Repair and Renovation of Vallimandapam in Arulmigu Vadapalani Andavar Temple, Vadapalani, Chennai-26.; 1 Removal of old Doors and Windows including removal of frames, hinges and fastenings stacking of reuseful materials and as directed by the departmental officers at site of work. 2 Removing and carefully AC sheet roof etc, complete complying with standard specification and as directed by the departmental officers at site of work. 3 Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs 4 Removal of Flag stone in roof or floor including lifting and stacking of Stone and as directed by the departmental officers. 5 Dismantling RCC clearing away and carefully stacking materials useful for re-use for any thickness and as directed by the departmental officers. 6 Dismantling Brick masonry in Cement mortar in walls and carefully stacking materials useful for re-use for any thickness and as directed by the departmental officers. 7 Dismantling Pressed tiles & weathering course and carefully stacking materials useful for re-use for any thickness and as directed by the departmental officers. 8 Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 9 Dadooing Ceramic Tiles of size 300mm x 450mm x8mm 10 Flooring with Joint free Rectified Glazed Ceramic Flooring tiles of size 305 x 305 x 8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) 11 Brick work in Cement Mortar 1:6 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9 x 4-3/8 x 2-3/4 for foundation and basement including curing, etc., complete complying with standard specifiction. 12 Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. 13 Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. 14 Painting two coats of old plastered wall surface with ready mixed water based emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 15 Supplying and fixing Aluminium sheet roof of 0.71mm thick including fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. 16 Supply and fixing Mild Steel Grills for windows and ventilators etc., including the cost of mild steel angles, plates, rods, cost of welding charges and one coat of priming coat etc., complete.(The design should be got approved by the departmental officers.) 17 Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of Zincromate priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 18 Supplying and fixing Teak wood scantlings including materials and labour Charges etc., complete complying with standard specification and as directed by the departmental officers. 19 TW Scantlings over 2m and below 3m 20 TW Scantlings below 2m 21 Supplying and fixing Teak wood ornamental Fully Panelled Doors-Doubleleaf 1500 x 2100 shutter of 30-45 Cm wide and 40mm thick well seasoned Teak woodplanks. The scantlings of size 6x 3 (150X75mm) Vertical and top rails. The furniture fitting such as butt hinges made out of brass6Nos of size 50mm length with proper brass screws ofheavy duty. The hinges are placed in such a way that the surface of frame and hinges should fall on the same plane. The door stopper2 Nos of brass and 2 nos of brass handles heavy duty in each side and 4 Nos brass tower bolts areproperly fixedetc., complete complying with standard specification and as directed by the departmental officers. 22 Supplying and fixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4Aluminum butt hinges,2nos 6Aluminum tower bolts,2nos 4Aluminum handle, 1 no Aluminum drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no Aluminum door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification. 23 Painting the wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 24 Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 270 Kgs / m3, weight 1.8 / 2.4 / 4 kg / m2 which issuspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x 600mm module. The subtex nubby square edge of size 595 x 595x 15mm shall be placed into the grid size of 600 x 600mm. Ensurearrow marks behind the tiles are oriented in one direction to achieveuniform shade. The systems to achieve noise reduction coefficient not less than 0.50 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication. 25 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the solid panel PVC Door with frame 26 UPVC WindowSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 27 UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutterprofile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. 28 Supplying and filling in foundation, basement, etc with filling m-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 29 Supply and fixing of paver block with new one of paving and layingthe rubber moulded hydraulic presses paver block inter locked blocks with new one of 83mm thick inter locked blocks of approved quality and make over a sand cushion and laying the paver blocks in true and straight alignment with gradient and pointing neatly using quarry dust of fly ash and pointing neatly hire charges for vibrator machine including diesel consumption charges etc., completecomplying with standard specifications and as directed by the departmentalofficers. 30 Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. 31 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers 32 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with P or S trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). 33 Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) 34 Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia B class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). 35 Wiring with 2x 1.5 sq.mm. (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC Rigid pipe on wall and ceiling and switch drop portion PVC Rrigid pipe concealed in wall with PVC accessories with Module GI switch in flush wall with6A one way module switch with module front plate with continuous earth wire connection by 1.5 sqmm. PVC insulated copper wre painting of suitable colour for Open PVC Light point/ fan point (For electronic regulator) (4 points/ per coil) 36 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) 37 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections 38 Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections 39 Supply and fixing of 2nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections 40 Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug inflush with wall with earth connection (For AC Plug) 41 Supply and Fixing of Single Box type fitting with 1 No.20W Direct LED Tube Complete Set with TW Round block on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/ Equ make) 42 Supply and fixing 7W/9W LED bulb for BH point (cost of fancy glass shade) 43 Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb 44 Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. 45 Supply and fixing of 100 W LEDflood light Fitting UniFlood lighting luminaire with single die ceramic base hig power LED, PDC housing and unique flood optics (NB)to ensure uniform distribution fitting with angle iron frame work complete connection etc (Higher End) 46 Supply and fixing of 30W LED flood light fitting (Higher End) with necessary bolts and clamps on angle iron frame work with electrical connection complete 47 Supply and fixing of 16 Air circulator metal wall mounting fan complete connection etc. 48 Supply and fixing of 1200mm (48) sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp 49 Supply and fixing of 1200mm (48) sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1.5m down rod on the existing fan clamp 50 Supply and fixing of 300 mm (12) sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall. 51 Supply and fixing of louvers shutters arrangements for 300mm (12)sweep (light duty) AC exhaust fan. 52 Supply and fixing of 450 mm (18) sweep (Heavy duty) AC exhaust fan complete with Connections complete.. (Khaitan/ Almonard / Equiv) 53 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 54 Supply and laying of 2 x 10 sq.mm PVC armoured LTUG Alu.cablein a trench to be excavated at a depth of 0.75 Mtr in suitable size HDPE pipe and refilling the earth to make good. 55 Supply and clamping of 2 x 10 sq mm PVC armoured LTUG Alu. cableon post or on wall with special MS Clamps. 56 Supply and frxing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection 57 Supply and fixing of 3 nos.6A two modular 5 pin socket , 3 nos. 6A Modular concealed box ( GI ) in flush with wall with connections. 58 Supply and fixing of 2 pole sheet steelenclosure with32A Double pole MCB innecessary connection complete etc. 59 SLDB:-Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End 60 Supply and fixing of Three phase 4way Vertical type MCB distribution board with MetalDoor cover Code IP42 Protection , with 63A 4 pole MCB as incoming and 2 Nos 32A TP MCB, and6 Nos-6A-32A SPMCB as Outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/Legrand make)@ Pump Room 61 MCCB DB:-Supply and fixing of Three phase 8 way Vertical typeMCCB distribution board with MetalDoor cover Code IP42 Protection , with 125A 4 pole MCCB as incoming, 2 Nos-32A TPMCB and 18 nos 6A-32A SP MCB as Outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCCB DB and MCB’s should be with ISI mark. (Hager/Legrand make) 62 Supply and fixing of 250A TPN switch disconnection fuse in sheet steel enclosure with HRC Fuses and neutral on suitable angle iron frame work with MS Cable boxes earhthingonly. 63 250A Panel:-Supply, Erection, testing and commissioning of 250A capacity dust and vermin proof cubical Vertical type panel board made up of 16SWG CRCA sheet with supply and fixing of the following interior mountingswitches with HRC fuse link arranged Horizontally with horizontal bus bar chamber and left and top side cable chamber.1)Incoming-250A 4pole MCCB-1 No with spreader link and Rotary Handle 2) Outgoing- 125A TPN MCCB-2 Nos with spreader link and Rotary Handle3) Outgoing- 160A 4pole MCCB-1 No with spreader link and Rotary Handle4) Outgoing- 100A TPN MCCB-5 Nos with spreader link and Rotary Handle5) Outgoing- 63A TPN MCCB-2 Nos with spreader link and Rotary Handle.The bus bar chamber shall consist of 4 Nos 1 x 1/4” copper flats for 3phases andneutral and inter connection between incoming MCCB and interconection in between 160A,125A,100A&63Amps. The SWG No.8 for double earth connection for all incoming and outgoing switches 1”x1/8”copper flat shall be The copper buses shall be mounted on SMC bus bar insulator at proper and sufficient interval as per IE rules. 64 The bus bar chamber shall be segregated from the adjacent chamber by providing hylum sheet of 3mm thick as partition.Heat shrinkable sleeves shall be provided for bus bar with colour codeThe panel shall be provided with metering chamber consisting of 0-500V Voltmeter with selector switch, 0-200A Ammeter with selector switch and CT coil. LED indication lamp shall be provided with to toggle switches and backlit fuse units.The panel shall have powder coated painting of approved colours, approved by the department officers. The DANGER board / caution board shall be fixed in front side of panel boardThe panel shall be mounted on 4” x 2” x ¼” MS base channel provided all round at the bottom of the panel.The whole arrangements shall be erected on a masonry pedestal / Angle iron frame work to be constructed with suitable foundation with bolt and nuts, such thatthe lowest MCCBsunithandle is at aheight of 0.75m from the ground level (Note: All MCCBs shall be ofL&T/ Siemens make) 65 Supply, erection, testing and commissioning offloor/wall mounted cubical type panel made up of 16 SWG CRCAsheet metal fabricated powder coated ATS control panel for 125 KVA Diesel generator set for the following accessories. 