Tender For Repair And Polishing To Certain Wooden Furnitures Under Ge Central Bangalore, bangalore-Karnataka

Repair And Polishing To Certain Wooden Furnitures Under Ge Central Bangalore; 1 NOTE FORALL ITEMS: (i)Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new componentsin lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs.(ii Work will be executed where the furniture exist in different User Units of GE (Central)Bangaloreincluding BSOs Furniture Yard as directed by Engineer-in-Charge. Bed hard with ply top:FD-246(a) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and directed by Engr-in-Charge. Plywood top 12mm thick of size bed hard complete 1830 x 900 mm. (BWR) as per IS-303 (07 ply). 2 (b) Long rail of teak wood of size 100mm x 50mm x 1980mm. 3 (c)Short rail of teak wood of size and shape as per drg. 4 (d) Centre Stiffner 5 (e)Ply wood 4mm thick teak faced to the direct vision of head rest and ply wood commercial 4 mm thick to other side including 12mm thick half round cut teak wood beading alround. 6 (f) Foot rest. 7 (g) Head board frame complete with legs 12mm dia half cut round teakwood beading. 8 (h) Foot rest. 9 (i) Leg to head rest side of bed. 10 (j) Leg to foot restside of bed. 11 Bin Linen Multipurpose(FD/E6/MAP/09)(a) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the Bin solid multi purpose complete and all as specified and shown on drg. 18mm thick pre-laminated particle board top of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around. 12 (b) 18mm thick pre-laminated particle board bottom of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around. 13 (c) 18mm thick pre-laminated particle board side of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around. 14 (d) 18mm thick pre-laminated particle board drawers of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around. 15 (e) 18mm thick pre-laminated particle board shutter of existing bin soiled linen multi purpose of shape and size shown on drawing including 4mm thick teak wood beading all around. 16 (f) Chromium plated handle fancy type 100mm as per sample. 17 (g) Plywood 12mm thick commercial on back side of the Bin soiled linen multi purpose including legs frame. (Teak wood if reqd). 18 Chair DiningJCO/OR MAP (FD/MAP-II/05)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bomboo pins and other members of the chair dining JCO/OR MAP complete and all as specified and shown on drg. (a) Rear leg 19 (b) Front leg 20 (c)Seat frame front/rear rail 21 (d) Back rest 22 (e) Seat fram Side rail 23 (f)Stiffener 24 (g)Taking down Unsv PVC seat from chair of shorts and refixing with best quality new PVC seat 4mm thick including holes & screwed with rail all as per drg. 25 Chair wooden bottom(FD -285)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair wooden bottom complete and all as specified and shown on drg. (a)Rear leg 26 (b)Front leg 27 (c)Seat frame front / back rail 28 (d)Seat frame side rail 29 (e)Stiffener 30 (f)Seat of 6mm thick plywood one side teak face of BWR grade fixed with screw. 31 Chair Dining MAP Officer (FD/MAP-II/04 & FD/E6/MAP/10 (R))Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw only of the chair complete all as specified in drawing directed by Engr-in-Charge. (a)Rear leg 32 (b)Front Leg 33 (c)Seat frame side rail 34 (d)Seat frame front and back rail 35 (e)Stiffner 36 (f)Back rest, Side & middle stiffner 37 (g)S & F second class hard wood corner/ bracket L shape of size 50 x 50 x 20mm thick fitted with screw between side rail to leg. 38 (h)Removal of existing unserviceable seat cushion with tapestry cloth of Chair dining officer (MAP) and provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth not less than Rs 250/- meter of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge 39 (i)Removal of existing UNSV seat tapestry cloth of chair Dining (MAP) officer and provision of New seat cloth with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in-charge 40 Chair Dining Cushioned Long Back (FD-357)Supply and fixing of the following new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak wood including titning other parts with scew/bamboo pins only of the Chair dining Cushioned long back complete all as specified in drawing & directed by Engineer-in-charge.(a)Front legs 41 (b)Rear legs incl back frame 42 (c)Front & Back rail 43 (d) Side rail 44 (e)S & F second class hard wood corner/ bracket L shape of size 50 x 50 x 20mm thick fitted with screw between side rail to leg. 45 (f)Removal of existing unserviceable seat cushion along with tapestry cloth 400 GSM of Chair Dining long back and provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge 46 (g)Back 47 Sofa Set 3/4/5 Seats FD 281/373 /FD/MAP-II/02Supply and fixing of the following new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts with cew/bamboo pins only of the sofa complete all as specified in drawing.