Tender For Provision Of Living, Store And Toilet Under The Aor Of Ge 874 Ews; 1 Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed. 2 Excavation in trenches, n exc 1.50 mtr wide and n. Exc 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and getting out complete all as specified and directed. 3 Removing of excavated material exc. 250m but not exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 4 Returning filling in including spreading levelling watering & well ramming in layers n. exc 25cm thick complete all as specified and directed. 5 M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. 6 M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well complete all as specified and directed. 7 M&L for rendering 15mm thick on other than fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finishing the surface even and smooth without using extra cement, complete all as specified and directed. 8 M&L for applying two coats of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall including preparation of surface complete all as specified and directed. 9 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. 10 M&L for hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed. 11 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finished even and fair, complete all as specified and as directed. 12 Supply and fix Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 thick screed mortar in CM 1:6 complete all as specified and directed. 13 M&L for glazed ceramic colour tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour oftile over and including 15mm thick screed bed in CM 1:4complete all as specified and directed. 14 M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. 15 M&L 75mm thick PCC 1:4:8 Type D-2 (40mm graded aggregate) as in sub base flooring finishing cement concrete complete all as specified and directed. 16 M&L 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed. 17 S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwincluding necessary scaffolding, anytype, any location/height complete all as specified and directed. 18 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed. 19 M&L 40 mm (for ceiling) puff insulated panel made of 0.50mm thick hot dipped galvanised sheet on both side with 40mm thick ridge polyurethane foam provided with tongue and groove joint for interlocking ,to be fixed with inverted CRCA tee section 50x50x5mm thick andL section of 50x50x5mm thick fixed to roof trusses complete all as specified and directed. 20 M&L for sliding type three track aluminium window (SIZE_ 1.00M X 1.20M) or ventilator provided with top and side member 92x31.7x1.5mm thick (1.06 kg/RMminimum weight) bottom three track rail shall be 90x31.75x1.5mm(1.248 kg/Rm ) shutter shall of40x18x1.55 mm section (0.547 kg/Rm weight) shutter shall be provided with handle and self locking arrangement .Interlocking style shall of 40x18x1.45mm (0.607 kg/Rm ) panel shall be of 6mm thick clear grade 6/2 Rs 1.3mm polycarbonate sheet . The window shall be fixed to wall panel as standard practice two shutter shall glazed and one shutter shall be of stainless steel wire gauged complete all as specified and directed. 21 M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 22 S&F 4.8 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed 23 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 24 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mmwood grain printedcolour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. 25 S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed. 26 S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed. 27 S & F Mild steel pressed handles, 150mm oval type, stove enamelled black 28 S & F vitreous China wash basin white flat back, size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type,pillar tap,15mm bore,screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. 29 M&L Aluminium puff insulated door shall be both solid as well as fly proof main door shall be 50mm thick including all fittings such as hinges, tower bolt, sliding bolt, handles, door closer etc complete all as specified and directed. 30 M&L 25 mm dia curtain rod mild steel powder colour coated fancy type with fixing arrangement for window and door the length shall be 450mm longer than opening size complete all as specified and directed. 31 M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe -410-W(gde-E-250) Quality A complete all as specified and directed. 32 M&L for mild teel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. 33 M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed. 34 M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm andn exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed. 35 M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for finished surface of concrete complete all as specified and directed. 36 M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc for fair finished surface of concrete complete all as specified and directed. 37 M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. 38 M&L for Mild steel TMT bars 5mm dia and over and up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde-I,IS 432 (part I) complete all as specified and directed. 39 M&L for RCC M-25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. 40 M&L for RCC M-25 as Columns, pillars, piers, posts and struts complete all as specified and directed. 41 S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed. 42 S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed. 43 S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed. 44 S&F bib taps cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. 45 S&F vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and flushing pipe, including PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr capwhite with flush pipe & all fitting with provision of cement concrete bedding complete all as specified and directed. 46 M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. 47 S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I complete all as specified and directed. 48 S&F ball valves, high pressure, with polythene float and fly nut, 20mm bore complete all as specified and directed. 49 S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed. 50 S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 51 S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and directed. 52 S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed. 53 S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed. 54 S & F 110mm dia PVC (SWR) pipe complete all as specified and directed complete all as specified and directed. 55 S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed. 56 S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed. 57 S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with door access complete all as specified and directed. 58 PVC (SWR) vent cowl 75/110 mm dia complete all as specified and directed. 59 S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick plywood and fixed to wooden plugs with chromium plated brass screws and cap washers complete all as specified and directed. 60 M&L PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. 61 M&L for rough excavation not exc. 1.5 m deep and getting out in any type soil complete all as specified and directed. 62 Removal of excavated material and depositing where directed at a level n. exc. 1.5 m above the starting point exc. 500 m distance but n exc 750m complete all as specified and directed. 63 M&L for conventional 10 users on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil including providing PCC (1:4:8) type D-2, 150 mm thick in foundation, Vent shaft, connection etc., complete all as specified and directed. 64 M&L for construction of Soakage well, of size 1.20 m dia at bottom and 3.00 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. 65 M&L for SGSW line 150mm dia SGSW pipe laid in trenches and jointed complete all as specified and directed. 66 M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded aggregate) for 150mm bore pipe complete all as specified and directed. 