|
| 1 | Removal of spoil: Labour only for removal of spoil mixed with excavated earth, damaged tarfelt, damaged plaster, broken bricks, concrete rubbish and debris, broken glasses etc. from work site to a distance of 1.50 km. outside the factory. (20% deduction in measurement will be made from the volume of spoil ) all complete |
| 2 | Earth work in excavation : Labour only for earth work in excavation in foundation trenches,not exceeding 1.5 m wide and not exceeding 1.5 min depth getting out in hard or dense soil all complete. |
| 3 | Cutting Channels : Labour only for Cutting channels, grooves or rebatesexc 15 cm but n exc 30cm girth, and trimming surface all complete |
| 4 | Cutting of holes: M & L for cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise N exc 100 sq cm all complete |
| 5 | P.C.C. (1:2:4) : M & L for providing plain cement concrete type-B1, 1:2:4 mix (using 12.5 mm graded stone aggregate ) as in sub-base, filling and mass concrete, topping of floor all complete |
| 6 | R.C.C. (1:1.5:3) :M & L for providing reinforced cement concrete type M-20, 1:1.5:3 mix (using 20 mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all complete |
| 7 | Brick work(1:6): M & L for brick work with old size subclass\"b\" bricks, straight or curved on plan exc 6m mean radius with (1: 6) cement morter all complete.. |
| 8 | Form work : Use & waste of wooden form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter all complete |
| 9 | Wooden fillet work : S & F plain fillet square, rectangular or triangular in sections with 2nd class hardwood of sections exceeding 3 sq.cm and not exceeding 6 sq. cm area clean sawn, secured with nails or brads all complete |
| 10 | Wooden framed work : S & F wooden framed work with 2nd class hard wood (sal) plain, solid, straight frames, wrough,framed rebated on the solid, rounded orchamfered put together with glue, pinned at joints etc, complete in all respect. |
| 11 | Flush Door: M & L for flush shutters, solid core construction, with particle board core 30mm thickand plywood face panels, commercial type on both sides all complete |
| 12 | Tee Hinges :- S&F Mild steel tee hinges 150 mm long, stove enamelled black, medium type, and fixed in wooden doors all complete. |
| 13 | Butt Hinges : S & F 100 mm long butt hinges medium weight cold rolled mild steel and fixed all complete |
| 14 | Mild Steel Barrel Tower Bolt 300 mm long :S & F 300 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed all complete |
| 15 | Aluminium Tower Bolt 200 mm long :S & F 200 mm long alluminium anodised barrel tower bolts of extruded section and fixed all complete |
| 16 | AluminiumHandle : S & F 125 mm long extruded anodised aluminium handle fabricated typeand fixed all complete |
| 17 | Aluminium sliding door bolts: S & F 250 mm aluminium alloy,anodised,sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections or cast alluminium alloy and fixed,complete in all respect. |
| 18 | Door closer : S & F aluminium body door closer hydraulically regulated, designation no.2, universal type, godrej, neeta or garnish make suitable for door shutters of 701 to 850 mm in width and of wieght between 36 to 60 kg. and fixed all complete |
| 19 | Reinforcement : M & L for providing reinforcementwork with tmtmild steel bars 08 mm and over, cut to length, bent to shape required, including cranking, bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9 mm dia. etc.all complete. |
| 20 | Aluminium frame work for false ceiling: S & F for Anodised aluminium snap grid frame work for false ceiling all and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all complete. |
| 21 | Aluminium door shutter : S & F ofanodised aluminium door shutters, aluminium section weighing 0.55kg/mt including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos. in each door, hinges anodised aluminium snap beading, screws, etc. all complete |
| 22 | Aluminium framed work for partition wall: M & L for powder coated (of any colour) aluminiumwork of any type and thickness of door, sliding window frame and shutter, partition, xpm etc.of any size and section with one or more rebates including joining cleat for fixing and taper cleat to secure glass / lamination board and rubber gusket etc. complete |
| 23 | M.S. framed work: S & F for framed work of trussed, purlins, joists etc. or others made of mild steel angle, tee etc. of required sections including cutting, drilling, welding etc. as required complete in all respect. |
| 24 | Steel plates :S & F mild steel plates (plain or chequered) channels, square cut or notched ordinary and counter sunk with riveted, bolted or welded attachment all complete |
| 25 | M.S. small articles : S & F for providing mild steel straps, clamps, hold fasts etc, as small articles,to be fixed in position as required. |
| 26 | Prelaminated particle board : M & L for 12 mm thick Prelaminated particle board, exterior grade,prelaminated both sides with decorative choice laminations lamination & other side balancing white lamination,fixed with screws to timber frame work all complete |
| 27 | PerforatedBoard : S & F for 12 mm thick perforated particle board in ceiling fixed with screws any size, to be laid in snap grid of false ceilingall complete |
| 28 | Kota stone flooring : M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete. |
| 29 | Taking down plastering : Labour only for taking down cement or cement lime plaster of any description, flush pointing, any painting etc. from brick wall including raking out joints, hacking for key, scrubbing down with water etc. all complete. |
| 30 | Cement plaster(1:6): M & L for providing 12 mm thick cement plater 1:6 mixon fair faces of brick work or concrete surfaces at any height all as ordered |
| 31 | Bedding layer (1:4) :M & L for rendering average 20 mm thick cement plaster 1:4in screed bed over existing concrete surface, brick wall etc. of any description. |
| 32 | Washable distempering on wall :M & L for applying two coats of washable distemper of 1st quality make- Asian / Berger / ICIor substantially equivalent makeafter necessary preparatory workwithprimer to distempering of wall all complete |
| 33 | Sheet glass : M & L for providing sheel glass 4.8 mmthickness, exc. 05 sqm in each pane, any shape glazed with oil putty all complete. |
| 34 | Wood painting two coat : M & L for applying two coats of synthetic enamel paint finished glossy over a coat of primer after necessary preparation of wood surfaces of any description over 10 cm width or girth all complete |
| 35 | Steel painting two coat: M & L for applying two coats of synthetic enamel paint finished glossy of 1st quality; Make: Asian / Berger / ICI or substantially equivalent make,over a coat of priming with red lead primerafter necessary preparation of new decorated steel surfaces of any description over 10 cm width or girth all completed |
| 36 | Single brick flat soling : M & L for providing single brick flat soling with well burnt soling brick including filling of interstices with white sand all complete. |
| 37 | Dismantling of brick work: Dismantling brick work or stone/boulder masonry of any typebuilt in cement morter including all quoins, arches, pillars etc all complete. |
| 38 | Demolition of RCC : Labour only for demolition of reinforcedcement concrete of any description and in any position and removing the same out off the work site all complete. |
| 39 | Demolition of PCC: Labour only for demolition of cement concrete of any description and in any position and removing the same out off the work site all complete. |
| 40 | Dismantling steel work : Labour only for dismantling wrought iron or mild steel work of any description and in any position and removing the same to store all complete. |
| 41 | Removal of old wiring: Taking down carefully by unscrewing from boards / outlets boxes, fittings and fixtures such as switch socket,ceilling roses, lamp holders, brackets,ceilling fittings,regulators, related wiring,etc. and carrying to scrap area. |
| 42 | 25 sq mm armoured cable: Supply and layingon wall or girderof 1100V grade heavy duty cable with pvc insulated Al conductor served with an inner sheathing of pvc tape armoured with GI wire of Nicco / Gloster / Havells / Polycap or substatially equivalent make XLPE insulated stranded aluminium 3 1/2 core cable of size 25 sq. mm. |
| 43 | 10 sq mm armoured cable: Supply and layingon wall or girder of 1100V grade heavy duty cable with pvc insulated Al conductor served with an inner sheathing of pvc tape armoured with GI wire of Nicco / Gloster / Havells / Polycap or substatially equivalent make XLPE insulated stranded aluminium 4 core cable of size 10 sq. mm. |
| 44 | Single Door TPN DB 8 way:Supply and fixingand connecting complete of Siemens / Indo Asian /L&T / Schneider or substatially equivalent make sheet metal enclosure single door DB for fixing of one TPN MCB incoming and8 TP MCB outgoing with suitable rated busbar. |
| 45 | Single Door SP DB:Supply and fixingand connecting complete of Siemens / Indo Asian /L&T / Schneider or substatially equivalent make sheet metal enclosure single door DB for fixing of one TPN (4way) MCB incoming and12 single way outgoing (total 16 way) with suitable rated busbar orcopper lead. |
