|
| 1 | Schedule \"A\" Section - I |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 5 | Taking down shutters of any description n exc 1 sqmfrom chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply and fixing 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 7 | Supply and fixing 105x60mm pressed steel frames 1.25mm thickfor doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, Peg etc complete all as specified . |
| 8 | Material and labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge. |
| 9 | Supply and fixing factory made Flush shutters 30 to 35mm thick for door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side.Note:- Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 10 | Supply and fixing factory made 2nd class hard wood 35mm thick made glazed and skeleton shuttersopen rebated and prepared to receive glass, gauze,etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed.Note:- Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 11 | Supply and fixing 2nd class factory madehard wood 30mm thick made glazed and skeleton shuttersopen rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. Note:- Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 12 | Supply and fixing factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tubeas per specification complete all as specified and directed by Engr-in-charge. |
| 13 | Supply and fixing factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement forstyleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top railsand bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing complete all as specified Note:- Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 14 | Supply and fixing Factory made box type steel window with side hung shutters (glazing) with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars, including flat iron 50 x 6 mm for cover gaps and flat iron 12 x 3 mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. Note : Glass/Wire mesh required for fixing in window will be measured and paid for separately Note:- Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 15 | -Ditto-as item no 13.00but Gauged shutter without glazing bars. |
| 16 | Supply and fixing Factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.Note : (1) Glass/Wire mesh required for fixing in ventilator will be measured and paid for separately. (2)Contractor shall submit purchase voucher and manufacturing certificate to Engr-in-Charge before claiming payment. No payment shall be permisiable without submitting purchase voucher and NTC. |
| 17 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 18 | Supply and fixing Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frames with extruded built up standard tubular sections/ appropriate Z sections and other sections (Size as directed) of approved make conforming to IS: 733 and IS:1285, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 19 | Supply and fixing powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 20 | Supply and fixing for Sheet glass ordinary quality 4.8 to 5 mm thick exc 0.50 sqm each pan complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section, all complete as per requirement and direction of Engineerin- charge.Note: For item include the Aluminium Grill be fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete. |
| 22 | Supply andfixing in repairs mortice lock mild steel, vertical type, 4 levers, size 100 mm suitable for aluminum doors complete all as specified |
| 23 | Supply and fixing for 9 mm thick Pre laminated interior grade, ISI marked, both side laminated board in repairs, complete all as specified |
| 24 | Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed. |
| 25 | Supply and fixing in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsexc 1.50 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading, any type) in squares n.exc. 0.5 sqm in each pane complete all as specified anddirected by Engineer-in-Charge. |
| 29 | All as per serial item No - 27.00 here in before but 4 mmthick in squares exc.0.5 sqm in each pane-ditto- |
| 30 | Supply and fixing Figured glass thickness 4 mm, pin hea type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 31 | Supply and fixing 300 mm size MS door spring including roller and roller plate by means of welding complete all as directed by Engineer-in-Charge |
| 32 | ditto as Item No. 30.00 above but in repairs |
| 33 | Supply and fixing Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified & directed. |
| 34 | Supply and fixing Mild steel butt hinges medium weight, cold rolled, 75mm, ISI marked, complete all as specified and directed . |
| 35 | Supply and fixing Mild steel butt hinges medium weight, cold rolled, 50mm, ISI marked, complete all as specified and directed . |
| 36 | Supply and fixing barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 37 | Supply and fixing barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 38 | Supply and fixing barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. |
| 39 | Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 40 | Supply and fixing aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed. |
| 41 | Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed. |
| 42 | ditto as Item No. 40.00 above but in repairs |
| 43 | Supply and fixing Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 100 mm size as in repairs, complete all as specified & directed. |
| 44 | Supply and fixing double leagedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified |
| 45 | Ditto as per Item No. 43.00 above but fixed in repair |
| 46 | Door seal strip with plastic beading, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material and labourpreparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of wood primer. |
| 48 | Material and labour forpreparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paintover a coat of red oxide primer all as specified. |
| 49 | Material and labour for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed. |
| 50 | Supply and fixing Stainless steel 20 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed. |
| 51 | Supply andfixing in repairs aluminium (Die cast) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 52 | Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steelheavy duty and fixed. |
| 53 | Supply and fixing for Prelaminated Medium density fibre board 18/19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed to timber framework with screws as in walls panelling, almirah, kitchen cabinates etc, fixed in repair, complete all as specified and directed by Engineer-in-charge. |
| 54 | Material and labour for external teak wood lipping (decorative), 6mm thick of block board or veneered particle board/MDF fixed with nails. |
| 55 | Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair includingtaking out the existing complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing magnetic catches 75mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing 40mm dia cupboard knob of brass, polished,fixed with nut screw and washer, fixed as in repairscomplete all as specified and directedby Engineer-in-Charge. |
| 58 | Supply andfixing of mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including dismantling old iron/mild steel work complete all as specified and as directed. |
| 59 | Material and labour for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) and incl dismantling old floor tiles with bed, complete all as specified and directed by Engr-In- Charge. |
| 60 | Material and labour for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 and incl dismantling old wall tiles with bed,complete all as specified and directed by Engr-In- Charge. |
| 61 | Material and labour Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished ceramic tiles (coloured/dark shade /double charged/ultrachaged) area of each tile exc. 0.42 sqm but n. exc. 1 sqm as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) and incl dismantling old floor tiles with bed, complete all as spd & as directed.NOTE:- Clour and shade shall be finalized by the GE and User. |
| 62 | Material and labour machine cut Granite slab 18-20 mm thick as in steps, pillars,window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing, polshing and dismantling old granite with bed, complete all as spd. |
| 63 | Material and labour for Rounding to edges of stone slabs any thick as in in steps, jambs, pillars, cokking plateforms and likes complete all as specified |
| 64 | Material and labour for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and Screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone and dismantling old granite with bed, complete all as specified and directed. |
| 65 | Material and labour for 20 mm black/white/green marble stone, laid over cement screed bed 20 mm thick as like over shelves, floors etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thickcement screed bed in CM(1:6) incl cutting, waste, rubbing, mirror polshing and dismantling old marble with bedetc complete all as spd complete all as specified. |
| 66 | Material and labour for Mirror/diamond polishing with rubbing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.Note:- For items Granite, Kota stone & Marble (i) The rate of stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and stone polishing to achieve the desired stone finish all as spfd. |
| 67 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 68 | Material and labour for French polishing onsurfaces of any description,width or girth includingcleaning and preparing thesurface including a coat ofwood filler one or more coats on old work complete all as specified anddirected. |
| 69 | Demolition ofcement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 70 | Material & Labour for 75mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item. |
| 71 | Material & Labour brick work with sub class \"B\" bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 and incl dismantling of old brick work, complete all as specified & directed. |
| 72 | Same as item No 70.00 above but except bricks all as specified. |
| 73 | Material and labour for Rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shadesetc. in CM 1:4 finished even and fair without using extra cement and using water proofing compound (2% 0f cement content)incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 74 | Supply only Integral waterproofing compoundall as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 75 | Material and labour for preparation of new plastered or unplastered surfaces of walls incl cornices, chajjas, sun shadesetc. and applying two coat of cement base paint, complete all as specified. |
| 76 | Material and labour for Rendering 10mm thick on surface of any description of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces) and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 77 | Material and labour forfor applying3 mm thick (achieved in two coats) wall careputty of new undecorated plastered surfaces of wallcomplete all as specified and directed |
| 78 | Material and labour preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) on wall surfaces over a coat of primer complete all as specified and directed by Engr-In- Charge. |
| 79 | Material and labour for Rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 80 | Material and labour for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roof, landings, balconies, deck slabs and in shelves and the like including demolition removal the rubbish/ demolished material outside defence land,andcomplete all as specified and directed. |
| 81 | Material and labour MS TMT Bars 8mm/10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 82 | Amount of credit of Rs. 77799.00 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
