|
| 1 | Steel Rule - 300 mm, Graduated both in Metric and English Unit |
| 2 | Steel Rule - 600 mm, Graduated both in Metric and English Unit |
| 3 | Gloves - Rubber |
| 4 | Industrial/ Safety Shoes |
| 5 | Industrial Helmet |
| 6 | V Block - 75 X 75 X 50 mm with Clamp |
| 7 | V Block - 150 x 100 x 75 mm with Clamp |
| 8 | Micrometer - Outside, 0 mm to 25 mm, LC = 0.01 mm |
| 9 | Micrometer - Outside, 25 mm to 50 mm, LC = 0.01 mm |
| 10 | Vernier Caliper - 0 mm to 180 mm, LC = 0.02 mm with fine adjustment |
| 11 | Micrometer: Inside, 5 mm to 30 mm |
| 12 | Engineer’s Square - 150 mm Blade |
| 13 | Engineer’s Square - 300 mm Blade |
| 14 | Angle plate - Adjustable - 250 X 250 X 300 mm |
| 15 | Spirit Level - 150 mm |
| 16 | File - Warding, Smooth, 150 mm with Handle |
| 17 | File - Knife Edge, 150 mm with Handle |
| 18 | File - Cant Saw, Smooth, 150 mm with Handle |
| 19 | File - Feather Edge, 150 mm |
| 20 | File - Triangular, Smooth, 150 mm with Handle |
| 21 | File - Round, Second Cut, 200 mm with Handle |
| 22 | File - Square, Second Cut, 150 mm with Handle |
| 23 | File - Square, Second Cut, 250 mm with Handle |
| 24 | File - Triangular, Second Cut, 200 mm with Handle |
| 25 | File - Flat, Second Cut, 250 mm with Handle |
| 26 | File - Flat, Bastard, 200 mm with Handle |
| 27 | File - Flat, Bastard, 300 mm with Handle |
| 28 | File Set - Needle, 160 mm, Set of 12 |
| 29 | File - Half Round, Second Cut, 250 mm with Handle |
| 30 | File - Flat, Bastard, 250 mm with Handle |
| 31 | File - Round, Bastard, 250 mm with Handle |
| 32 | File - Flat, Second Cut, 150 mm with Handle |
| 33 | File - Car Body, Bastard Cut without Tang, 300 mm with Handle |
| 34 | Oil Stone - 150 mm X 50 mm X 25 mm |
| 35 | Plier - Combination, 200 mm |
| 36 | Blow Lamp - 0.5 Liter |
| 37 | Spanner Set - Double Ended, 6 mm to 32 mm, Set of 12 |
| 38 | Spanner - Adjustable, 150 mm |
| 39 | Spanner Set - Box Type, 6 mm to 32 mm, Set of 12 |
| 40 | Magnifying Glass - 75 mm |
| 41 | Clamp - Toolmaker, 50 mm |
| 42 | Clamp - Toolmaker, 75 mm |
| 43 | Clamp - C, 50 mm |
| 44 | Clamp - C, 100 mm |
| 45 | Scraper Set - 200 mm, Triangular, Half Round and Flat |
| 46 | Chisel - Diamond Point, 9 mm X 150 mm |
| 47 | Chisel - Cold, 20 mm X 150 mm |
| 48 | Chisel - Cold, Round Nose, 9 mm X 100 mm |
| 49 | Motorized Tenon Saw |
| 50 | Hammer - Ball Peen, 800 grams with Handle |
| 51 | Hacksaw Frame - Adjustable, 250 mm to 300 mm |
| 52 | Hacksaw Blade - Length = 300 mm, Width = 12.5 mm, Thickness = 0.63 mm, TPI = 18, Low Alloy, Packet of 100 Blades |
| 53 | Hammer - Nylon, 30 mm with Handle |
| 54 | Precision Screw Driver - Set of 6 |
| 55 | Screw Driver - Insulated, 10 X 250 mm |
| 56 | Screw Driver - Insulated, 4 X 150 mm |
| 57 | Screw Driver - Insulated, 6 X 150 mm |
| 58 | Screw Driver - Insulated, 8 X 200 mm |
| 59 | Screw Driver - Insulated, 8 X 300 mm |
