Tender For Fountains And Paint Work In Nehru Park, Tonk-Rajasthan

Tender For Fountains and paint work in Nehru Park-- 1 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 3 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure A attached with this BSR 10.0 Sq. mm 2 core 4 3 core 5 Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating at synchronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturers design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. complete in all respect as per specification, scope of work and direction of Engineer in-charge of following power rating, suitable for prescribed duty conditions mentioned in TD. 5.5 KW (7.5 HP) 6 Angular Jet Nozzle SmallMake-:RAJ Body-GM with cromplated 7 Angular Jet Nozzle LargeMake-:RAJ Body-GM with cromplated 8 Necessary Plumbing work Complete Plumbing Work Haevy quality with B class G.I. Pipe T. band Sokit Etc. with Brass ball Value. 9 Electrical Panel with TimerOperation panel with timer switch should be double doorpowder coating with MCB/Fuse/IndicatingSwitch ampmeter,voltmeter and other equipmentwith Auto Timer 10 Submersible Mono block Pump 5 HP Body- Standless Steel Body Make-:Aroma, Duke, Raj etc. 11 Installation, Testing & Commissioning 12 LED Based Colour Changing Light Nozzle Mounted Light Colour - Programmable Model-96R PVCMake- RAJ Operating Voltage -18 V DC 13 Necessary Electric Work Such as conducting with Tin/Silver plated wire cabling etc. 14 Micro processing ControllerHaving many operate for colour above lightMake-:RAJ 15 Power supply 16 Decorative Electric Lemp Small

INR 500 /-

INR 18620.0 /-

INR 9.31 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB