Tender For Estimate For Bsnl Tower Connection At Village Rajtala Under Awari D/Cestimate No. & Date :- 20-905-120667-24-00374 Dt. 07-Mar-25, Stc No.:08 Dt. 23.06.2025,O&M No. :-20250617105746 Dt. 17.06.2025,Project No-201657, ashoknagar-Madhya Pradesh

Estimate for BSNL tower connection at village Rajtala under Awari D/cEstimate No. & Date :- 20-905-120667-24-00374 Dt. 07-MAR-25, STC No.:08 Dt. 23.06.2025,O&M No. :-20250617105746 Dt. 17.06.2025,Project No-201657; 1 Provision- 25 KVA DTR- 1 No., 11 kv line-0.14 k.m., 11 kv Tapping DP- 1 No. 2 140 Kg.,8.0 Mtrs. long PCC pole 3 140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] 4 Transportation of 140 kg. 8.0 mtr. Long PCC Pole Including with Material Transportation from Area store Guna/Gwalior/Bhopal to working Site (0 to 50 KM.) (Per No. Per KM) as per RCA GUNA No.6981-82 Dt. 11.03.2024 (65 KM*Rs. 14.4/KM)=936/per Pole *6 No. PCC Pole 5 11 KV D.O. Fuse Unit Polymer type 6 Labour for 11 KV D.O. Fuse Unit Polymer type 7 11 KV Pin Insulator Polymer Composit (5 KN) 8 Labour for 11 KV Pin Insulator Polymer Composit (5 KN) 9 11 KV Strain hardware (T&C type) fittings 10 11 KV(45KN) Composite Polymer Disc Insulators 11 Labour for 11 KV(45KN) Composite Polymer Disc Insulators 12 (Rep-BGP) DTR 25 KVA 11/.04 KV BIS Certified LEVEL-II 13 9 KV Gapless type(5 KA) polymer lightening arrestor 14 Labour for 9 KV Gapless type(5 KA) polymer lightening arrestor 15 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 16 Stringing of AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 17 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 18 Stringing of Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 19 Aluminium Binding wire and tape 20 Aluminium paint 21 Labour for Aluminium paint 22 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 23 Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 24 Back filling of poles with boulders. 25 Bentonite compound powder 26 Bi-metallic clamps Distribution Transformers Bushing 27 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 28 Complete jumpering of DTR 29 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 30 Labour for Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 31 Concreting of structures & foundation (1:3:6) 32 Labour for Concreting of structures & foundation (1:3:6) 33 Danger Boards Enamelled 11 KV 34 Labour for Danger Boards Enamelled 11 KV 35 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 36 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 37 G.I. STRIP 25X3 MM1 38 Labour for G.I. STRIP 25X3 MM1 39 G.I. WIRES 4.0 MM. (8 SWG) 40 Labour for G.I. WIRES 4.0 MM. (8 SWG) 41 G.I.Pipe 40 mm Dia C grade type 42 Labour for G.I.Pipe 40 mm Dia C grade type 43 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 44 M.S.Nuts with Bolts 45 Meter cum protection box for 25 KVA DTR 46 Labour for Meter cum protection box for 25 KVA DTR 47 Red oxide paint 48 Labour for Red oxide paint 49 Stay Insulators 90X65mm 50 Stay set complete without Stay wire 16 mm. (Painted) 51 Labour for Stay set complete without Stay wire 16 mm. (Painted) 52 STAY WIRE 7/3.15 MM.(7/10 SWG) 53 Stone Block/Pre cast block for base pedding(450X450X75MM) 54 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 55 Labour for Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 56 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 57 Stringing of XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 58 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 59 Stringing of XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 60 11 KV V cross-arms angle type (65x65x6 mm angle) 61 Labour for 11 KV V cross-arms angle type (65x65x6 mm angle) 62 11 KV Top clamps angle type65x65x6 mm 63 Labour for 11 KV Top clamps angle type65x65x6 mm 64 D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel 65 Labour for D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel 66 D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 67 Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 68 Transformer mounting Channel (100X50x6 mm.) 69 Labour for Transformer mounting Channel (100X50x6 mm.) 70 D.O.Mounting Channel75x40x6mm 71 Labour for D.O.Mounting Channel75x40x6mm 72 Trans.Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 73 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 74 Labour for Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 75 Back Clampfor 8 Mtr PCC Pole Size- 448 mm ,Wt- 1.075Kg using 50X6 mmMs Flat 76 Clampfor 8 Mtr PCC Pole Size-610 mm ,Wt- 1.46 Kg using 50X6 mmMs Flat

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	09-07-2025	DGM/STC/ASKN/Pur/25-26/101 Dt.09-07-2025	Date	14-07-2025

INR 236 /-

INR 1.27 Lakhs /-