1)200A 4 Pole ATS (L&T/Socomec make)-1No.2)200A 4Pole MCCB for EB (L&T Make)-1 No.3)200A 4PoleMCCB for DG (L&T Make)-1 No4)Auxillary cotact for Timer-2Nos 5) Multifunction Meter-1No6)Auto/Manual Selector switch consisting of ON/OFF-1No7) Timer-2Nos8)R,Y,B Indication Lamp-6 Nos9)EB ON Indicator-1No10) DG ON Indicator-1No11) Control wiring-1 Job12) 6A DP MCB-2Nos13)10A Single Pole MCB-6Nos14)200/5A CT Coil-1No15)Neutral Terminal block-1No16)Push button-3Nos17)LVM-2Nos18) Panel box-1 No of size 1600 mm x900mm x350mm with necessary bus bar arrangement towards transportation assembling, erection, commissioning and testing etc. 66 Supply and Fixing of 63A FP Pole MCB (legrand Make) with suitable Sintex Enclosure Box in flush with wall with earth connection 67 Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour. For 5A Plug 68 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. For 15A Plug 69 Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour. (For 2 Nos 16A Plug &20A MC Plug) 70 Supply and run of Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire with painting of suitable colour. For12way SPN MCB DB 71 Supply and run of Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire with painting of suitable colour. For63A 4Pole MCB enclosure 72 Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. For Pump Room 4way vertical DB and 8Way TPN MCCB DB 73 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 74 Earthing as per ISI specification with an earth electrode of 2.1m class ‘B’ GI pipe of dia not less than 40mm, with copper earth plate of size 125mm X 50mm X 6mm with necessary funneling arrangements with necessary masonary work and with 38mm RCC cover slab for the brick masonary. 75 Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 76 Supply and clamping of 3 1/2 x 185 sq mm PVC armoured LTUG Alu.cable on post or on wall with MS Clamp. 77 Supply and fixing of brass cable gland for 3 1/2 x185 sq.mm. PVC armoured LTUG cable with earth connection 78 Supply and providing cable end termination of 3 1/2 x 185 sq.mm.PVC LTUG armoured Alu. cable with necessary aluminum cable sockets by crimping etc. with electrical connection complete 79 Supply and laying of 3 1/2 x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 1.15 metre layer of sand and covering the cable completely with bricks and sand refilling the earth to make good. 80 Supply and clarnping of 3 1/2 x 95 sq.mm PVC armoured LTUG cable on post or on wall with MS clamps 81 Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection. 82 Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 83 Supply and fixing of aluminium profile with LED Strip light with drivercomplet connection etc. at center of Marriage Hall 84 Supply of 8.5 TR norminal capacity Ceiling Supsended ductable air conditioner with the following components.8.5 TR capacity Ceiling supsended Ductable Air conditioner high tech, low height, low noice level indoor unit with fin and tube type cooling coil, Detachable type drier provided in refrigerant circuit to reduce moisture content multi stage type distributor for feeding equal quantities of the refrigerant mixture to all the section of the coil, with required valves, directly coupled blower to reduce troubles and wear & tear compared to belt drive blower.Thermostatic expansion valve lift and pull type aluminum framed durable, washable air filter.Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP / LP safety cut to improve reliability of compressor. 85 Supply of 8.5 TR capacity Seiling Supsended ductable air conditioner high tech outdoor unit with power saving high efficiency sturdy and rugged 1 No of scroll compressor for each circuit with inbuilt internal thermal protector, internal pressure relief valve, Auto reset type HP/LP safety cut out to improve rerliability of compressor and condensor shell be made of super slit high efficient aluminum fins mechanically banded to sopper tubes condenser L type coil to be rigidly fixed to unit frame with fasteners. imported condenser fan & fan blades to statically and dynamically balanced to reduce noise and vibration.The fans are direct driven 3 or single phase motor with protection.Condencing temperature 130 F for the system operations. 86 Supply and filling of R-22 Refrigerant gas 87 Supply and fixing of suitable MS angle frame for mounding the outdoor unit 88 Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads. 89 Supply and fixing of hard drawn copper refrigerant piping of 5/8 dia interconnecting indoor and outdoor units with necessary fittings, supports etc. 90 Supply and fixing of hard drawn copper refrigerant piping of 7/8 dia interconnecting indoor and outdoor units with necessary fittings, supports etc. 91 Supply and erection of 3 star rating 1.5TR Capacity Hi-wall mounting split air conditioner with copper coil confirming to ISN 1391 (part2) 1992 with amendment No. 1 except power consumption (norms) fixed with hermetically sealing compressor operation R22 non CFC for wall mounting with minimum power consumption suitable for operation on 230volt, 50HZ,AC power supply complete performing following functions1. Cooling2. Dehumidifying3. Air circulating4. Filtering (Make Blue star/carrier midia/voltas/(or) Equ) (M-1986) Rooms -6 Nos 92 Supply and fixing of 4KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation on 230v 50c/s AC supply. (Make. V-guard) 93 Supply and fixing of condenser iron stand suitable for 2.0TR / 1.5TRsplit type AC units 94 Supply and laying of 5/8”&3/8”dia additional copper pipe along with 2.5sqmm 3core power cord wire with insulation etc. 95 Supply, fabrication and erection of fabricated ducting made up of GI sheets of 22 gauge thickness 96 Supply, fabrication and erection of fabrication of ducting made up of GI sheets of 24 gauge thickness 97 Sub total 98 GST 18%