(a)Front legs for three/single seater sofa 48 (b)Rear legs for three/single seater sofa 49 (c)Long front & Back rail for three seater sofa 50 (d)Long front & Back rail for single seater sofa 51 (e)Stiffner for three/single seater sofa 52 (f)Side short rail for three/single seater sofa 53 (g) Arms rest for three /single seater sofa. 54 (h)Plywood 470mm for three seater sofa. 55 (i)Plywood 470mm for single seater sofa. 56 (j)Removal of unserviceable seat and back tapestry cloth and unsv cushion of sofa set three seater and supply and fixing with new cushion 550mm x530mm x4700mm thick of 32 Density duly covered with well finished best quality tapestry cloth (250 GSM) of approved make/shade including providing quality ZIP all as specified and shown on drawingand directed by Engr-in-charge. 57 (k)replacing cushion and tapestry cloth for Sofa set 4 seater 58 (l)replacing cushion and tapestry cloth forSofa set 5 seater 59 (m)Removal of unserviseable replacing tapestry cloth from seat and back of Sofa set Three seater providing new tapestry cloth of 250GSM of approved make/shade duly providing quality Zip all asper specified and directed by Engr-in-charge 60 (n) replacingtapestry cloth only for Sofa set 4 seater 61 (o) replacing tapestry cloth only for Sofa set 5 seater 62 Stool Dressing with Cushioned (FD/E6/MAP/14 )Supply and fixing of the following new parts after removingbroken / unserviceable parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the Chair Easy Cushioned complete all as specified in drawing.(a)Leg 63 (b) Side rail 64 (c) Stiffner 65 (d) Removal of existing unserviceable seat cushion with tapestry cloth/ Rexine cloth 180 GSM of Stool dressingwith cushionedand provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth/ New Rexine cloth of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge 66 Table 3 x 2 (900 x 600 x 760 mm) with drawer and without drawer FD-41/283 & FD-42/284 & FD-55Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and asdirected by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sideof size 900 x 600 x 18mm thick with 4 mmthick half round teak wood beading alround. 67 (b) Long rail 68 (c) Short rail 69 (d) Legs 70 (e) Short / Long Stiffeners 71 (f) S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs. 72 (g) Drawers complete as per drg 73 Table Centre (900 x 450 mm) (FD-274)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both side of size 900 x 450 x 18mm thick with 4 mmthick half round teak wood beading alround. 74 (b) Front and back rail 75 (c) Side rail 76 (d) Legs 77 (e) Short / Long stiffeners 78 (f) S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs. 79 Peg Table(450 x 300 mm)(FD-277/384)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sideof size 450 x 300 x 18mm thick with 4 mmthick half round teak wood beading alround. 80 (b) Front and back rail 81 (c) Short rail 82 (d) Legs 83 (e) Short / Long stiffeners 84 (f) S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs. 85 Table Dining 06 Persons(1500 x 900 mm) (FD-273)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing directed by Engr-in-Charge. (a)Table top newmade ofpre laminated particle board (exterior grade ) with teak face both sideof size 1500 x 900 x 18mm thick with 04 mmthick half round teak wood beading shall be provided all round. 86 (b) Front and back rail 87 (c) Side rail 88 (d) Legs 89 (e) Stiffeners 90 (f) S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs short rail to legs. 91 Table Dining 08 persons(1800 x 900 mm) (FD-273)Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sideof size 1800 x 900 x 18mm thick with 4 mmthick half round teak wood beading alround. 92 (b) Front and back rail 93 (c) Side rail 94 (d) Legs 95 (e) Top centre stiffeners of size 100 x 25mm 96 (f) S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs. 97 Table Dining 4 Person (1200 x 900 x760mm) FD/MAP-II/03Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sides of size 1200 x 900 x 18mm thick with 4 mmthick half round teak wood beading alround. 98 (b) Front and back rail 99 (c) Short / side rail 100 (d) Legs 101 (e) S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs. 102 Teapoy Wooden (600 x 450mm) FD-278/382Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sideof size 600 x 450 x 18mm thick with 4 mmthick half round teak wood beading alround. 103 (b) Front and back rail 104 (c) Short / side rail 105 (d) Legs 106 (e) Short / long stiffeners 107 (f) S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs. 108 Table Writing FD- 275Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. (a)Table top made ofpre laminated particle board (exterior grade) with teak face both sides of size 1145 x 600 x 18mm thick with 4 mmthick half round teak wood beading alround. 109 (b) Front and Back Rail 110 (c) Side rail 111 (d)Legs 112 (e) Short & Long Stiffner 113 (f) Drawers of table as per drawing. 114 (g) Cabinet Shutter/Door of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board (Exterior Grade) with teak wood beading shall be provided all round including continuous piano hinges 40mm wide upto Shutter height with screw. 115 (h) Cabinet Sides of table made out of 18mm thick prelaminated particle board (Exterior Grade) duly fixed by screw. 116 (i) Cabinet Back side of table made out of 6mm thick plywood to be fixed as per drawing. 117 (j) Aluminium anodized knob 25mm of best quality. 118 (k) Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shown in drg. 119 (l) S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs. 120 Table Dressing Ladies with Mirror FD-378(a)Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and as directed by Engr-in-Charge. 5mm thick looking mirror for table dressing ladies fixed to the frame complete. 121 (b) 5mm sheet glass of shutter size 280 X 265 mm including sliding wheel complete. 122 (c) Plywood, 12mm thick, commercial on back side of the table complete. 123 (d) Ply wood 4mm thick back side ofthe mirror complete. 124 (e) New knobs aluminiumanodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter of Cup Board. 125 (f) Table top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete. 126 (g) New drawer of dressing table as per drawing. 127 Table Dressing Gents with Mirror FD-379(a) Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Dressing table top or bottom fabricated out of pre-laminated particle board with teak veneers both side 18mm thick fixed to timber frame work with screws complete all as shown on drawings. 128 (b) Side rail fabricated out of pre-laminated particle board with teak veneers both side size of 18mm thick fixed to frame work with screws complete all as shown on drawings. 129 (c) Plywood, 12 mm thick, commercial on back side of the table complete all as shown on drawings. 130 (d)Aluminum anodized knob 25 mm of best quality. 131 (e) Looking mirror 5.0 mm thick fixed to the frame of table dressing gents complete all as shown on drawings. 132 (f) Table Drawers fabricated out of pre-laminated particle board 12mm thick for front side, 12mm thick plywood for side & back and 6mm thick plywood for bottom complete all as shown on drawings. 133 Side Board FD-371/372/1112(a)Supply and fixing the following new parts after removing broken parts including tightening with screw/nails other members of the side board complete and all as specified and shwon on drg. Shutter made out of prelaminated particle board exterior grade size of 357mm x 435mm x 18mm thick including 4 mm thick teak wood beading all around fixed with continuous piano type hinge 40mm wide. 134 (b) Drawers made out of prelaminated teak faced pre laminated particle board shown on drg. 135 (c) Aluminium anodized knob 25mm of best quality. 136 (d)Top / Bottom of side board made out of pre laminated particle board of 18mm. 137 (e) Sides of side board made out of prelaminated particle board of 18mm. 138 (f) Front and rear leg including long and side rail frame fabricated out of teak wood all as per shown on drg. 139 (g) Plywood 12mm thick commercial on back side of the side board. 140 Table Bed side FD-276Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table bed side complete and all as specified and shwon on drg. 18mm thick pre-laminated particle board side runner including legs of table with 4mm thick teak wood beading alround. 141 (a) 18mm thick pre-laminated particle board top side of the table made out of teak faced with 4mm thick teak wood beading alround.. 142 (b) 18mm thick pre-laminated particle board shelves with bottomself of the table made out of teak faced. 143 (c) Plywood 4mm thick commercial on back side of the table bed side . 144 Hat stand with Mirror FD-233(a) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw and other members of the Hat stand with mirror complete and all as specified and shown on drg. Mirror with new mirror 5 mm thick. 145 (b) Aluminium hook 146 (c) Edging 147 (d) Front side made out of 4 mm thick ISI marked one side teak face veneer plywood. 148 (e) Back made out of 6mm thick ISI markedPlywoodcommercial. 149 Notice BoardFD-99(a) Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame including finishing of wooden surfaces with french polish complete and of the following size.Notice board of size 1500 mm x 1200 mm 150 (b) Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame including finishing of wooden surfaces with french polish complete and of the following size.size 1800 mm x 1200 mm 151 (c) Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame including finishing of wooden surfaces with french polish complete and of the following size.Size 900 mm x 600 mm 152 (d) Removing the old u/s soft bd, baize green and wooden frame of notice bd and S&F the new baize green and soft bd, frame including finishing of wooden surfaces with french polish complete and of the following size.Size 1500 mm x 900 mm 153 (e) Removing old and broken glass of size 1500 mm x 1200 mmand Supply and fixing the new glass of selected quality, 5 mm thick including teak wood beading where required and langing clamp complet 154 (f) Removing