}

Tender For Bt Road Work From A Block To Nine Coaching In Ward No.- 140. - Providing And Applying Tack Coat On The Prepared Surface With Bitumen Emulsion As Per Is: 8887 And Approved Quality @ 0.2 Kg/Sqm With The Help Of Spray Set Fitted On Bitumen Contain, jaipur-Rajasthan

Department Of Local Bodies has published Tender For Bt Road Work From A Block To Nine Coaching In Ward No.- 140. - Providing And Applying Tack Coat On The Prepared Surface With Bitumen Emulsion As Per Is: 8887 And Approved Quality @ 0.2 Kg/Sqm With The Help Of Spray Set Fitted On Bitumen Contain. Submission Date for this Tender is 07-07-2025. Road Work Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

49897091
Tender For Bt Road Work From A Block To Nine Coaching In Ward No.- 140. - Providing And Applying Tack Coat On The Prepared Surface With Bitumen Emulsion As Per Is: 8887 And Approved Quality @ 0.2 Kg/Sqm With The Help Of Spray Set Fitted On Bitumen Contain
Tender
Indian
Rajasthan
Jaipur
07-07-2025

Tender Documents

Tender Details

Tender For Bt Road Work From A Block To Nine Coaching In Ward No.- 140. - Providing and applying tack coat on the prepared surface with bitumen emulsion as per IS: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, 2 (8.8.5) Providing and laying 50-75 mm compacted thick design mix (approved by Engineer) Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per Table 500-9, 500-10 with bitumen binder set (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required) for base/ binder course including loading of material with F.E. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of MoRT&H specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.Grade-II with Bitumen VG-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) tonne 3 (8.10.4) Providing and laying 30-45 mm compacted thickness Bituminous Concrete as per design mix (approved by Engineer) on prepared surface with specified grade stone aggregate as per Table - 500-18 with bitumen for wearing course including loading of aggregate with F.E. loader and hot mixing of stone aggregate and bitumen (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa, to achieve the desired density complete as per clause 509 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. 4 (10.8) Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, 5 (3785) Single Molded twin Shank Cats eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens shall support a load of 16000 kg complying to Specifications of Category A of MORTH The height, width and length shall not exceed 50 mm, 100 mm and 100 mm 6 (17.80.1) Supplying & fixing 560mm dia opening SFRC manhole frame & cover as per IS : 12592-2002 in existing manholes including grouting the frame in PCC M-15 complete in all respect as directed by the Engineer HD-20

Key Value

Document Fees
INR 500 /-
EMD
INR 9460.0 /-
Tender Value
INR 4.73 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail