Tender For Addition / Alteration To Certain Smq’S Under Ge (Af) Srinagar.; 1 Schedule A Part-I (B/R Work) 2 Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. 3 M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed. 4 M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately). 5 M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. 6 Supply only integral water proofing compound, complete all as specified and directed. 7 Preparation of new plastered surfaces on ceiling and applying two coats of white wash, complete all as specified and directed. 8 Preparation of new plastered surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed. 9 Complete removal of existing treatment of walls and applying 1mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion paint, complete all as specified and directed. 10 Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatment including thin layer of wall care putty and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer, complete all as specified and directed. 11 Preparation of new plastered surfaces of walls andapplying two coats of anti-fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty, complete all as specified and directed. 12 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 13 Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 14 S&F pressed steel frame for doors with one rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. 15 S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc. including PCC, 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and directed. 16 M&L for plain cement concrete, 1:2:4, Type B-1 (20mm graded crushed stone aggregate) as in hold fast blocks rungs etc. including necessary formwork, complete all as specified and directed. 17 Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n exc 10cm girth. complete all as specified and directed. 18 Dismantling of timber scantlings 40 sqcm and over in section, in any position unframed work, complete all as specified and directed. 19 M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints complete all as specified and directed. 20 M&L for second class hardwood in scantlings frame work, wrought, complete all as specified and directed. 21 S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. 22 S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. 23 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. 24 S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 25 S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. 26 S&F 100mm size Aluminium handles, cast type, anodised, complete all as specified and directed. 27 S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 28 S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. 29 S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. 30 S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. 31 S&F in repairs 250mm mild steel helical door spring rat tail type including collar plate and welding if required or otherwise fixed with screw on wooden frames, complete all as specified and directed. 32 S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed. 33 Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 34 M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new wooden works with two or more coats, complete all as specified and directed. 35 M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old wooden works with one or more coats, complete all as specified and directed. 36 M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old wooden works with one or more coats, complete all as specified and directed. 37 S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. 38 S&F in repairs aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply andfixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. 39 S&F for powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed. 40 S&F in repairs aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick plain glass making frame and glass water tightening making it good etc., complete all as specified and directed. 41 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed. 42 S&F Anodised aluminium snap grid frame work for false ceiling including Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specifiedcomplete all as specified and directed 43 S&F 6mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / aluminium framework with screwsincluding putty to receive finishes, complete all as specified and directed. 44 Preparation of new or previously untreated plaster/ AC sheet / Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour / tint, complete all as specified and directed. 45 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. 46 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 47 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 48 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 49 M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. 50 M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. 51 Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. 52 M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. 53 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. 54 M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. 55 S&F 18-19mm thick block board, grade-2 quality, interior grade, commercial type, fixed with screws to timber framework as in kitchen drawers, cupboard shutters etc. complete all as specified and directed. 56 S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed. 57 S&F 100mm stainless steel, fancy type, round D drawer cabinet handles, including all fitting, complete all as specified and directed. 58 S&F 60mm size stainless steel hinge, self closing, Italian pattern suitable for wooden cabinet door opening / closing operation, complete all as specified and directed. 59 M&L for 3/4mm thick PVC edge lipping fixed with nails for 18/19 mm thick prelaminated particle board & shuttersetc., complete all as specified and directed. 60 S&F ofMagnet of suitable size fixed for cabin leafs, drawers etc., complete all as specified and directed. 61 S&F stainless steel telescopic channels roller of size25mm x 12mm,450mm length (when close) with male female rolling brackets suitable for baskets, complete all as specified and directed. 62 S&FStainless steel 304 grade perforated cutlery basket of size 520mm width, 485mm depth and 100mm height, completeall as specified and directed. 63 S&FStainless steel 304 grade Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed. 64 S&F Stainless steel 304 grade designer Pull out detergent basket of size 100mm width, 485mm depth and 430mm height, complete all as specified and directed. 65 S&F Stainless steel 304 grade designer pull out basket of size 810mm width, 485mm depth and 200mm height, complete all as specified and directed. 66 Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed. 67 M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. 68 M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. 69 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. 70 M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. 71 M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. 72 Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed. 73 M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble ), complete all as specified and directed. 74 M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. 75 M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed. 76 M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed. 77 M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. 78 M&L for machine pressed glossy finished 25mm thick coloured cement concrete chequered tiles of size 300mm x 300mm of pattern as approved, set, jointed and pointed in neat slurry in floors over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed. 79 S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball PTMT valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed. 80 S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. 81 S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 900mm x 975mm including fixing to wall and all accessories, complete all as specified and directed. 82 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. 83 Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. 84 S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. 85 S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. 86 Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. 87 Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. 88 M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed. 89 S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. 90 S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. 91 S&F in repairs vitreous china wash basin white flat back,size550x400 mm, with & including 32mm dia PVCwaste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed. 92 S&F in repairs 125mm dia CP grating doom with waste hole, complete all as specified and directed. 93 S&F in repairs 100mm / 75mm stainless steel grating, complete all as specified and directed . 94 S&F in repairs 15mm bore telephonic wall mixture with hand shower( telephonic type), chromium plated with 900mm long chrome finish flexible pipe 15mm bore, complete all as specified and directed. 95 S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed. 96 S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. 97 S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 98 S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. 99 S&F in repairs 15mm bore stop cock/angle cock, two way, fancy type,with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end, complete all as specified and directed. 100 S&F in repairs 15mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 101 S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 102 S&F towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality, complete all as specified and directed. 103 S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. 104 S&F 6mm thick glass corner shelves, fancy type, 225x225mm size, complete all asspecified and directed. 105 S&F in repairs stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed. 106 S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed. 107 S&F inrepairs 50mm dia PVC pipe low density (LDPE) of pressure 6kg/sqcm fixed to wall or laid in floor as waste pipe, complete all as specified and directed. 108 S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed. 109 S&F in repairs 600mm long towel rail of PTMT fixed with and including chromium plated brass screw and wooden / plastic cleats(minimum weight 190gms), complete all as specified and directed. 110 S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed 111 Dismantling of PVC drain pipes, 75/100 mm dia including all fitting, jointed with rubber ring and taking out from trenches / walls, complete all as specified and directed. 112 S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed . 113 S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed . 114 S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed. 115 S&F 110mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified. 116 S&F 75mm size PVC (SWR) bends of any radius fitted with oval access doors, complete all as specified and directed. 117 S&F PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed. 118 S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. 119 S&F 110mm bore PVC (SWR)junction single, (Double T) equal or unequal, complete all as specified and directed. 120 S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. 121 S&F 75mm bore PVC (SWR)junction single, (Double T) equal or unequal, complete all as specified and directed. 122 M&L for cleaning surface of sunken portion wall / bottom and applying cement slurry @1.2 Kg per Sqm and applying 15mm thick cement plastred in CM 1:3 finished even and fair using extra cement and applying two coats of acrylic polymer modified cementious slurry as per manufactureas instruction to make the surface leak proof, complete all as specified and directed. 123 M&L for plain cement concrete, 1:5:10, Type E-2 (using 40mm graded crushed stone aggregate) as filling in Sunken portion, complete all as specified and directed. 124 S&F 40mm bore mild steel galvanised iron tubing, medium grade, cut to size and fixed as spout pipe in sunken floor of toilet, complete all as specified and directed. 125 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. 126 M&L for brick work with sub-class `B bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. 127 M&L for plain cement concrete, 1:3:6, Type C-1 (using 20mm graded crushed stone aggregate) as in surface channel, coping, drain and RCC post etc. including necessary form work, complete all as specified and as directed. 128 M&L for DWCPE (SN8) 180 (OD) /163(ID) mm diameter pipe laid on150 mm thick bed including excavation in any type of soil, manholes / drop manhole of standard size made of Brick masonry / RCC/ Precast RCC with SFRC ventilating cover and frame. (Includes all items and activities to execute and make sewer line functional) and layed over and including 150mm thick bedding 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) and depth 0.70m to 1.65 m average, complete all as specified and directed. 129 M&L for LLDPE septic tank for 25 users with UPFLOW FILTER INLCUDING MEDIA, designed to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8type D-2 (using 40mm graded crushed stone aggregate) below foundation, Vent shaft, connection etc., complete all as specified and directed. 130 M&L for Soakage well in soft / loose soil, size 1.80m dia and 4.00m depth (25 users), PCC 1:3:6 in foundation, 150 mm thick, wells of Honey combed brick work with CM 1:4 with using sub class ‘B’ old size brick, PCC bend using 1:2:4 concrete at every 1.00m Height, 115mm thickness of brick work should be increased at every 0.75m depth and filling brick bats in the wall upto 2.00m height and provide 100mm thick RCC slab of M-25 grade concrete including intercepting / Screen chamber, complete all as specified in TD-CE/AF/STD-15/2000 Sheet No 1/2 and 2/2 dated 05 Jan 2000, complete all as specified and directed. 131 Schedule A Part-II (E/M Works) 132 Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point includingfixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made asper conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surfaceand finishing the surfaces as per existing,complete all as specified and directed. 133 M&L for Point wiring for light / fan point controlled by one way switch 6 Amps 240 volts with 1.5 sqmmcopper conductor FRLSH(multistrand) PVC insulatedISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) 134 All as per Ser item No 131.00 here in above but light / fan point controlled by two way switch 6 amps 240 volts 135 All as per Ser item No 131.00 here in above but bell point controlled by one bell push switch 6 amps 240 volts 136 All as per Ser item No 131.00 here in above but 3 pin 6 Amps switch socket outlet point on independent Board. 137 All as per Ser item No 131.00 here in above but 3 pin 6 Amps switch socket outlet point on same board. 138 M&L for Point wiring with 2.5 sqmmcopper conductor FRLSH(multistrand) PVC insulatedISI marked unsheathed copper wire 1100 volt grade in and including concealed / surface, non metalic rigid PVC medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unsheathed FRLSH copper wire cable 1100 volts grade of size 2.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling,modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulatoretc for the following :- Note - Colour code of cable Phase-Red, Neutral- Black and Earth -Green) 139 S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified anddirected. 140 S&F Modular switch 2 way, 6 Amp, 230 volts ,1 Module, complete all as specified anddirected. 141 S&F modular Socket6 Amp, 230 volts,5 Pin universal, 2 Module, complete all as specified and directed. 142 S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed. 143 S&F Modular socket 6/16 Amp (euro socket), 250 volts, 2 Module, complete all as specified and directed. 144 S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed. 145 S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. 146 S&Fbell electric AC,230V, single phase ,ding dong type, complete all as specified and directed 147 S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed. 148 S&Flamp holder suitable for pin type LED 10 watt includinglamp etc., complete as specified and directed. 149 S&F decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC including LED tube 20 watt, complete all as specified and directed. 150 S&F energy saving new generation 10 watt LED IP 65 bulkhead luminaire with opal diffuser with 10 watt LED lamp etc., complete as specified and directed. 151 S&F in repairs 35 watt LED building secuirity light, IP-66 high power with pressure die cast aluminium housing complete with all accessories including 3 core flexible cable from ceiling rose to connector of fitting etc., complete as specified and directed. 152 S&F 10 watt LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistrand PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit, complete all as specified and directed. 153 Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make /type /size (horizontal / vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair / replacement of defective /worn-out / unserviceable components / parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering/brazing of the inner copper tank and replacement of defectiveworn out unserviceable components/parts andpainting of geyser 50 ltrs after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) and re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge 154 including the replacement of the following items etc., complete all as specified & directed.(a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS.-01 Nos(b) Supply only Flexible chromium plated connection pipe size 450 mm long 15 mm bore with brass chromium plates coupling suitable for geyser any capacity-01 Nos 155 Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts inits original location and hanging connecting and testing ceiling fan for smooth functioning including replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & markingMES No. with black paint, complete all as specified and directed. 156 S&F 25 Litre capacity electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2KW, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV,connection piece etc., complete all as specified and directed. 157 S&F in repairs 300mm sweep heavy duty exhuast fan, 900 RPM turbo force model single phase including all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc., complete as specified and directed. 158 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep, minimum air delievery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed. 159 S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door) 8 way single pole & neutral suitable for MCB DBs 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified and directed. 160 S&F epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made, (double door)4 way VTPN suitable for MCCB DBs 415 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting, complete all as specified anddirected 161 S&F MCB of single poles and current carrying capacity 6 to 32 Amp,240V, 10 KA C curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. 162 S&F MCBsingle pole and neutral ISI marked `C seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed. 163 S&F 100 Amps MCCB, 3 pole 16 KA working on 415 Volts 50 HZ AC supply, complete all as specified and directed. 164 Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. 165 Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. 166 M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4)type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh,and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed. Note: (i) The unit rate includesmain earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. 167 Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 16 Sqmm 4 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitablethe cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc. including taking out unserviceable cable, complete all as speccified and directed. 168 Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed 169 Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed. 170 Removing excavated material to a distance n.exc 50 m & depositing where directedat a level n. exc 1.50 m above the starting point complete as specified and directed. 171 M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed. 172 M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed 173 S&F 40mm dia galvanised steel tube, light grade, for protection of copper strip / cable at wall and duct / road / trench, complete all as specified and directed. 174 Supply, installation, testing & commissioning, LT panel cubical type of size 0.9 x 0.6 x 0.6 Metre,CPRI Approved, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, outdoor type, factory fabricated, duly powder coated inside and out side, outer cover made out of 3.15 mm thick CRCA sheet, internal cover and partition made out of 2mm thick CRCA sheet with angle iron 40mm x 40mm x 6mm and 0.5m long covered from all side with front and back openable, dust, vermin and weather proof including suitable rating Copper bus bar for 3 phase 4 wire system, wiring with suitable size coppercable and embedded in brickwork with nuts, bolts and washer etc., complete comprising of following including taking out the old unserviceable panel, complete all as specified and directed. Incoming:- (a) MCCB 4 pole,100 Amp, 35 KA, 415 volts AC with adjustable thermal and adjustable magnetic setting- 01 No. (b) Copper bus bar 200 Amp TPN - 04 Nos(c) Digital voltmeter 0-500 volts with selector switch -01 No(d) Digital Amp meter0-200 Amp with selector switch & CT - 01 No(e) Indicator lamp LED type (R, Y, B) complete with Bakelite fuse fitting - 01 SetOutgoing:- (a) MCCB 4 pole, 63 Amp, 16 KA, 415 volts AC- 02 Nos. 175 Note: LT panel board shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level and 30 cm below ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 176 Deduction to be made from BOQ for Schedule A Part-III (Credit Schedule from dismantling / taking down items) worth Rs 1,39,130.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)
