Tender For Repair /Maintenance And Painting To Steel Furniture For Otm And Md Accn Under Ge (East) Delhi Cantt-10; 1 A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu i.e. in repair/replacement of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting,placing everypart in-tact, for following items here-in-after including finishing with paint etc as per direction of BOQ, Notes at the end of BOQ & as per drgs.B) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(East) Delhi Canttincluding BSO Furniture Yard as directed by Engineer-in-Charge 2 Table Office Officer Steel : FD-84/1003 3 a)Legs, as per drg 4 b) S/S Lock of drawer/shutters(Make-Godrej/Harrison/Ebco/Mydas) as per drg 5 c) Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. 6 d) Stiffeners as per drg 7 e) PVC Shoes std quality all as per drg 8 f) Welding the joints of legs / square tube as per drg 9 g)Top 16 mm thick plywoodBWP gradeISI marked(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium)with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancingwhite sunmica 0.8/1 mm thickwith 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. 10 Table Office Clerk Steel : FD-84/381 FD 1004 11 a) Legs, as per drg 12 b) Lock of drawer(Make- Godrej/Harrison/Ebco/mydas) as per drg 13 c) Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. 14 d) Stiffeners as per drg 15 e) PVC Shoes std quality all as per drg 16 f) Welding the joints of legs / square tube as per drg 17 g)Top 16 mm thick plywoodBWP gradeISI marked(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium)with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancingwhite sunmica 0.8/1 mm thickwith 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. 18 Almirah Large Steel : FD-67 / 1031/MAP/18/ TP 19 a) S/S 6 lever locks (Make-Godrej/Hettich/Harrison/mydas/Rina ) as per drg 20 b) CP Handle as per sample/as per drg 21 c) Legs as per drg 22 d) Repairs to door as specified including replacement of hinges 23 e)Repair/adjustment to existing shelf including welding as per drg 24 f) Shutter/door as per drg. 25 g) Shelf as per drg 26 Almirah Medium / Small Steel: FD-1032/FD-104(M) 27 a) S/S 6 lever locks (Make-Godrej/Hettich/Harrison) as per drg 28 b) CP Handle as per sample/as per drg 29 c) Legs as per drg 30 d) Repairs to door as specified including replacement of hinges 31 e) Repair/adjustment to existing shelf including welding as per drg 32 f) Shutter as per drg. 33 g) Shelf as per drg 34 Table 3x2 with and w/o drawer: FD-1008/1007 35 a) Welding wherever required asdirected by E-in-Incharge 36 b)Top 16 mm thick plywoodBWP gradeISI marked(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium)with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancingwhite sunmica 0.8/1 mm thickwith 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. 37 c) Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. 38 d) Rubber shoe std qualityas per drg 39 e) SS Lock of drawer as per drg (make-Harrison/Ebco/Godrej/Ebco/Mydas/Rina) 40 REPAIRS TO TEAPOY VERANDAH, FD-35 :- 41 a)Top 16 mm thick plywoodBWP gradeISI marked(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium)with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancingwhite sunmica 0.8/1 mm thickwith 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. 42 b) centrestiffener with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc.complete all as specified and shown in drawing and directed by the Engineer-in-Charge. 43 c) sidestiffener with with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc.complete all as specified and shown in drawing and directed by the Engineer-in-Charge. 44 d) leg of table with with 19/20 mm conduit pipe ofwall thickness 1.6 mm including necessary cutting, welding etc.complete all as specified and shown in drawing and directed by the Engineer-in-Charge. 45 e) hard rubber shoe of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge. 46 Shoe Rack Steel FD/E6/MAP/02® 47 a) Welding including bar whereverrequiredas directed by E-in-Incharge 48 b) Jaliwherever requiredas per drg 49 b) Hard rubber shoes std quality as per drg 50 Chair Verandah :FD/E6/MAP-17 51 a) Conduit section any member of MS conduit pipe 16G, 19mm dia including painting with primer as per drg. 52 b) Welding joints of leg of 19/20mm MS tube & other jointsas per drg as directed by EIC 53 c) Hard rubber shoes as per drg and as directed by EIC 54 d) PVC Sheet from seat & Back of chair verandah and supply &fixing of theapproved new PVC Sheetin seat & Back of existing chairall as specified(colour of cane shall approved by EIC/GE) 55 Locker Steel: FD-1029/257/SKD-562 56 (a) S/S Hasp & Staple ,restas per drg 57 (b) Repairs to door/sidesincluding replacement of hinges including welding 58 c) Shutter/door as per drg. 59 (d) Legs as per drg 60 (e) CP Conduit pipe as per drg 61 f) Shelf as per drg. 62 Charpoy IP Hard Top: FD/MAP-II/01 63 a) 12 mm thickplywood top BWP grade(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium) as per existingshape and size withshunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by EIC 64 b) Hard rubber shoe std quality as per drg 65 c) Welding work wherever required as directed by EIC 66 Chair School with hand board :FD/E6/MAP/05 67 (a) One piece seat and back (Make: Blowplast/Supreme or equivalent ) as per drg. 68 b)Top 16 mm thick plywoodBWP gradeISI marked(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium)with 0.8/1 mm thick laminate(Make- Archidply/greenply/century) in colour/shade as approved by EIC/GE and balancingwhite sunmica 0.8/1 mm thickwith 2/1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. 69 (c) Welding work wherever required as directed by EIC. 70 (d)Hard rubber shoe std quality as per drg 71 Charpoy GI pipe ply top: FD-220 72 a) Removing of old unsv plywood top from existing charpoy GI pipe (held with furniture yard) shall be re-assembling/ tightening of charpoy frame and providing new 12mm thick plywood top BWP grade (Make- Century Ply Sainik 710/ Greenply Green Old/ Archidply Platinum/ Duroply titanium) as per existing shape and size with sunken nut bolts completeall as drg and as directed 73 b) 895 mm long stifnner made FI of size 40x5 mm thickduly paintedwith red oxide primercomplete all asdirected by EIC.fabrication as per item 13(a) 74 c) long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg Make of pipe JINDAL/Prakash/TATA complete all as specified and directed. 75 d) short rail from charpoy GI pipe 32mm bore but except pipe including cutting threading etc as required and directed.Note : Pipe shall be used from unserviceable long rail obtained from item No 13 (c)here in before. 76 e) legs from charpoy GI pipe 32mm dia but except pipe including cutting threading etc as required and directed with bottom plug made of MS Round disc and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed. Note :Pipe obtained from ser item No 13 (d) above shall be used for this items. 77 f) GI 3 way elbow 32 mm dia complete all as specified and directed. 78 g) 32mm check nutscomplete all as specified and directed. 79 h) Welding work wherever required as directed by EIC 80 Charpoy IP folding : FD-388(R ) 81 a) 08 mm thickplywood top BWP grade(Make-Century plySainik 710/Greenply Green gold/Archidply Platinum/Duroplytitanium) as per existingshape and size withshunken nut/boltscomplete rest all as drg and as directed 82 b) Hard rubber shoe std quality as per drg 83 c) Welding work wherever required with FI as directed by EIC 84 REPAIRS TO CHAIR CB STEEL WITH ARM AND WITHOUT ARMS, FD-75 (M) :- 85 a) Material & Labour for removing the existing worn out/unserviceable seat of chair CBA steel and S&F new seat frame of size 460mm x 420mm made from commercial plywood 12mm thick and 50mm thick 32 Density foam cushion, duly covered with cloth/ rexine of approved quality and shade, duly stitched all as directed by Engineer-in-Charge. 86 b) All as per Ser No 15.01 (a) but for back of chair CBA Steel of Size 460mm x 380mm. 87 c) M&L for welding with 25mm x 3.0mm MS flat iron 510mm long with holes to fix Nuts and bolts to seat/back frame for fixing seat/back frame including nuts complete all as specified and as directed by Engineer-in-Charge. 88 d) S&F new PVC Caps 89 e) S&F new PVC arms as per sample. 90 f) Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed for the Engr-in-Charge. 91 REPAIRS TO CHAIR VERANDAH (MAP) WITH ARM:- 92 a) S & F of new seat made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 435mm x 410mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing andas directed.Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. 93 b) S & F of new back made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 305mm x 305mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing andas directed.Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. 94 c) Hard rubber shoe/Toe best quality as per drg or as directed. 95 d) Welding work wherever required with FI as directed by EIC 96 A) M&L for painting one coat of synthetic enamel paint (1st quality) withshade as approved by EIC/GEthrough spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or similar items on duly prepared surface after removing of dust, dirts,dents, filling cavity/hole with putty etc, all as specified and shown on drgs and directed by Engineer-in-Charge.B) Work will be executed where the furniture exist in different User Units/Md accns of GE(East) Delhi canttincluding BSOs Furniture Yard as directed by Engineer-in-Charge 97 Almirah Steel Medium/Small: FD-1032 98 Almirah Steel Large: FD-67/351, 1031/MAP-18 99 Charpoy IP Hard Top: MAP 100 Chair Verandah: MAP/FD 101 Locker Steel :FD-1029/257/127 102 Table office officer steel: FD-1003 103 Table Clk steel: FD-1004 104 Table 3x2 with and w/o drawer: FD-1007/1008 105 Teapy verandah 106 Charpoy IP folding: FD-388 (R) 107 Chair Verandah MAP with Arm 108 Rack steel any type/Book Shelf open large all type :FD-1038 & 1023/69 109 Rack Shoe Steel FD-FD/E6/MAP/02 R 110 Charpoy GI pipe ply top: FD-220 111 Chair School with hard board :MAP 112 Notes for BoQ:-(a) The furniture article as and when received fromUnit/Occupant as case may be, the Engineer-in-Charge (BSO) shall enter these furniture articles in furniture deposit register (IAFW-1830) and shall subsequently issue for necessary repair/polishing to the Contractor through Nominal issue voucher(NIV) mentioning the date of issue duly signed by the contractor. In certain cases the repairable furniture article can also be issued directly from units.(b) The contractor shall return these furniture articles after repair work on or before 30 days from the date of issue of furniture and nominal Receipt Vouchers (NRV) shall be issued duly signed by furniture I/C, BSO and Contractor. (c) If the contractor fails to repair and return these furniture article within 30 days, a penalty of Rs 10 per furniture article per day will be levied to contractor and the same will be recovered from contractors dues.(d) Generally the periodicity for issue of furniture from BSO Yard shall be once or twice in a month (reckoning from date of commencement of work as per WO No.1) subjected to the users requirement/availability of furniture for repair works. However care shall be taken that repairable furniture shall be issued not more than 20% of total qty of CA provision in one month. (e) Removal of Existing componants of following MES Pattern Furniture Items Carefully without disturbing the adjoining Parts and S&F new componantsof same patternas per Drgin lieu of Dismantled /Discordedcomponants including Tighting the Joints, Pinning, Screwing, wedging, Gluing, Providing Hinges, Placing every part in-tact condition.(g) Cleaning, Derusting of Stain/Dirt old polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying paint for steel surface/two coats of French Polish for wooden Items as applicable on the same. (h) Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting /Polishing on whole Items should be matched and desired finish shall be obtained.(j) Work will be executed where the Furniture Items exist in different user units/ Md accn under AOR of GE (East) Delhi Cantt including Furniture yard of BSOs Sub Division.
