Tender For Supply Of Material/ Equipment For Development Of Distribution Infrastructure Work For Segregation Of Remaining 11 Kv Mixed Feeders Atjhunjhunu Circle( Lot-2) Of Ajmer Discom Of Rajasthan State Under Revamped Reforms-Based And Results-Linked, Di, ajmer-Rajasthan

Supply of material/ equipment for DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE work for Segregation of remaining 11 KV mixed feeders atJhunjhunu Circle( Lot-2) of Ajmer Discom of Rajasthan State under REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME (RDSS) on turnkey basis against TN-159 - Supply sheet of this XLS file attached herewith for reference regarding breakup of quanities as mentioned in Column 3. 2 Supply of PCC Poles 9 mtrs (200 Kg) 3 Supply of PCC Poles 9 mtrs (400 KG) 4 Supply of 36 Feet Long Lattice tower (Approx weight 449.65 Kg) (Galvanized) 5 Supply ofoutdoor 11 KV 630 Amp.O/D VCB KIOSK complete with accessories including use of special tools & conducting all pre commissioning tests before energisation, filling oil etc. complete in all respect with erection& grouting of structure 6 Supply of overhead steel cored aluminum ACSR Dog conductor 7 Supply of overhead steel cored aluminum ACSR Rabbit conductor. 8 Supply ofoverhead ABC(Aerial bunched cable)3Cx25+1x25 sqmm. 9 Supply ofoverhead ABC(Aerial bunched cable)1Cx25+1x25 sqmm. 10 Supply of 11 KV XLPE Insulated Armoured Cable size of3CoreX185 Sq. mm. 11 Supply of LT XLPE Armoured 4Cx70 sqmm 12 Supply of 11/0.4 KV SubStation structure set (Galvanized) onexisting poles in all respect with clamps as required made from M.S. channel 100x50 X6 mm, M.S. channel 75x40x6mm, M.S. angle 75x75x6 mm, M.S. Angle 50x50x6 mm , M.S. Angle 45x30x5 mm andM.S. flat 50x6 mm weight(284.36 kgs.) Approx 13 Supply of 11 KV Bay Channel Size of 75x40x6 [ 6 nos of 3750 mm ( Total size 22.5 mtr. = 6x3.75mtr) & 2 nos of 3400mm (Total size6.8 mtr. = 2 x 3.4mtr.)]& 100x50x6 [6 nos of 3750 mm (Total size 22.5 mtr. = 6 x 3.75 mtr)] Approx Weight424.30 Kgs.[(22.5mtr.+6.8mtr.) x 7.14 Kgs. Per mtr = 209.20 kgs.) + (22.5 mtr. x9.56 kgs. per mtr. = 215.1 kgs.) 14 Supply of 11 /0.4 KV 25 KVA Al woundconventional outdoor type (CSP type) distribution transformers 15 Supply of 11 /0.4 KV 63 KVA Al woundconventional outdoor type distribution transformers 16 Supply of11 KVdouble pole line structure set for cut point complete on existing poles in all respect with clamp, nut & bolts as requried made fromM.S.Channel 100 x 50x6 , M.S.Angle 65 x 65 x 6 mm, M.S.Angle 50 x 50 x 6 mm and M.S.Flat 50 x 6mm ( 101.383 Kg. Approx.)(Galvanized as per IS) 17 Supply of 11 KV V Cross arm with top hamper & clamps (galvanized as per IS), 0.2 m long made of MS Channel 100x50x6 mm,MS Angle 65x65x6 mm & MS flat of size 50x6 mm weight(12.789 Kg.) Approx. 18 Supply of 11KV with ( 9 x 24 KV Post Insulator)400 Amp. Double break without EB GO Isolator switch set (Air Break) (consisting of 3 limbs)including nut & bolts etc. 19 Supply of horn gap sets including hardware nut & bolt & washer etc. - 11KV ( with 6 x 24KV Post Insulator )1 Set=3 Nos 20 Supply of Single phase 11 KV Switch Fuse Unit comprising of 11 KV Single break tilting type switch with Post Insulator , Drop out fuse & fuse elementincluding nut, bolt & washers as required as per technical specifications, approved drawings and scope of work. 21 Supply ofSub-station type (9 KV 10 KA Station class) (1 set=3 No.) lightening arrestors on the existing brackets in all respect as required including hardware, nut , bolt &washers etc. For O&M works INCLUDING CONNECTION WITH EARTH BY 6 SWG GI WIRE AS REQUIRED AND JUMPERING ETC.,IN SEPARATEEARTH PIT 22 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 23 Stay Set 24 Strain/Guy Insulator 25 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 26 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 27 Supply ofGuarding brackets ( 1set = 2 Nos.)per span of 11 KV made of M.S. Angle 65X65X6 mm with clamps made of Flat 50x6, using Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (galvanized) 28 M.S. Angle (2x1.83 M),65X65X6mm, 10.614X2=21.228 Kg (Approx) (1set= 2 Nos) 29 Clamp of M S Flat 50x6 mmusing Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (1set= 2 Nos) (2.218*2= 4.436 Approx) 30 G I Wire 8 SWG,68 Mtr, 6.66 Kg 31 Supply of 11KV CT PT Set(200/5 Amp.) 32 Supply of LT Distribution piller Boxes of 400 Amps. Capacity. 33 Supply of 11KV XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE 34 Supply of 11KV XLPE 3X185 SQ.MM H.S.S.T. JOINT 35 Supply of 11 KV Polymer Composite Pin Insulator with pin 36 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 37 Supply of 11KV T & C Type 45 KN Hardware 38 Supply of 45 KN. porcelain disc.insulators for 11 KV (each unit consisting of 2 disc insulators & one B&S Type hardware)including all acessories etc. 39 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) as per latest specification and drawing adopted & approved by NIGAM. 40 Supply of set of 3 nos. of earthing rod sets for S/S made with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx. total length / weight, 50 m / 4.907 Kg.) 41 Supply ofM.S.Channel 100 x 50X6 (for cut point) 2 Nos. x 1.3 meter long with pilot patti 50 x 6 mm thick on single support/pole/lattice structure & necessary clamps, nut & bolts etc. (29.5Kg. Approx.).(Galvanized as per IS) 42 Supply of 6.35 / 0.24 KV substation structure for 10/16/25 KVA complete (galvanized as per IS) complete in all respect made of MS Channel, MS angle and MS flat etc., (36.054 kg approx.) 43 Supply of MIP meter box having dimension 1100x625x375 mm fabricated out of 1.6 mm thick MS sheet and MS Angle size 25x25x3 mm. The test terminal block(TTB) link type shall be provided by contractor in the meter box. 44 Supply of 8 SWG (4 mm dia) GI wire for continuous earthing of 11 KV Line hot dip (Galvanized) 45 Supply ofDistribution class (5 KA 9 KV Distribution class) lightening arrestorsincluding hardware, nut , bolt &washers etc. 46 Supply of Suspension (anchor) clamps for insulated or bare messenger +one pole bracket+1.5 meter S.S.(Stainless Steel) Strap+ two S.S. Buckles as per NFC standard suitable for AB cable complete in all respect (Galvanized as per IS) 47 Supply of dead end (anchor) clamps for insulated or bare messenger +one pole bracket+1.5 meter S.S.(Stainless Steel) Strap+ two S.S. Buckles as per NFC standard suitable for AB cable complete in all respect (Galvanized as per IS) 48 Supply of LT Insulation piercing connector (French standard) Type-A suitable for AB cable Complete in all respect. 49 Supply of Insulation piercing connector (French standard) Type-B suitable for AB cable Complete in all respect. 50 Supply of Clamp of M S Flat 50x6 mm(2x0.501m, wt. 2.36 Kg. Approx) 51 Supply of PG clamps (Rabbit to Rabbitl) 52 Supply of PG Clamps forDogConductor 53 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 54 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	07-07-2025	Due date Extension of TN-159	Date	10-07-2025

INR 29500 /-

INR 182.14 Crore /-