Tender For Construction Of Godown 1250 Mt And Construction Of Shed 225 Sq.Mt
Tender Value
1.72 Crore
Estimated cost
Bid Submission
30 Jul 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chopda → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Godown 1250 Mt And Construction Of Shed 225 Sq.Mt
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means |
| 3 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means |
| 4 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchionsetc. |
| 7 | Providing andlaying Cast insitu/Ready Mixcement concrete M-20of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, |
| 8 | Providing andlaying Cast insitu/Ready Mixcement concrete M-20of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, |
| 9 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementand structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 12 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructureincludingstrikingjoints, rakingout joints, watering and scaffolding etc. Complete |
| 14 | Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. |
| 15 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, archesetc. asper detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 16 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 17 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 18 | Providing and fixing self supporting steel roofing system for a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 0.80 millimeter |
| 19 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 20 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 21 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 22 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. |
| 23 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. |
| 24 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 25 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. |
| 26 | Providing and fixing partition of welded mesh of 3 mm dia. wires 50 mm x 25 mm size mesh including integrated non teak seasoned wood frame 80 x 50 mm of vertical and horizontal scantling and finishing with oil painting 3 coats etc. complete |
| 27 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 28 | ROAD WORK |
| 29 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.) |
| 30 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. |
| 31 | Providing dry rubble stonepitching 23 cm (about 9 ) thick including all material, quarry spalls, labour etc. complete. |
| 32 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete |
| 33 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 34 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 35 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, |
| 36 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specifiedgrade preparing existing roadsurface, heating and applying bitumen @ 0.98 KilogramSquare Metre. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 37 | ELECTRIFICATION WORK |
| 38 | Supplying,erecting & terminating FRXL PE insulated,galvanised steel for med wire armoured (strip) cable 1100V, 3core 4 sq.mm. copper conductor complete erected with glands & lugs,on wall / trusses/ pole orlaidin provided trench / pipe as per specification no. CB-LT/CU |
| 39 | Making trench of suiable width and depth in hard murum/tar road for laying provided LT cable up to and including 36sq.mm complete as per specification no. CW-EXNCTR |
| 40 | Making trench of suiable width and depth in Soft murum for laying provided LT cable up to and including 36 sq.mm complete as per specification no.CW-EXN- CTR |
| 41 | Suply inngerecting mains PVC un armoured cable1100volt grade / ISI mark 3 core / 2.5sq mm standard /soild copper complete erected on wall with duly painted G.I.Saddle @ 0.25 Mc / C & rididly grouted in the wall with the help o fplateds crews. |
| 42 | Suplyinng erecting waether proof powdero at eddistribution board 4 way with 2x 6/ 10 Amps S.P.M.C.B.with in dustrial two pin plugs ocket 10A and 3 pin plug top10 A with topcover necessary connection etc. complete with approved make. |
| 43 | Providing point wiring for street light with PVC unarmoured cable 1100 Volt grade ISI mark 3 core 1.5 sqm standard / soild coppererected on wall with G.I. saddle dulypainted @ 0.25 m C / Crigidly grouted in the wall with the help of plated screw including 4\"x4 \"M.S.box 2 way with epoxy painting &inside 10 amp Nylonconnecto rstrip for street light connection an dflexible cableof 2 mtrs.for street light connection etc.completeas directed by engineerin charge |
| 44 | Supplying & erecting 10-12 W, 230 vinteg ralty pe LEDl amp suitable for B-22 / E-27 base |
| 45 | Supplying & erecting LED street light fitting suitable for 20 to 25 W. with PF>0.95 classI P-65 and above housing of pressure die castaluminiumalloy and; heat sinkextruded aluminium complete as per specification No.FG-ODF/FLS |
| 46 | Supplying & erecting StreetlightWallbracketmadefrom40mmdia \"B \"classG.I.pipe 1-2 min total length complete asper specificationno.FG-BKT/WB |
| 47 | Supplying & erecting with galavanised iron earth plate size 60x60x0.6 cm complete with all material stesting & recording the results as per specifications no.EA-EP |
| 48 | Providing Pipe type earthing with 40 mm diaG.I. pipeor 20 mm dia G.I. rod complete with all materials apers pecification no EA-EP providing pipe type earting with 40 mm dia G.I. pipe or 20 mm dia G.I. Rod complete with all materials as perspecification EA-EP |
| 49 | Supplying erecting & marking DPMCB6A to 32 AC-series (for motor / power ) in provided distrubtion board as per specification no SW-SWR / MCB |
| 50 | Supplying erecting & making SPMC B6 A to 32AB-series(for Lighting) in provided distrubtion board as perspecification no SW-SWR/MCB |
| 51 | ROYALTY |
| 52 | Sand |
| 53 | Other Minarels |
| 54 | MATERIAL LAB TESTING |
| 55 | Sand- Fineness Modulus,silt and clay content |
| 56 | Aggregate/Crush material a) Carrying out water absorption |
| 57 | b)specific gravity |
| 58 | c) Impact Value |
| 59 | d) Crushing Value |
| 60 | Cement- Cement- Standerd Consistency fineness, Specific gravity, Setting Time Initial And Final compressive strenght, sound ness |
| 61 | Cement Concrete- M10 Compressive Strength set of 3 cubes per 1 test |
| 62 | Mix Design-M20 |
| 63 | M20- Compressive Strength set of 3 cubes per 1 test |
| 64 | TMT steel bars- Steel - Tensile strength,Yield stress, ultimate tensile stress,%elongation, weight per running meter,Bend/Rebendtest.(Set of 3 Bars) upto 16 mm (set of 3 bar) |
| 65 | Murum- Plastic Index, Bulk Density, |
| 66 | Bricks Crushing Value, Absorption Value, Specific gravity |
| 67 | ESHS PLAN |
| 68 | ESHS (Environment Safty and Health ManagementLabour Facilities (Lump- Sum Amount ) |
AI Tender Summary
Tender Timeline
Jun 30, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender