}

Tender For Construction Of Anganavadi No:70 Ward 5, neendoor-Kerala

Local Self Government Department has published Tender For Construction Of Anganavadi No:70 Ward 5. Submission Date for this Tender is 05-07-2025. Construction Material Tenders in neendoor Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

49904137
Tender For Construction Of Anganavadi No:70 Ward 5
Tender
Indian
Kerala
Neendoor
05-07-2025

Tender Documents

Tender Details

CONSTRUCTION OF ANGANAVADI NO:70 WARD 5 - 1 Stone Aggregate(single size): 40 mm nominal size 2 Stone Aggregate(single size):20 mm nominal size 3 Coarse sand (zone III) 4 Portland Cement 5 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 6 Vibrator (Needle type 40 mm) 7 Sundries 8 Stone for masonry work 9 Stone Aggregate(single size): 10 mm nominal size 10 Structural steel such as tees, angles, channels and R.S. joists 11 Red oxide Zinc chromate primer 12 Adjustable telescopic prop 3 m (2.02-3.75m) 13 Beam clamp 300-380 mm (450-1070 mm) 14 Solid blocks of size 30x20x15cm 15 Twisted steel/deformed bars 16 Adjustable span ESO+SI (2.35-3.40) 17 Second class kail wood in planks 18 Second class kail wood in scantling 19 Hollock ballies 125 mm diameter 20 Anjili wood scantls 21 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 22 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 23 Bright finished or black enameled mild steel screws 40 mm 24 Bright finished or black enameled mild steel screws 20 mm 25 Anjili wood planks 26 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 27 Mild Steel round bar above 12 mm dia 28 Flats up to 10 mm in thickness 29 Oxidised mild steel tower bolt (barrel type) 200x10 mm 30 Oxidised mild steel screws 30 mm 31 200 mm Aluminium aldrop 32 Iron hooks & eyes 100 mm 33 Anodised Aluminium hanging type door stopper 34 Chromium plated Brass screws 25 mm 35 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 36 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 37 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 38 Fine sand (zone IV) 39 Vitrified floor tile 60x60 cm 40 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 41 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 42 Synthetic enamel paint in black or chocolate shade 43 Vitreous China orrisa type w.c. pan size 580 mm 44 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 45 100 mm S.C.I. trap with vent heel 46 Vitreous China flat back wash basin 630x450 mm 47 15 mm C.P.brass tap 48 C.P. brass waste 32 mm 49 C.I. bracket for wash basin and sinks 50 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 51 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 52 PTMT - Towel Rail (600 mm) 53 Second class teak wood in scantling 54 PVC pipe 32 mm outer dia 6Kgf/cm2 55 PVC pipe 63 mm outer dia. 4 kgf/cm2 56 PVC pipe 110 mm outer dia 6kgf/cm2 57 PVC Elbow 63 mm dia 58 PVC door Elbow 63 mm dia 59 PVC bend 63 mm dia 60 PVC Tee 63x63x63 mm dia 61 PVC door Tee 63 x63x63mm dia 62 PVC vent cowl 63 mm dia 63 PVC end cap 63 mm dia 64 PVC Socket/coupling 63 mm dia 65 PVC Elbow 110 mm dia 66 PVC 45 degree Elbow 110 mm dia 67 PVC door Elbow 110 mm dia 68 PVC bend 110 mm dia 69 PVC door Tee 110x110x75 mm dia 70 PVC end cap 110 mm dia 71 PVC Socket/coupling 110 mm dia 72 PVC Reducer 110x75 mm dia 73 Brass bib-cock-15 mm dia 74 Brass stop-cock 15 mm dia 75 Polyethylene water storage tank with cover and suitable locking arrangemnet 76 PTMT - Soap Dish/Holder 138x102x75 mm 77 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 78 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile 79 Mild steel round bar 12 mm dia and below 80 Welding by electric plant 81 Mild steel tubes hot finished welded type

Key Value

Document Fees
INR 2015 /-
EMD
INR 22855.0 /-
Tender Value
INR 9.14 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail