External Electrification Work At Sector-2 (Part) In Jagrati Vihar Extension Scheme No.-11, Meerut. - H.T. WORK 2 Supply and erection of following steel tubular polesBottom Portion Galvanised with base plate with 1/6 over all length of pole grouted with cement concrete below G.L. in 1:4:8 (1 Partcement 4 part coarse sandand 8 part 40mm nominal size OBB) including plinthing of pole 30cm above the groundlevel and 10cm below G.L. with 1:2:4 (cement, coarse sand & 20mm nominal size stone grit),plastering it with 1:4 (1 part cement 4 part coarse sand) also painting,numbering and making of strip with enamel paint in white and P.O. red colour in alternate layers of 20cm upto 1m above the plinth on pole including excavation, back filling etc. rate includes cost of all materials, labour, T & P etc. required for proper completion of work as per direction of E/I.[MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 3 410 SP 5511.0M long 4 S/Fixing of F-bracket for 11 KV pin insulator 5 On S.T. pole 6 S/F of V-shape cross arm made of M.S. channel size 75x40mm(5.7kg/m) 7 S/F of straight M.S. channel size 100x50mm (7.9 kg/m) 1.380m . Long 8 S/F of straightM.S. channel size 75x40 mm (5.7kg/m) 2240 mm long for guarding. 9 S/F of clamps make of 75x10mm M.S. flat with packing piece for securing channel of item no. 3, 4 & 5 with the following types of supports. These will be painted with Al. paint in two coats over one coat of red oxide primer, complete with bolts & nuts etc. 10 For S.T. pole 11 Supply & erection of D clamps (For Disc Insulator)Made of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . 12 S/F of 11 KV pin insulator with pin on steel poles or any where specified including bolt and nut to fasten the pole cap/cross arm with the pole. 13 S/F of 11 KV disc. Insulatorfittings B/S type on cross arm/clamps fixed on poles including bolts, nuts and washers etc. for proper completion of work. 14 S/F Eye bolt 100x12mm with nut on guarding channel fixed on steel supports. 15 Supply and errection of suitable size of ACSR conductor weasel, rabbit, raccoon & dog conforming to latest relevant IS specification on steel support including binding, jumpering, sagging and cost of all material, labour and T & P required for proper completion of work as per direction of E/I. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 16 Raccoon/Dog 17 Supply and Errection of 7/16 SWGG.S. wire used with guarding channel on steel poles including the cost of material, labour and T & P etc. required for proper completion of work. 18 S/F of Cradle type guards of 6 SWGG.I. wire including binding etc. complete. 19 Making suitable earthing for H.T. overhead line pole with 2.5 Mts. long 20mm dia.M.S rod connected with 7/16 SWGG.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I. 20 Supply & erection of stay set at 3.5 Meters away from the pole complete with galvanized iron 19 mm dia x 1.80 Metres long stay rod, 30 cm x 30cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19mm600 mm double screwtightener, 7/3.5 mm G.I. Stay wire etc. in 1:3:6 cement concrete complete in all respect. 21 Supply and Erection of strut stay atleast 1.8Mts. away or as per actual site requirement for following types of supports duly grouted plinthed with cement concrete in the ratio 1:4:8 (1 part cement, 4 part coarse sand and 8 part 20mm size nominal size grit) plastered with cement, coarse sand mortar in the ratio 1:4 (1 part cement & 4 part coarse sand) painted and numbered in the same manner as already specified for S/F of respective support for L.T. works. Including 2 Nos. D clamps made of 50x6mm M.S. flat with nut bolt and washers required for proper completion of work as per direction of E/I. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 22 410 SP 55, 11 Mts. long S.T. Pole 23 S/F of danger boardsize 200x250mm at suitable height of pole as per direction of E/I. 24 S/F of barbed wire (1.5kg) duly clamped with 20x3mm M.S. flats at both ends on steel poles at suitable height as per direction of E/I. 25 Supply/laying of following type high conductivity aluminum strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment at a depth of 1 Mtr. Below ground level over a cushion of 75mm thick sand around and protection with brick on sides, top of cable shall be properly connected with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. [MAKE :-POLYCAB/ GLOSTER/ STERLITE/L.S./HAVELLS/ UNIVERSAL ONLY AFTER GETTING G.T.P. APPROVED BY PVVNL] 26 300 Sqmm 3 Core 27 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: [MAKE :-RAYCHEM/ MSEAL/3M] 28 300 Sqmm for 11KV cable S.I. No. 10.5.4 29 L. T. WORK 30 Supply and erection of 8.5 Mtr. long PCC pole conforming to the I.S.S. No. IS 2678-1960,IS 1343-1960 & IS 456-1964 grouted with 1:4:8 cement, concrete ( 1 cement, 4coarse sand and 8-OBB of 40mm nominal size including plinthing with 20mm nominal size stone grit 10cm below the G.L. & 30cm above the G.L. plastering with 1:4 cement mortar, painting and numbering of pole and making strip with enamel paint complete with all materials, labour and T & P etc. and also including the cartage of pole to site of work. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 31 8.5 Mtr. long PCC pole 32 S/F of suspension type clamp made of Al alloy and shall be capable of holding Al alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel, the clamp size 50x6mm M.S. Flat shall be provided with black weather resistant plastic coating of atleast 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall providesufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finish and all ferrous fittings, eye hook, bolts, nut and washer shall be galvanized with zinc and it also includes all the cost of material, labour T & P proper completion of work. 33 S/F of dead end clamp made of high strength Al alloy and U-bar shall be made ofhot dip galvanised steel and eye hook of forged steel or mild steel, the clamp size of 50x6mm M.S. flat shall be provided, all ferous fittings, eye hook, bolt, nut and washer shall be galvanised with zinc including the cost of material, labour. T & P for proper completion of work. 34 S/F of piercing connector made of Al alloy suitable of holding main conductor/ tap conductor of compacted diameter the connector shall be covered by the black weather resistant insulation cover made of polyethylene atleast 2 mm thick to avoid short circuit and corrosion including the cost of material, labour. T & P for proper completion of work. 35 For phase wire 36 For street lightwire 37 S/F of connector for neutral conductor. 38 S/F of distribution board box for three phase 10 way 100 Amp. connection made of Standard Approved Make Size 450x300x200mmcomplete with 03 No. kit kat 63Amp phase bus bar 25x5mm, neutral bus bar 20x5mm, copper flat, clamps holes etc. including the cost of material, labour,T & P etc. required for proper completion of work. 39 S/L of following size of Arial bunch cable 1100 V grade conforming to latest relevant specification on steel/PCC supports including binding, jumpering sagging and cost of material, labour,T & P etc. required for proper completion of work. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 40 (3Cx120 + 1CX95+1CX16)Sqmm 41 (1Cx35 )Sqmm 42 (1Cx16)Sqmm 43 Supply & erection of stay set at 3.5 Meters away from the pole complete with galvanized iron 19 mm dia x 1.80 Metres long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19mm600 mm double screwtightener, 7/3.5 mm G.I. Stay wire etc. in 1:3:6 cement concrete complete in all respect. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 44 Supply and erection of strut set atleast 1.5 meters away or as per actual site requirement grouted in the same manner as specified for respective supports & plinthing of pole with 1:4:8 cement, concrete (1 cement 4 coarse sand and 20mm nominal size stone grit) 40cm high with 30cm above G.L.& 10cm below G.L., plinthing, plasteringand painting including D clamps made of 50x6mm M.S. flat with bolts nuts and washers etc. complete in all respect as per direction of E/I with following supports 45 With 8.5 Mts. long PCC Pole 46 Making suitable earthing for PCC/ST poles with 2.5Mts. long 20mm dia M.S. rod with 7/16 SWGG.S. wire in 15mm dia 2Mtr. long G.I. pipe duly clamped with 3 nos clamps and binding on poles including cost of labour & T & P etc. required for proper completion of work. 47 Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects as per direction of E/I. 48 16 Sqmm. 49 35 Sqmm. 50 TRANSFORMATIONWORK 51 Supply and erection of double pole structure made of following types of support duly grouted in 1:4:8 cement concrete (1 cement, 4 coarse sand and 8 grit of 20mm nominal size plinthed plastered & painted in the same manner as already specified for respective supports suitable for plinth mounted type substation with different types of M.S. Channel and angle iron duly fabricated for disc insulatorfittings, D.O. fuse set, TPMO ladder stand projecting outside,dropper and bracings , including cost of all material, labour and T & P required for proper completion of work as per drawing and direction of E/I.[MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 52 11 Mts. long 410 SP 55 S.T. Pole Bottom section Galvanised with base plate. 53 Supply and erection of 11 KV TPMO set complete in all respects.(as per specification no. 21) 54 Supply and erection of 11 KVD.O. fuse set complete in all respects. (as per specification no. 22) 55 Supply and fixing of H.T./L.T. jumpering and connections on double pole/four pole, lightning arrestor and transformer. The rates include the cost of all materials, labour and T & P etc. required for proper completion work. 56 Supply Installation, Testing and commissioning of 11 /0.433 KV Level-2 type copper wound out door type Delta star distribution transformer of following capacity. As per latest specification of PVVNL. The rates also including loading unloading local carriage and T & P charges etc. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL, HAVING VALID TYPE TEST, NOT BLACK LISTED BY ANY DISCOM WITH IN 7 YEARS] 57 250 KVA, 58 400 KVA, 59 Supply installation, testing & commissioning of L.T. ACB and earthing with existing earth through GI strip of size 40x4mm or 7/8 SWG, GS wire as per direction of E/I. The rates are upto destination including loading, unloading and local cartage charges and cost of all materials, labour and T & P etc. required for proper completion of work as per direction of E/I. [MAKE :- ONLY THOSE MANUFACTURER WHOSE G.T.P. IS APPROVED BY PVVNL] 60 630 Amp. 61 800 Amp. 62 S/F of lightening arrestor set (3 Nos.) suitable for mounting on steel supports complete with all materials, labour and T & P required for proper completion of work as per direction of E/I. 63 Supply & erection of TPN distribution pillar fabricated with wire clad, dust and vermin proof as per drawing consisting suitable size of copper bus bar 60x10mm or equivalent sectional area consisting Henleys pattern fuse unit set complete as follows, Metallic pillar shall be made of 14SWG, MS sheet on frame of angle iron size 35x35x5mm duly painted with two coat of approved paint over rust resisting primer both side locking arrangement with handle & danger board complete with suitable masonary plate-form for mounting the pillar. The pillar shall have earthing terminals as per direction of E/I. 64 2 incoming 300 A fuse unit and out going 4 Nos. 200Amp. 65 2 incoming 500 A fuse unit and out going 4 Nos. 300Amp. 66 Construction of fencing plinth of following sizes in Ist class brick work including plaster and providing flat brick soling and pointing the same with 1:3 cement and fine sand mortar over 75mm thick cement concreting in the ratio 1:6:12 in open space of the cage as per direction of E/I. 67 6x4x0.30 M. size 68 Supply of fixing of 2.45M. High cage fabricated with 3.0mm thick expanded metal/wire mesh of equivalent weight fixed on 50x50x6mm angle iron frame having vertical members spaced at 1.0M to 1.25M. and horizontal members spaced at 1.20M the vetical members shall be grouted in ground and horizontal members in the wall to a depth of 300mm with ends folded. The cage shall have 1000x2000mm size single leaf door with locking arrangement having door frame fabricated with 35x35x5mm angle iron and 3mm expanded metal wire mesh of equivalent weight duly fixed with the cage member. The cage shall have nut bolt arrangement for opening the sides by providing tees 45x20cm of angle iron size 50x50x6mm as per direction of E/I. It shall be painted with red oxide primer and synthetic enamelled paint as per direction of E/I. including all materials, labour and T & P for proper completion of work.PWD SOR (Elect.) 2018 SI No. 1142 69 Supply and burying of safe earthing Electrode T-39 Cu (Copper) Coated, Length up to 3000mm, outer pipe 76.3 mm x 3.2mm inner pipe 42.4 mm x 2.6 mm, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anticorrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make as per approved in U.P.P.W.DSOR (Elect.) 70 Construction of plinth for Transformer size 2.0x1.25x1.0 Complete With all materials, labour and T & P required for proper completion of work as per specification drawing and direction of E/I 71 Supply and laying of following size of Al. conductor PVC insulated armoured, served sheathed cable 1100V grade at a depth of 75cm. below ground level over a cushion of 75mm thick sand all around and protected with brick on sides And Top. On surface the cable run shall be fixed on M.S. clamp etc. of suitable size and for crossing of the road, cable should run through 140mm dia hume pipe and in case of air like catenary it shall be hanged with the help of G.I. wire, clipped at several places as per direction of E/I for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamp etc. [MAKE :-POLYCAB/ GLOSTER/ STERLITE/L.S./HAVELLS/ UNIVERSAL/KEI ONLY AFTER GETTING G.T.P. APPROVED BY PVVNL] 72 240 Sqmm3½core 73 400 Sqmm 3½ core 74 Supply and fixing of palm or pin copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects. 75 120 Sqmm 76 240Sqmm 77 400Sqmm 78 S&F of 100 Amp. 415 V metal clad TPN HRC type switchfuse unit complete with HRC fuse on angle iron bracket complete in all respect.[ONLY PWD APPOVED MAKE] 79 S/F of following type of G.I. pipe B class for cable clamped with supports by 3 Nos. clamps made of 50x6mm M.S. flat and suitable size of nut bolt and washer required for proper completion of work as per direction of E/I.[MAKE :-TATA/SAIL/JINDAL] 80 100 mm dia 81 STREET LIGHTING WORK 82 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 65 and above protection complete in all respects.[MAKE :-POLYCAB/ HAVELLS/ PHILIPS/ G.E./ SYSKA/ CROMPTON, THE MODEL OF ABOVE MAKE SHOULD BE APPROVED BY UPPWD IN CAT.-AAA] 83 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 Watt. to 50 Watt.Confirming to IP 65 and above protection complete in all respects. [MAKE :-POLYCAB/ HAVELLS/ PHILIPS/ G.E./SYSKA/CROMPTON, THE MODEL OF ABOVE MAKE SHOULD BE APPROVED BY UPPWD IN CAT.-AAA] 84 Supply and laying of following size of Al. conductor PVC insulated armoured, served sheathed cable 1100V grade at a depth of 75cm. below ground level over a cushion of 75mm thick sand all around and protected with brick on sides And Top. On surface the cable run shall be fixed on M.S. clamp etc. on suitable size and crossing the road, cable should run through 140mm dia hume pipe and in case of air like catenary it shall be hanged with the help of G.I. wire, clipped at several places as per direction of E/I for proper completion of work. The armouring of cable shall be properly connected with earth conductor by clamp etc. MAKE :-POLYCAB/ GLOSTER/ KEI/STERLITE/ L.S./HAVELLS/ UNIVERSAL ONLY AFTER GETTING G.T.P. APPROVED BY PVVNL] 85 16 Sqmm 2 core (i) 86 25 Sqmm 3.5 core(j) 87 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.