old and broken glass of size 1500 mm x 1200 mmand Supply and fixing the new glass of selected quality, 5 mm thick including teak wood beading where required and langing clamp completSize 1800 mm x 1200 mm 155 (g) Removing old and broken glass of size 1500 mm x 1200 mmand Supply and fixing the new glass of selected quality, 5 mm thick including teak wood beading where required and langing clamp completSize 900 mm x 600 mm 156 (h) Removing old and broken glass of size 1500 mm x 1200 mmand Supply and fixing the new glass of selected quality, 5 mm thick including teak wood beading where required and langing clamp completSize 1500 mm x 900 mm 157 TV Trolley FD/E6/MAP/04(R )(a) Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the TV Trolley complete and all as specified and shown on drg. Replacement of side or bottom or top frame made out of pre-laminated particle board in existing TV Trolley after replacement of old UNSV side bottom and top frame 158 (b) Provision of aluminium anodized channel in exsting TV Trolley toslide the glass after taking out of UNSV Glass door. 159 (c) Replacement of Glass shutter in two pieces5 mm thick along with sliding wheel for smooth function of glass shutter drawers in existing TV Trolley as shown on Drawing and directed by Engtr-in-charge. 160 (d) Replacement of castor wheel of existing TV Trolleyas shown on drawing and directed by engr-in-charge. 161 Table Dressing Ladies with Mirror (MAP) FD/MAP/II/07Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and directed by Engr-in-Charge. Removing the existing unserviceable broken mirror and (a) S&F new mirror 5.5mm of thick size 1250x440mm all as specified and shown on drawings 162 (b) Removing the existing unserviceable frame of mirror and S&F new 1st class teak wood frame of size 45x35 mm and replace the worn out ply wood with 6mm plywood BWR Grade complete all as specified and shown on drawings 163 (c) Replacement of unserviceable shutter with suitable paino type hinges of existing size fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick. 164 (d) Replacement of old unserviceable plywood, 12mm thick, commercial on back side of the table complete. 165 (e) Replacement of old unserviceable ply wood 4mm thick back side ofthe mirror complete. 166 (f) Supply and fix new knobs shall be anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter complete. 167 (g) Replacement of old unserviceable top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete. 168 (h) Replacement of old unserviceable drawer with new drawer all as per drawing. 169 Dressing Mirror Gents (MAP) FD/E6/MAP/16(a)Removing old unserviceable parts and S & F new parts as size and shape including polishing complete all specified all shown on drawing. Mirror 5.5MM thick with back side ply and teak wood beading, make of Mirror modiguard / atul / swastik. 170 (b) Side runner made of 18MM thick pre laminated MDF board (exterior grade). 171 (c) TOP & bottom runner made of 18MM thick pre laminated MDF board (exterior grade). 172 (d) Back side ply 12MM thick BWR as per IS 303 (7 Ply). 173 (e) Glass shelf 4mm thick size as per existing. 174 (f) Preparation, cleaning & filling of knots, cracks and holes if any with mixture of wood powder & fevicol to old polished wooden surfaces of any description, width or girth and applying high gloss french polish to chair dinning exposed surfaces to view, when placed in position complete all as directed and specified in drawings.Sofa Set 3 Seater (FD-281/373/ FD/MAP-II/02) 175 (g) Sofa Set 4 Seater (FD-281/373/ FD/MAP-II/02) 176 (h) Sofa Set 5 Seater (FD-281/373/ FD/MAP-II/02) 177 (i) Chair Dining Long Back Cushioned (FD-357) 178 (j) Chair Easy cushioned (FD-358) 179 (k) Stool Dressing with cushioned (FD/E6/MAP/14) 180 (l) Chair dinning MAP Officer (FD/MAP-II/04 & FD/E6/MAP/10 (R)) 181 (m) Preparation of wood and wood based surfaces after removing stains through sand papering and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture:-Bed with plywood top (FD-246) 182 (n) Chair dining MAP JCOS/OR (FD/MAP-II/05) 183 (o) Chair WBB (FD-285) 184 (p) Hat stand with mirror (FD-233) 185 (q) Peg Table (FD-277) 186 (r) Table Bed side (FD-276) 187 (s) Table 3 x 2with and without drawer (FD-283 / 284) 188 (t) Table centre (FD-274) 189 (u) Table dining6/8 pers (FD-273) 190 (v) Table dressing gents with mirror (FD-379) 191 (w) Table dressing gents with mirror (FD/E6/MAP/16) 192 (x) Table writing (FD-275) 193 (y) Table dressing ladies with mirror (FD-378) 194 (z)Table dressing ladies with mirror MAP (FD/MAP/II/07) 195 (aa)Teapoy(FD-278) 196 (ab)Table Dining 1200 x 900mm (FD/MAP/II/03) 197 (ac) Side board (FD-371/372/1112) 198 (ad) Bin Linen Multipurpose (FD/E6/MAP/09) 199 (ae) TV Trolley (FD/E6/MAP/04(R)) 200 (af)Notice board all type (FD-99) 201 (ag) Chair dinning long back cushioned (FD-357) 202 (ah) Stool Dressing with cushioned (FD/E6/MAP/14)

INR 500 /-

INR 78000.0 /-

INR 39 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB