|
| 1 | M&L for excavation over area, n exc 1.5 in depth, and getting out in Soft/Loose soil, complete all as specified and directed. |
| 2 | Excavation in trenches, n exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying cable / pipe etc n exc 10sqm on plan, and getting out in Soft/Loose soil, complete all as specified and directed. |
| 3 | Excavation in trenches, n exc 1.5m wide and exc 1.5m and n exc 3.0m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying cable / pipe etc n exc 10sqm on plan, and getting out in Soft/Loose soil, complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm for soft/loose soil complete all as directed. |
| 5 | Removing excavated material (soils) n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 6 | Rolling and consolidation of formation of surfaces in cutting with power roller of 8 to 12 tonne capacity power rollerincluding filling up depression which occur during rolling complete. |
| 7 | Material & labour for Soling (or sub base) with broken boulders or quarried stone of size 100 to 50mm (granite, trap or Basalt), interstices filled, surface formed and rolled and consolidated to required gradient and camber in spread thickness 150mm and rolled with power roller exc 8 tonne & n. exc 12 tonne capacity complete all as specified and as directed. |
| 8 | M & L for laying and compacting 150 mm thick (compacted thickness) WMM laid in two layers of 75 mm each grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded agregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. Note: The finished surface tolerances to be as per Table 900-1 of MoRTH specification for Road and Bridge works 2013. |
| 9 | Material and labour for 10 mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over WMM layer complete all as specified and direced. Note: No additional amount to be paid for overlap. |
| 10 | Supplying and laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm complete all as specified and direced. |
| 11 | M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, etc completed all as specified and directed. |
| 12 | Supply onlypolyester triangular synthetic fibres 6/12mm long with circum circle diameter 30-35 micron desgined formelting point 240 -260degree celsius having specific gravity 1.34 to 1.4 Recron 3S manufactured by M/s Reliance Industries Ltd Mumbai or M/s Finolex Industires Ltd or equivalent as secondary reinfocement in all type of concrete @0.25% by weight of cement (@1.0 Kg per cum of PQC) complete all as specified and directed. |
| 13 | Finishing top concrete pavement by brooming while concrete is green complete all as specified and directed. |
| 14 | M & L for forming 20 mm wide and 200mm depth expansion Joint the said joint will be filled with 12 mm thick and 155 mm deep with polymer based filler board (Dura Board HD-10) above the polymer filler Board apply bond with breaker tape and above the breaker tape polyrethane backup rod of 25mm dia will be provided, remaing 20mm deep joint will be filled with polyunethane sealent conforming to BS-5212.The bottom width and vertical edges shall be primed with Two (02) coats of polyurethene sealent.The sealent should have minimum movent accomodation factor of (+ 30%) and care shall be taken that polyurathene sealent do not get spill out of the joint complete all as specified and directed. |
| 15 | M & L for forming 10mm thick and 65mm deep (dummy) joints.The said joints will be completely filled with polyurethane sealent compound conforming to BS-5212, BS-4254 and EN-141875-2003 for hydorlysis/water resistance test will be carried out.Bottom and vertical edges shall be primed with Two (02) coats of polyrethen sealent.The sealent should have minimum movement accommodation factor of (+ 30%) and care shall be taken that polyurethene sealent do not get spill out of the joint complete all as specified and directed. |
| 16 | M & L for forming 10mm thick and 30mm deep construction joint the said joiint will be completely filled with polyurethane sealent compound conforming to BS-5212, BS-4254 and EN-141875-2003 for Hydorlysis/water resistence test will be carried out.Bottom and vertaical edges shall be primed with 02 (two) coats of polyurethene sealent.The sealent should have minimum solvent accommodation factor of (+ 30%) and care shall be taken that polyurethene sealent do not get spill out of the joint complete all as specified and directed. |
| 17 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 18 | S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and including MS stud of suitable size as per manufacturer\"s instructions complete all as specified and directed.Note: Model No. DA-972 of Dark eye or equivalent. |
