Tender For Welcome Maint Work In Officers Md Accn At Dronachal; 1 M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling completeall as specified and directed by Engr-in-charge. 2 Mateirial & labour for Preparation of old decorated surfaces on walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls completeall as specified and directed by Engr-in-charge. 3 M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by applying white cement base putty in patches as required andone coat of oil bound distemper all as specified and directed by Engr-in-charge. 4 M&L for complete removal of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails and applyingtwo coat of oil bound distemperover& inculdinga coat of white cement base puttycompeletall as specified and directed by Engr-in-charge. 5 M & L for preparation of old decorated surface of wall including brooming scrapping down, smoke spot, mass efflorescent, treding oil, greasy spots and stopping nail marks by applying white cement based putty in patches as required and applying two coats of exterior weatherproof water base emulsion painton wall all as specified and as directed by Engr-in-charge and as approved by GE 6 M&L for Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified by Engr-in-charge. 7 All as per item No.6 above but on steel surfaces. 8 M& L for one coat of wooden polish (French Polish) over old wooden decorated surface complete including preparation of old surface complete all asspecified and directed by Engr-in-charge. 9 Taking down chowkhats or frameswith shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site completely. 10 Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete. 11 Taking down shutters of any description, area exceeding 2 sqmeach complete. 12 Supply and fixing 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete. 13 Supply and fixing35 mm thickFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. 14 Supply and fixing solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed by Engr-in-charge. 15 Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined togetherwith solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed by Engr-in-charge. 16 Supply and fixingButt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed by Engr-in-charge. 17 Supply and fixingaluminium handles extruded type of size 125mm, complete all as specified and directed by Engr-in-charge. 18 Supply and fixing150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed by Engr-in-charge. 19 Supply and fixing250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and directed by Engr-in-charge 20 Supply and fixinggalvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge . 21 Supply and fixingin repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows completeall as specified and directed. 22 Material and labourfor Securing glass of any description in existing Metal/wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed. 23 Supply and fixing3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane as incl removing of existing glassif requiredcomplete all as specified and directed. 24 Supply and fixingfor figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as incl removing of existing glass if required complete all as specified and directed. 25 Supply and fixing 4.8mm thick glass pan area exc 0.50 Sqm in each pan with rubber / neoprene bedding galzing clips including taking out old glass if required and necessary fittings complete all as specified and directed by Engr-in-charge. 26 Supply and fixingin repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller platecomplete all as directed. 27 Fixing with running welding in repair of MS hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed. 28 Fixing with running welding in repair of Steel Windows, by Welding or by Bolts of adequate strength, Cutting of Windows whereever required for AC Duct Opening Etc, Inclding Weldin if Required on Window Ventilator Etc, Including all the necessary Accessories for Window Fixing, Window and Ventilator of any type, Any Size and thickness, complete all as specified and as directed. 29 Supply and fixingin repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed allas specified and directed. 30 Supply and fixingin repair 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. 31 Supply and fixingin repair 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. 32 Supply and fixingin repair aluminium handles 150 mm size, cast type, anodisedcompleteall as specified and directed. 33 Supply and fixing in repair140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed. 34 Material and labour for Painting to new wood or wood basedsurfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge. 35 Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxideprimer, complete all as specified and directed. 36 Supply and fixingin repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed 37 Extra over rate for item No 36 above for prelaminated partical board for external teak wood lipping 6mm thick fixed with nails complete all as specified and directed by Engr-in-charge. 38 Material & labourin repairfor 2nd class hard wood plain fillets, square, rectangularin section,making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails 39 Supply & fixing in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm 40 Supply and fixingin repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished 41 Supply and fixingin repair ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutterwith necessary cutting and fixing complete. 42 Supply and fixingin repair for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw as per specified. 43 Supply and fixing 100 mm butthinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI marked hinge pin, anodised and fixed with wooden screws complete as specified and directed. 44 S&F in reapirfor 20mm dia SS curtain rod decorative type incl brackets complete all as specified and directed. 45 Supply and fixingin repair light coloured vitreous china wash hand basin white available shape as approvedof500mmx400mm (minimun)on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified . 46 Supply and fixingin repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete all as specified and directed by Engr-in-charge. 47 Supply and fixingin repair Vitreous Chinawash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete all as specified and directed by Engr-in-charge. 48 Supply and fixingin repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete all as specified and directed by Engr-in-charge. 49 Supply and fixingin repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity complete all as specified and directed by Engr-in-charge. 50 Supply and Fix in Repair PVC Flush Tank by providing Flush Kit, Washers, PVC Connections, Rubber Kit and other related accessories including making good the damage to the nearby Walls etc damaged during repair all as specified and as directed by Engineer-in-Charge 51 Supply and fixingin repair of fancy typepillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type. 52 Supply and fixing in repairs offancy type chromium plated Bib tap long body, 15mm bore any make as given in list of makes as directed by the GE. 53 Supply and fixingin repairof CP brassfancy typestop cock with long shank& as concealed type/ angular type complete all as specified and directed. 