| 60 | Screw Driver - Philips, Set of 5 |
| 61 | Neon Tester - 500 V |
| 62 | Portable Electric Impact Drill Machine |
| 63 | Metal Cut-Off Circular Saw: Floor Standing |
| 64 | Portable Electric Hand Grinder: Straight |
| 65 | Portable Electric Air Blower |
| 66 | Portable Electric Jigsaw |
| 67 | Portable Electric Random Orbital Sander |
| 68 | Digital Torque Wrench - 20 Nm to 280 Nm |
| 69 | Lifting Tackle/ Sling: 1 Ton, 2 meters |
| 70 | Air impact Wrench with Impact Sockets |
| 71 | Laser Light Pen: Green |
| 72 | Surface Plate - Cast Iron, 600 x 600 mm with Stand and Cover |
| 73 | Screw Pitch Gauge Set - Metric and British, 0.25 to 6 mm, 21 Leaves |
| 74 | Laser Distance Measuring Instrument |
| 75 | Palm Scale: Table Top, 1000gm |
| 76 | Allen Key Set - Hexagonal, 1.5 mm to 10 mm, Set of 9 |
| 77 | Universal Quick Adjustable Multi-function Wrench Spanner Set |
| 78 | 1/2 Inch Socket Set |
| 79 | Two Post Car Lift - Capacity 4 Ton, Electric Operated |
| 80 | Two Wheeler Scooter Assembly Set |
| 81 | Transmission Gearbox Trainer |
| 82 | Demonstration Board: Electric Vehicle Cooling System |
| 83 | Mini Commercial Electric Vehicle Chassis |
| 84 | Engine and Transmission System for Electric Vehicle |
| 85 | Cut Section of Electric Vehicle Motors |
| 86 | HVAC Trainer |
| 87 | Multifunction Installation Tester |
| 88 | Electric Vehicle Service Equipment Test Adapter Kit |
| 89 | AC EV Charger Setup |
| 90 | Battery Tester with inbuilt printer |
| 91 | Lighting and Wiring System for Electric Vehicle |
| 92 | Instructor/ Office Chair - Non-Revolving, Mid Back, Mesh |
| 93 | Instructor/ Office Table |
| 94 | Green Board - 4 X 6 Feet |
| 95 | Stool - Height 600 mm |
| 96 | Working Table - 8 (L) X 4 (W) X 3 (H) Feets, Wooden Top |
| 97 | Steel Cupboard - Large |
| 98 | Steel Book Case |
| 99 | 7 Drawer Tool Trolley - W:D:H = 700:450:900, ± 25 mm |
| 100 | 5 Tray Cantilever Tool Box - W:D:H = 450:200:200, ± 20 mm |
| 101 | Dummy/ Mannequins - Male, Fiber |
| 102 | Mobile Lockable Shoe Rack: 24 Pair |
| 103 | Three wheeler Electric Rickshaw |
| 104 | Four wheeler Buggy (Golf Cart) |
| 105 | Electric Vehicle Diagnostic Scanner |
| 106 | Solar based Charging System |
| 107 | Electric Vehicle Tool Kit |
| 108 | Electrically Insulating Blanket |
| 109 | Clamps for Insulating Blanket |
| 110 | Insulated Rubber Mats |
| 111 | Arc Flash Suit 12 Cal/Cm2 |
| 112 | Gloves - Electrically Insulated |
| 113 | Industrial/ Safety Shoes - Electrically Insulated |
| 114 | Glove Inflator Kit |
| 115 | Goggle: White Glass |
| 116 | Platform Trolley: 150 Kg |
| 117 | Multimeter - Digital - 3 ½ Digit |
| 118 | AC Current Digital Clampmeter |
| 119 | Digital Continuity Tester |
| 120 | Tyre Pressure Gauge with Holding Nipple |
| 121 | Measuring Steel Tape - 5 meter |
| 122 | Soldering Iron Set: Mechanic Electric Vehicle |
