duplicate Key 239 MS TUBE 25mm for repairs FD-84(M), FD-1004 /1003, FD-165, FD-1007/1008, FD-1018 240 S&Fin repairs MS Tube 25 mm Square, 16 Gauge welded to existing frame duly painted paint OG / Black/ silver/ white as required and as directed to match with the existing surfaces all as directed. 241 Repair to chair computer / ChairRevolving /Chair Padded/and all kind of TP revolving chairs 242 Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge. 243 Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer / chair revolving or chair revolving (TP) any pattern with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice Note : Min price range for cloth is Rs 200/- per mtr 244 Taking out Unserviceable base for chair revolving (any given pattern) and S&F new base complete in all respects with caster wheels as pe requirement and duly functional, all as specified and directed. 245 Removing of Unserviceable hand rest and S & F new hand rest of best quality as approved and required to make functional the chair 246 Replacement in Repair of padestal assembly as per required shape and size to make functional the chair 247 S&F the PVC caster wheels pin type to the base of the chair revolving to make the chair and base proper functional. 248 S&F the PVC caster wheels Screw type to the base of the chair revolving to make the chair and base proper functional. 249 Replacement of cushion cover of seat and back made out of tapastery cloth / cloth letheritic as approved to make functional the cushion of the chair. 250 Welding works to the steel furniture 251 Gas welding on the conduit and soft sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints. 252 Electric / Rod welding on the sheet surfaces with proper worksmanship, the welding shall be done in running hand welding joints. 253 Multipurpose Chair Cinema (TP) 254 Removing old damaged seats and back of the chair cinema and repairing and fixing the seats and back after replacing foam cushions of both seat and back and provideing foam cushion in shape,cloth leathertic (pattern and colour as approved)repairing the structure of the chair and making functional the forward / backward and sliding motion of the chair in smooth and noiseless. 255 SS SLIDING CHANNELS 256 S&F SS Sliding Channels to the wooden / steel furniture where ever required for Drawers, keyboars, mouse boards etc in repairs with approprate size screws to make functional the furniture articles. 257 PAINTING TO FURNITURE ARTICLES:- Painting to the steel furniture after prepration of surfaces, cleaning the durt, dust, rust with amery papers, removing dents if any, applying suitable putty and smoothing the surfaces, applying a coat of redoxide on fresh surfaces and painting the steel furniture internally and externally with existing colour scheme of OG/Black/White /Smoke grey paint manually makeAsian/Nerolac/Berger of 1st quality paint. The painting will be done as directed by Engr –in charge at site (site of work includes the placeswhere furniture items are issued and in use at different locations of Wing) 258 Almirah large steel 1/2 H 1/2 SH 259 Almirah large steel with shelves 260 Almirah medium steel with shelves 261 Book case steel FD - 1029 / book case lib 262 Locker bed side wooden FD - 54 263 Locker steel FD - 1029 264 Rack side 3/4 spaces steel FD - 1023 265 Rack six tiers steel FD - 1038 266 Rack record steel 6 x 2.5 x 6 wooden / steel 267 Table office clerk steel FD - 1004 268 Table office officers steel FD - 1003 269 Table typist steel 270 Table dining for ORs 271 Trestle store room steel 272 Table steel 900 x 600 x 760 mm FD - 1009 273 Deduction to be made from BOQ for Schedule A Part-III (Credit Schedule from dismantling / taking down items) worth Rs 2,35,350.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
