Construction Of Big Csc At Majilapur Birenda Vidyapith (H.S) Under Majilapur Gp Within Contai-I P.S In The District Of Purba Medinipur, purba-West Bengal

Construction Of Big Csc At Majilapur Birenda Vidyapith (H.S) Under Majilapur Gp Within Contai-I P.S In The District Of Purba Medinipur.-1 Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 240V DP 32 A with fuse on L&N Havells make 2 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+ 6 Way Havells Make 3 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection a) 32 A DP Havells Make b) 6-32 A SP Havells Make 4 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casing-capping and Switch board both on surface] 5 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] 6 Wiring in 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC 7 Supply & Laying 2core 4 sq mm Al armoured cable 8 Supply & Fixing 240 V,4 no 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 9 Supply & Fixing 240 V16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 10 Supply ultra bright LED tube light fittings with high efficacy suitable for installation existing tube light G13 Lamp holder to give glare light 1x22 W LED Tube 11 Supply of double bering ceiling fan of Heavels,Bajaj cromptan make with ISI make energy consumption 50/60 W 1200 mm sweep and including wiring the down road of standard length (upto 300 mm with all accessories as required complete. 12 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.. 13 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary copper wire connection as required by 2x1.5 sqmm flexible. 14 Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required 15 Supplying & Fixing 9 wattL ceiling light 16 Supplying & Fixing 10 wattL LED Lamp 17 Supplying 9 Exhaust fan 18 Fixing exhaust fan after making hole in wall and making good danages and smoth cement finish etc. as practicible as possible and providing necessary length of PVC insulated wire and making connection for exhanst fan. 19 Fixing only louver shutter/coul on wall haith necessary bolts and nuts (6 mm. dia. x 62 mm. long) 20   Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. 21     Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 22   Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 23 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: 24 Excavation of soil for installation of Earth Electrode and filling & ramming. 25 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 26 Extra for treatment of soil by using salt & charcoal or coke for plate electrode 27 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required 28 Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm alvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 29 Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 4 SWG

INR 2000 /-

INR 24000.0 /-

INR 11.97 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB