|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Coarse sand (zone III) |
| 4 | Portland Cement |
| 5 | Coarse sand (zone III) |
| 6 | stone for masonry work |
| 7 | structural steel such as tees,angles,channels and R.S joists |
| 8 | Red oxide Zinc chromate primer |
| 9 | Adjustable span ESO+SI (2.35-3.40) |
| 10 | Adjustable telescopic prop 3m (2.02-3.75m) |
| 11 | Twisted steel/deformed bars |
| 12 | stone aggregate (single size): 10mm nominal size |
| 13 | solid blocks of size 30x20x15cm |
| 14 | chain link fabric fencing mesh of size 50x50mm made of GI wire of dia 4mm |
| 15 | fine sand (zone IV) |
| 16 | mild steel tubes not finished welded type |
| 17 | welding by electric plant |
| 18 | GI trafford profile sheet 0.35mm thick |
| 19 | bitumen washer |
| 20 | stainless steel screws 50mm |
| 21 | precoated galvanised steel plain ridges |
| 22 | plasticizer / super plasticizer |
| 23 | production cost of concrete by batch mix plant |
| 24 | pumping charges of concrete including Hire charges of pump , piping work & accessories etc |
| 25 | bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 26 | wall form panel 1250x450 mm |
| 27 | corner angle 45x45x5 mm 2.50 long |
| 28 | column clamp 450x1070 mm |
| 29 | prop 2m (2-3.5m) |
| 30 | multi surface paint |
| 31 | special primer (C.W) |
| 32 | Anjili wood scantls |
| 33 | bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 34 | bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 35 | bright finished or black enameled mild steel screws 40 mm |
| 36 | bright finished or black enameled mild steel screws 20 mm |
| 37 | Dehradun white lime |
| 38 | solid blocks of size 40x20x20cm |
| 39 | Hire charges of concrete mixer 0.25 to 0.40 cum with hopper |
| 40 | vibrator (needle type 40mm) |
| 41 | sundries |
