Annual Plan-Marakkara GP-PARANGI MOOCHIKKAD DRINKING WATER PROJECT-PURCHASE OF MOTOR-AND INSTALLATION-SO152/25-General Electrical Work-- 1 Eiectrification 2 OD395583/2024-2025:Supply and fixing dust and vermin proof 3 phase syntex meter board GSMB 6535 as required 3 OD395588/2024-2025:Supply and providing32A HRC fuse link with base and giving connection inthe existing meter board 4 OD395587/2024-2025:Supply and providing32A neutral link mounted on DMC/SMC base and giving connection in the existing meter board 5 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) 6 2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N 7 OD395581/2024-2025:Supply and fixing L&T make MUG-6 DOL starter,relay range,9-14 A ,cat NO,SS97756 COVO consisting of volt meter,/ ammeter/single phasing cum dry run preventor etc suitable for 5 HP submersible motor pumpset on existing board and giving connection as required 8 90.14.24.17:Supply & fixingthe following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. 9 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 10 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 11 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 12 OD396499/2024-2025:Supply and providing digital multi function meter to readV,A,F,3phase accuracy class 0.5 in the existing panal board and giving connection as required 13 OD395580/2024-2025:Supply and providing 50/5 A,75/5 A,5 VA accuracy class 3 tape wound meteringCT and giving connectionas required, 14 OD395591/2024-2025:Supply and fixingphase indication lamp (led) red/yellow on existing board and giving connection 15 OD395590/2024-2025:Supply and fixingphase indication lamp (led)blue on existing board and giving connection 16 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm 17 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 18 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 19 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm 20 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm 21 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 22 OD399174/2024-2025:Supply and providing superior quality brass bolt with hexagonal/square head,nut and washers for the following size etc as required25*6 mm 23 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 24 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 25 90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm 26 OD395579/2024-2025:Supply and providing 20mmor nearest size nylon rope 27 OD399320/2024-2025:Supply and providing stainless steel adaptor suitable for 60/63mm column pipe as required 28 OD399321/2024-2025:Supply ,laying and jointing of 60/63 mm column pipe of aproved make conforming to relevant standards using leack proof materials as required. 29 90.17.8.5:Providing, laying, testing & commissioning of B class heavy duty G.I. pipe conforming to IS1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. andfixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two ormore coats of synthetic enamel paint of required shade complete as required :65 mm 30 OD395582/2024-2025: Supply , installation testing and and commissioning ofnew open well submersible motor pump set of 5 HP3phase,380/400 V,50 Hz 2880 rpm, 32-83 Mthead 360-60LPMDischarge EAVM 30J/5 ofTEXMO or equivalent make of CRI/KIRLOSKER/DECCAN/ V GUARD in open wellusing chain pully/tripole, giving connection to delivery pipe using leack proof materials tied and suspended on support and clamps giving electic connection and conductingtrial run at full load 31 OD395586/2024-2025:Charges for preparation ofKSEB Test reportfor submitting to the concernedKSEB Section office 32 pipe 33 50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 34 50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