67 M&L for machine pressed precast concrete, rubberised finished, interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thick M-35 grade with grey cement and no pigment over 30mm thick sand filing under floors or pavers complete all as specified and directed. 68 Removing excavated material and depositing where directed at a level n. exc. 1.5 m above the starting point beyond 750m and upto a total distance of 1 Km complete all as specified and directed. 69 M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. 70 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed 71 Supply only liquid water proofing compound complete all as specified and directed. 72 M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. 73 M&L for RCC M-30 as Columns, pillars, piers, posts and struts complete all as specified and directed. 74 M&L for RCC M-30 as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. 75 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. 76 M&L rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. 77 M & L for preparation of new plaster surface of wall and applying two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified and directed. 78 M&L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates as in sub base to floor/path/hardstanding etc. complete all as specified and directed. 79 M&L for machine cut kota stone slab flooring 20-25mm thick over 15 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed 80 M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with complete all as specified and directed. 81 S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm) with GI suspended system, metal frame work, G.I. wire mesh in false ceiling complete all as specified and directed. 82 S & F Steel windows with side hung shutters including frame, projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. 83 S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors etc complete all as specified and directed. 84 S&F Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. 85 S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, Fe 410 -W (Gde-E- 250) quality-A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. 86 S&F Cast iron or malleable cast iron handles 150mm, cast type, stove enamelled black complete all as specified and directed. 87 S&F MS flat iron as in hold fast, pintle hinge etc complete all as specified and directed. 88 S & F 300 mm long steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. 89 M & L PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate). 90 M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:4 91 Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone. 92 M&L extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement, including forms, moulds etc. 93 M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping/conduit pipe (as per site requirement)including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed or one fan/one bell point controlled by one switch. 94 All as per item No 93 above but for one socket outlet 5 pins 5 amps controlled by one switch on same board. 95 All as per item No 93 above but for one socket outlet 5 pins 5 amps controlled by one switch on independent board. 96 All as per item No 1herein before but wiring with 2.5 sqmm copper wire (FRLS)and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. 97 M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as specified and directed. 98 S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. 99 S & F switch socket combination 2 in 1, 5A flush type complete all as specified and directed. 100 S&F socket outlet multi 5 pins 5 amp, complete all as specified and directed. 101 Supply and fix water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed. 102 M & L for ceiling rose, PVC/Polycarbonatethree terminalscomplete all as specified and directed. 103 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 104 Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 105 Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V , 50 Hz, RPM 1200, cooper winding of sweep 300 complete all as specified and directed. 106 M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed. 107 S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way incl blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. 108 S&F MCBs single pole 240 volts 6 to 32Amps 10 KA C series complete all as specified and directed. 109 S&F MCB single pole & neutral 40 to 63 Amps 230 VoltsC series, 10 KA complete all as specified and directed. 110 Supply and fixing in replacement Exhaust fan AC single phase, 1200 rpm 230/240V of size 250mm sweep with louvre heavy duty complete all as specified and directed. 111 Supply and fix in replacement, water heater storage type , electric capacity 25 ltr along with all accessories BEE 5 star rated, complete all as specified and directed. 112 S&F building security light fitting in repair LED 35 Wattfor Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 including driver unit and bracket made up of GI tube of suitable size (1.2 Mtr Length)etc complete all as specified and directed. 113 M & L for sub main wiring with two single core 2.5 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping25 mm dia with all fittings and accessoriesand one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old unserviceable submain wiring and making good disturbed surfacecomplete all as specified and directed. 114 M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate as shown in electrical plate no 3. complete all as specified and directed. 115 S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm diaGI suspension ire one twin core flat cable of circular of size 16 sqmmcomplete all as specified and directed. 116 Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed. 117 M&L for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required complete all as specified and directed. 118 M & L Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. 119 Supply and fix in replacement of off load changeover switch AC, 4 pole, 415 volt upto 125/200 AMP complete all as specified and directed. 120 S&F GI water tubing 25mm bore medium grade, galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed. 121 S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed. 122 M&L for Ferrule the existing main water supply pipe line 150/100/80 mm bore CI/DI/GI line for branch connection of the internal dia 20 mmStraight plain brass ferrules (or connecting screws) screwed both ends and internal dia 40 mm complete all as specified and directed. 123 Supply and Fixing Earth continuity conductor with 25x3 mm aluminium strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any ther indicated situation for loop earthing etc complete all as specified and as directed. 124 Supply and Fixing Earth continuity conductor with 32x6 mm GI strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and as directed. 125 Supply and fixing porcelain/epoxy white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding / fixing roof conductor / down conductor of lightning conductor complete all as specified and as directed 126 Supply and fix GI pipe 40mm dia light grade for protection ofEarth strip lain in trenches or on walls with necessary clamps all as specified and as directed. 127 Supply and fix single pointed air termination aluminium rod 12-mm dia 300 mm long with fixing arrangement including dismantling of old unserviceable/ de shaped conductor and removed from site of work complete all as specified and as directed 128 M&L of test point terminal block made of gunmetal of phosphor bronze size 75x75x25mm drilled and screw including 3 Nos 8mm dia 25mm long hex head screw with necessary arrangement for fixing to wall complete all as specified and directed. 129 M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected tousing galvanised iron strip 32×6mm as earthing lead earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including testing on completion complete all as specified and directed.
