|
| 1 | Schedule \"A\" Section - I |
| 2 | Material and labour for Rendering 15mm thick on fair faces of old brick/stone or concrete surfaces at any height incl walls, cornices etc. in CM 1:4 finished even and smooth without using extra cement (External surface) & curing and incl taking down old plaster, complete all as specified and directed by Engr-In- Charge. |
| 3 | Material and labour for Rendering 15mm thick on fair faces of old brick/stone or concrete surfaces at any height incl Pillars, cornices, chajjas (top & facia sides), sun shades etc making sharp corners in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) & curing and incl taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 4 | Material and labour rendeing 10mm thick other then fair faces surfaces in CM 1:6 finished even and smooth with out using extra cement(Internal surfaces) incl proper curing and incl taking down old plaster complete. |
| 5 | Material and labour rendering 5mm thick on ceiling surface in CM 1:3 finished even and smooth and incl taking down old plaster complete all as specified and directed. |
| 6 | Material and labour forfor applying 3 mm thick wall careputty (applied in two layers) of old /new decorated plastered or unplasteredsurfaces of wallcomplete all as specified and directed |
| 7 | Material and labour preparatin of new / previously untreated surface & applying two coats of oil bound distemper (OBD) over one coat of chalk white on wall surface,complete allas specified and directed |
| 8 | Material and labour for preparation of plastered or unplastered new decorated surfaces of walls incl cornices, chajjas, sun shadesetc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) complete all as specified. |
| 9 | Material and labour for preparation of old surfaces of wall and and applying two coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE) complete all as specified. Note:- Paint and primer shall be 1st quality. |
| 10 | Material and labour for preparation of plastered or unplastered new decorated surfaces of ceiling etc. incl clening washing etc. and applyingthree coat of white lime wash complete all as specified. |
| 11 | Supply only water proofing compouond all as specified as per manfacture instruction complete all as specified and directed by Engr-In- Charge. |
| 12 | Preparation of old surfaces of walls including complete removal by brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of colour wash, complete all as specified and directed by Engineer –in-Charge. |
| 13 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. |
| 14 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of white lime wash complete all as specified. |
| 15 | All as per above Srl item No 13.00 here-in –beforebut one coat of lime wash on ceiling, |
| 16 | All as per above Srl item No 13.00 here-in –beforebut two coat of lime wash on ceiling, |
| 17 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shadesetc. and applying one coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) including sand paper or iron patti / flat complete all as specified. |
| 18 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl cornices, chajjas, sun shadesetc. and applying two coat of cement base paint with and incl curing the surfaces and curing the same after application of cement base paint (tint as approved by GE) complete all as specified. |
| 19 | Material and labour for preparation of old decorated plastered surfaces of walls by rubbing down, washing & stopping of distempered surfaces using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-charge. |
| 20 | Material and labour for complete removal of existing treatment from internal surfaces on walls by wire brushes, sand paper and iron patti / flat & stopping of surfaces & leveling/ edging the disturbed places/edges and applyingcompound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali-resistant primer, complete all as specified and directed by the Engineer-in-Charge. |
| 21 | Material & labour for preparation of old paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 22 | Material & labour for preparation of new paintedwood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified & directed. |
| 23 | Material & labour for preparation of old paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 24 | Material & labour for preparation of new paintedsteel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified & directed. |
| 25 | Material and labour including preparing oldroof covering steel surfaces (Plain/ corrugated roof sheets) of any type of treatmentsurfacesincl washing and cleaning etc. to steel and iron surfaces and applying one coats of synthetic enamel roof paint, complete all as specified. |
| 26 | Material & labour for preparation of old paintedwood based weather boarding/ plywood/ AC board as in ceiling surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 27 | Material and labour for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stopingthe connected previously treated surfaces and applying one coat of acrylic emulsion exterior/interior quality (Apex painting) (tint as approved by GE) complete all as specified. |
| 28 | Material & labour for preparation of old brick & concrete surfaces as in floors, walls etc of any description not otherwise described over 10 cm width or girth and applying two coat of plastic emulsion paint, complete all as specified & directed. |
| 29 | Material and labour Writing letters or figures on any wall surface (Block. Roman, Italic or Indian) n exc. 30 cm high, painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks complete all as specified and directed by Engr-in-Chrge. |
| 30 | Material and labour Stops, commas, short lines, dashes, hyphens, brackets, etc. marked between any letters or figures on any surface complete. |
