Tender For Certain Repairs To Joinery, Aluminium Partitioning And Other Allied Works In Zone-Ii, Iii, Iv, V, Vi, Vii, Viii And Rtrs At Tbrl Range Ramgarh; 1 Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sqm each complete all as specified and directed. 2 All as per serial item no 1 above but exc. 1.5 sqm and n.exc.4 sqm each -ditto-. 3 Taking down shutters of any description n.exc. 1 sqm each complete all as specified and directed. 4 All as per serial item no 3 above but exc. 1 sqm and n.exc 2 sqm each -ditto-. 5 Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1 as required exc one brick but not exc two bricks complete all as specified and directed. 6 Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. 7 Supply and fixing factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed. 8 Refixing shutters of any description n exc 1 sqm each in same opening -ditto- 9 Refixing shutters of any description exc 1 sqm but n exc 2 sqm each in same opening complete all as specified and directed. 10 Supply and fixing for factory made ERW section window box type ( P Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazed or gauzed) complete all as specified and directed. 11 Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. 12 Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed. 13 Supply and fixing for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed 14 Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed. 15 Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. 16 Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel chowkats, bed plates, hold fast, lacing course coping, bed blocks complete all as specified and directed. 17 Supply and fixing for 35mm thick 1st class softwood (Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and metered beads for securing glass etc, size of members complete all as specified and directed. 18 Supply and fixing for 35mm thick 1st class softwood (Hollock) factory made framed, panelled shutter (three panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I),timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed. 19 Supply and fixing for 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed 20 Supply and fixing for MS barrel tower bolt stove enamelled black with bright bolt 200mm long complete all as specified and directed. 21 Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed. 22 Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed. 23 Supply and fixing for M S butt hinges 100 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed 24 Supply and fixing for 4 mm thick Sheet glass, selected quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size quality or description) from wooden complete all as specified and directed. 25 Material and labour for preparation of new or previously untreated surfaces of wood of any description and two coats of synthetic enamel paint over a coat of pink primer, not otherwise described, over 10cm width or girth complete all as specified and directed. 26 Supply and fixing in repair MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed. 27 Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed. 28 Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. 29 All as per serial item no 28 above but fixed in repair -ditto-. 30 Dismantling structural steel work incl doors, gates but excluding framed, trusses etc complete all as specified and directed. 31 Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fastening and fixing complete fixed in repair complete all as specified and directed. 32 Material and labour for preparation of new steel surfaces of any description two coats of synthetic enamel paint over a coat of red oxide primer on steel Surfaces of any description, over 10cm in width or girth, not otherwise described including complete all as specified and directed. 33 Material and labour for preparation of new steel surface of any description two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces, n.exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. 34 Supply and fixing for 30mm thick flush shutters, solid core construction, with block board care and both faces covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. 35 Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed. 36 Supply and fixing for 4.80mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed 37 Supply and fixing for 5.50mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed 38 Supply and fixing for rough cast, wired figured glass, 6.4mm thick and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed 39 All as per serial item no 38 above but exc 0.5 sqm but n exc 0.75 sqm in each pane -ditto- 40 All as per serial item no 39 above but exc 0.75 sqm but n exc 1.00 sqm in each pane -ditto- 41 Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm complete all as specified and directed. 42 Supply and fixing for 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed. 43 Taking down aluminium door shutters of size exc. 1.00 Sqm but n.exc. 2.00 Sqm, dismantling the door and replacing the MS anchor rods 10mm dia, both sides screwed and tightening inside frame, both side bottled & reassembled the door, fittings all items glass beading, hinges replacing rubber/aluminium beading where defective and fitted in position complete all as specified and directed. 44 Material and labour for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed. 45 Supply and fixing for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, 150mm long tower bolt 2 nos, hinges anodised aluminium snap beading screws etc. complete all as specified and directed 46 Supply and fixing for double action floor spring for aluminium door shutters fixed in repair complete all as specified and directed. 47 Supply and fixing for hydraulic door closer regulated, designation no. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed. 48 Supply and fixing in repair hydraulic door closer regulated, designation no. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed 49 Supply and fixing for 100mm size mortice locks of brass body, 4 levers suitable to aluminium door shutters complete all as specified and directed. 50 Supply and fixing in repair 100mm size mortice locks of brass body, 4 levers suitable to aluminium door shutters complete all as specified and directed. 51 Supply and fixing for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. 52 Supply and fixing in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars top & bottom runners, MS handles, etc as specified, erected in position and securing runners withhold fasts & brackets, complete all as specified and directed. 53 Supply and fixing in repair venetian blinds, sheer demount blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed 54 Supply and fixing in repair venetian blinds, vertical type, complete all as specified and directed. 55 Supply and fixing in repair powder coated aluminium grills, fixed to aluminium windows/partitions/door frame including all fixing arrangements like aluminium channels, screws etc complete all as specified and directed. 56 Supply and fixing for 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy fixed incl in repair complete all as specified and directed. 57 Supply and fixing for rubber beading in aluminium doors and windows fixed in repair complete all as specified and directed 58 Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair complete all as specified and directed 59 Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed. 60 All as per serial item no 59 above but gear type operated by handles --ditto--. 61 Supply and fixing in repair gauge springs for rolling shutters as per existing complete all as specified and directed. 62 Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer.Created in position as indicated for push pull or manhole type fixed as in repair complete all as specified and directed. 63 All as per serial item no 62 above but 1.25mm thick gear operated type with level gear box & crank hands -ditto- 64 Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water. 65 Material and labour for rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed. 66 Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed. 67 Dismantling existing wall/ceiling board, partition any type including wooden framed work/GI frame work of any size & specifications complete all as specified and directed. 68 Supply and fixing for suspended false ceiling system using exposed suspended system, grid system 600mm x 600mm with following specifications: -(i)Pre primed, self embossed, textured designer board, water resistant, termite resistant, fire resistant for insulation HSPC (E-grid) 4mm thick (ii) GI powder coated Main Tee of size 38x24x0.75 mm (min) (ii) GI powder coated Cross Tee of size 24x24x0.75 mm (min)(iii)GI powder coated angle of size 24x24x0.65 mm (min)(iv)Level clip / suspension wire - 4 mm dia GI wire.(v) Soffit cleat/Rawl Plug as per manufacturers instructions(vi) Fixing shall be executed as per manufacturer’s instructions 69 Supply and fixing for 12mm thick gypsum board including two coat of oil bound distemper with Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre tocentre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (n. exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. 70 Supply and fixing for PVC wall lining consisting of 4 to 5mm thick hollow type single side prelam PVC sheet used instead of plain colour sheet fixed to wall with screw incl matching PVC beading. complete all as specified and directed 71 Material and labour for 12mm thick block board grade 2 quality interior grade decorative type with decorative face fixed with timber or aluminium frame work complete all as specified and directed 72 Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc. under 40sqcm. In section unframed work complete all as specified and directed 73 Material and labour for plain fillets square, rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but not exc 25 sqcm in section complete all as specified and directed. 74 Material and labour for 4 mm thick veneered decorative plywood, grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work complete all as specified and directed. 75 Material and labour for 4 mm thick veneered decorative plywood, grade 1 (with decorative face veneers on one faces) on ceiling, fixed with nails to timber frame work complete all as specified and directed . 76 Material and labour for plain fillets square, rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 03 sqcm in section complete all as specified and directed. 77 Material and labour for 18mm thick prelaminated high density high moisture resistances (HDHMR) board any colour / sun mica finished wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour approved by GE)