54 Supply and fix in repair PVC connection 15 mm size, of length 450 mm, with PTMT nutscomplete. 55 Supply and fixing in repairPVC Flexible waste pipe 32/40 mm dia with socket for steel sink/Washbasinupto floor level and length not less than 0.60 M complete all as specified and directed. 56 Supply and fixing in repairglass shelf made out of 5mm thick 600mm long x 150mmglass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. Make:- Jaquar(Continental) or equivalent 57 Supply and fixing in repaircorner glass self made out of 5mm thick 225mm x 225mm size glass piece round edged, SS railing fixed to wall with 2 nos heavy duty SS bracket. 58 supply and fixing in repair cp paper holder for Ewc all as specified and directed 59 Supply and fixing in repair ofaluminiumhat pegs, solid body, 125mm to 175 mm sets of 3 Nos peg set complete all as specified and directed. 60 Supply and fixingin repair aluminiumhat pegs, solid body 175mm to 250 mm , pegsets of 6 Nos peg set of good quality complete all as specified and directed 61 Supply and fixingin repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleevewith 32mm outlet and checkof any dia as per site requirement complete all as specified and directed. 62 Supply and fixingin repair CPVC pipe 15mm dia of grade SDR-11 (class-I)including all CPVC and brass fittings fixedto walls, floors, or ceiling or laid in floors etc complete. 63 Supply and fixingin repair CPVC pipe 20mm dia of grade SDR-11 (class-I) ISI markedincluding all CPVC and brass fittings fixedto walls, floors, or ceiling or laid in floors etc complete. 64 S&F in repair Health faucet CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed. 65 S&F Tubular towel rail aluminium anodised 20 mm diaD-type 60 cm long between flanges, including brackets and fixed to walls, complete. 66 S&F in repair two way bib tap 15mm dia complete all as specified and as directed by Engineer-inCharge 67 S&F in repair chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted. 68 Supply and fixingin repair of fancy type three handle wall mixer, chromium plated with or without lettered Hot or Cold with a single unit fitted on wall and fixing for pipe of 15mm bore make as given in list of makes as directed by Engineer-in-charge 69 Supply and Fixing in Repair by disconnecting and Refixing the Bib Taps, Pillar Taps, Two Way Taps, Stop and Angle Cock by replacing Spindle and other accessories including making good the damage to other linked Items of Tiles, PCC Etc complete all as specified and as Directed By Engineer-In Charge. 70 Supply and fixing in repair of PVC Mirror cabinet, size 330 X 430mm single door with mirror colour white complete all as specified and directed. make as given in list of makes as directed by Engineer-in-charge 71 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete. 72 Material and labourfor 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed. 73 Material and labour25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete. 74 Demolition of stone slab and tilingof any description or thickness laid, bedded and pointed in any mortar 75 Material & labour for 20mm thick granite (of any type) work (tablerubbed and polished)in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed 76 Material and labourforrounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete as directed. 77 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete. 78 Material and labourfor glazed ceramic tilescolouredof size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to matchthe colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. 79 Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade oftiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. 80 Cleaning and removing all scale and dirt etc from over head water tanks and from mouths of circulating pipe etc including dismantling & refixing at same or other place completeall as specified and directed by E-in Charge for following capacity including writing with oil paint the date of cleaning of tank :- 81 (a) Exc 250 Ltrsbut not exc 500 Ltrs 82 (b) Exc 500 Ltrsbut not exc 1000 Ltrs 83 Supply and fixing Rotational moulded polyethylene water storage tanks of 750 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc & and 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete. 84 Supply and fixing rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etcand 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball including taking down existing tank complete . 85 Supply and fixing 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15mm/20mm (using reducer) and fixed 86 Material and labourfor sunken floor treatment as follows:- 87 (i) Demolition of cement concrete in sunken floors incl. removing dubrish outside MD land complete all as specified and directed. 88 (ii) Brushing neat cement slurry with 3.0kg of cement per sq. metre mixed with WPC @ 3% by weight of cementas per manufacturers instructionto fill all hole and crack complete all as specified and as directed. Note:- Water tightness testing should be done after 24 hours 89 (iii) Material and labourforPCC (1:2:3) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout and all pipe fixing.Note : Water proofing compound will be measuredand paid separately. 90 (iv)Material and labourfor plastering on vertical sides and top surface ofCM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC& plaster be carried out at the same time. Note : Water proofing compound will be measuredand paid separately. 91 (v) Material and labourfor 2 coats of Dr. Fixit krystalline waterproofing coating compound shall be applied after laying sewage/ plumbing pipes with fixtures in position. 92 (vi)Material and labourfor filling the sunken floor with PCC( 1:5:10) type E-2 using bk aggregate over the treated surface. 93 (vii) Material and labourspouts of50mm dia GI pipe light grade projecting 450mm clear of face outer wall with PVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water , if any. 94 Note : Water tightness testing should be done after applying Dr Fixit epoxy compound, by pounding water for 72 hours & rectify defects if any till total elimination of defect. Dubrish to be removed outside MD land. 95 Taking down cement plaster of any description including raking outjoints, hackisng for key, scrubbing down with water etc. 96 Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfacesfinishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete. 97 -Ditto- all as per Srl item No.86here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound including Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. Note:-Supply only of WPC shall be measured and paid separately. 98 Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete. 99 supply only integral water proofing compound 100 Material and labour for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cementsand mortar 1:6 including demolition & removing dubrish outside MD landcomplete all as specified and as directed .