| 46 | MCB enclosure DP: Supply and fixingof Siemens / Legrand /Havells / Indo Asian or substantially equivalent makesheet metal enclosure DB suitable for fixing ofDPMCB along with earth connection pointall as ordered. |
| 47 | 40A DP MCB: Supply and fixing and connecting completed ofSiemens / Legrand /Havells / Indo Asian or substantially equivalant makeDP MCB / Isolator, upto 40A, 415V. |
| 48 | 63A TPN MCB: Supply and fixing and connecting completed ofSiemens / Legrand /Havells / Indo Asian or substantially equivalant make63A TPN MCB/ Isolator, 415V. |
| 49 | 40A SP MCB/Isolator: Supply and fixing and connecting completed of Siemens / Indo Asian /L&T / Schneider or substatially equivalent make SP MCB /Isolator, upto 40A,230V. |
| 50 | 40A TP MCB/Isolator: Supply and fixing and connecting completed of Siemens / Indo Asian /L&T / Schneider or substatially equivalent make TP MCB /Isolator, upto 40A,415V. |
| 51 | Ceilling rose: Supply, fixing and connecting completedAnchor / Rider / Havells / V-Guard or substatially equivalant make celling rose of pvc/polycarbonate isolated body suitable for 230V AC supply. |
| 52 | 2.5 sqmm Cu sub main: Supply and fixing of FRtype Finolex / Havells / Polycap or substantially equivalant make2 x (2.5 sq mm single core multistrand PVCinsulated copper wire) alongwith same make 1 x (2.5 sq mm single core multistrandcopper earth wire) alongwith PVC conduit for sub main. |
| 53 | 6A piano switch: Supply and fixing and connecting completed of Anchor / SSK / Standard / Havells / Pritam or substantially equivalent make 6 Amps piano switchflush type, single pole one way. |
| 54 | 6A socket outlet: Supply and fixing and connecting completed of Anchor / SSK / Standard / Havells / Pritam or substantially equivalent make 6 Amps socket outlet 3/5 pin flush type, single phase. |
| 55 | Point wiring: M & L for point wiring of one light point or one plug point or one fan point controlled by one switch withFinolex / Havells / HPL / Polycab or substantially equivalant make pvc insulatedmultistrand copper conductor of 1.5 sqmm in pvc casing caping with same makeinsulated 1 sq mm copper earth wire. |
| 56 | Same board point wiring: M & L for point wiring of one 3 pin plug point 5 amps on the same board with other switcheswith 1.5 sqmm FR typeFinolex / Havells / Polycap or substantially equivalentPVC insulated mutistrand copper wire alongwith same make1 sq mmcopper earth wire. |
| 57 | 150X100X60mmGI switch board: Supply and fixing & connecting complete GIsheet metal box of suitable thickness and size 150X100X60 mm withbakelite top cover. |
| 58 | 300x200x60mm GI switch board: Supply, fixing & connecting complete GIsheet metal box of suitable thickness and size 300X200X60 mm with bakelite top cover 3mm thickness. |
| 59 | Kit kat fuse: Supply,fixing and connecting complete of one 15A flush type modular type fuse to be fixed oncover plate with other switches and socket. |
| 60 | Cable termination: M / Labourfor cable end terminal joints any type complete suitable forpvcinsulated4 core armoured aluminium conductor cable upto 25 sq. mm size. |
| 61 | Double T/L fitting with light: Supply and fixing ofPhilips / Bajaj / Havells / Crompton or substantially equivalent make LED compact batten CRCA sheet steel powder coated, pre-wired rotor type lamp holder for G13 socket, with double LED T/L,colour temp. 6000K, 2x18W LED inbuilt electronic driver, including all fixing accessories. |
| 62 | 2ft x 2ft LED Recess light fittings: Supply and fixing ofPhilips / Bajaj / Havells / Crompton or substantially equivalent make 36W LED recess mount ceiling light fitting, CRCA sheet steel powder coated, pre-wired, colour temp. 6000K(+/-10%), inbuilt electronic driver, defused cover including all fixing accessories. |
| 63 | Split type ductable dehumidifier unit: Split type ductable dehumidifier unit, capacity 5.5 TR, 3ph, 50Hz, 415V Scroll Compressor, copper coil, Eco Friendly Refrigerant of Carrier/Hitachi/Daikin/Blue Star/ Lloyd or substatially equivalnt make including installation and commissioning with all required accessories. |
| 64 | 90W bracket fittings: Supply & fixingwith all accessoriesof Philips / Bajaj / Havells / Suryaor substantially equivalent make LED light fittings system wattage 90W, die- cast Al. housing with power coated, IP65 LED, module LED chip lens, colour temp. 6000K(+/-10%), system efficacy>/=80 LM/W, in-built elecronic driver, PF>/=0.9, THD |
| 65 | Exhaust fan: Supply & fixingexhaust fan ( including cutting of holes to wall and finishing of surfaces) Bajaj/Crompton/Khaitan/Havells or substantially equivalant make ofrating single phase, 230VAC, 900rpm(+/-10%), 450 mm sweep, with louvre to be mounted on wall or frame work |