| 19 | S&F solar cat eye aluminum alloy (100% water proof design according to IP65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono-crystalline solar panel 2.4V/ 0.3 watt, one Ni-Cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer\"s instructions. |
| 20 | S&F metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, removal of existing delineator, complete all as specified and directed.Make: Greenlite or Dark eye. |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 22 | M&L for preparation ofnew concretesurface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat primer complete all as specified and as directed. |
| 23 | M&L for Hard core of gauge n.exc 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone or boulders complete all as specified and as directed. |
| 24 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc complete all as specified and as directed. |
| 25 | M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 26 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade,with grey cement and pigmentcomplete all as specified and directed. |
| 27 | S&F Rubber speed breaker made from heavy duty tough rubber and polyethylene with high resistance wear & tear property. Best suitable height of 3\" (75mm)for speed Restriction UVstabilized colours in black & Yellow combination. High reflective mark showing arrows in white colour are marked on both sides of yellow & black bumps. The two bumps Yellow & Black are both having end caps of contrast with two holes.The size of breaker is 375x50x500 with four holes. The whole breaker is fixed along with epoxy & hardener and Bolts.Supply with epoxy and hardner as required of company (DA-1008) complete all as specified and directed.Make: Sinor,3M and Equivalent. |
| 28 | S&F road sign boards as following :-(i) Stainless Steel (Grade 316) hollow circular section (50 mm dia of height 3650 mm), medium weight as in posts and strus for sign boards including tops to shape as directed drilling holes in PCC 1:2:4 of size 0.45 x 0.45 x 0.75 , etc complete.(ii) Stainless steel plain sheets 1mm thick as in sign board and similar work cut to size, marking holes punched included round hearted screw or rivets and fixed to stainless steel framing with plain 40mm lap joints with revited or welded seams, including bending or turning up mitred angles etc as required completed.(iii) Coloured luminous acrylic PVC film (sheet) self adhesive of blue colour on stainless steel surfaces of boards etc complete.(iv) Coloured luminous acrylic PVC strip, logo letters or figures (Block, Roman, italic or Indian) with coloured luminous acrylic PVC film self adhesive, fixed on boards etc complete all as specified and directed. |
| 29 | S&F Convex Mirror 800 mm made of PC material provided with suitable MS pipe post, duly painted as per site requirement, have clear & definite mirror image having 130 degree of viewing angle. It is unbreakable & stronger than glass all as specified and as directed.Note:- Inluding POST HOLE & PCC size of 0.45m x 0.45m x 0.60m |
| 30 | Supply and fixing steel tubular swaged poles type 410SP-31, 9.0m long, swan neck type complete with CI base plate and finial and single swan neck, including foundation and coping complete all as specified and directed. |
| 31 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, impact and corrosion resistant including thermal management in multiple optics with IP 66 protection, fixing on existing brackets complete all as specified and directed. |
| 32 | Supply, laying 16 sqmm 4 core cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor , connecting with proper size Aluminium lugs, glands wherever necessary near LT Panels / Bus bar chamber panel / Street light boxes all as per site requirement , testingcomplete all as specified and directed. |
| 33 | S&F FRP based outdoor type Junction box pole Hinged (L) mounted with clamps and including MCB SP, 6 Amps complete all as specified and as directed. Make: Sintex Model No. GS JB 2817. |
| 34 | S&F PVC flat twin core, 1.5 Sqmm cablecomplete all as specified and directed. |
| 35 | M&L 50mm bore galavanised steel tubes, light grade, with all fitting & fixure on pole for cable protection complete all as specified and directed. |
| 36 | S&F in repairs MCCB 4 pole 63 Amps with breaking capacity 16kA ,adjustable type 415 volts AC Supply complete all as specified and directed. |
| 37 | S & F double wall corrugated pipe class SN4, 50mm dia includiong laying in trenches or in walls complete all as specified and directed. |
| 38 | M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) for foundation bed of poles etc complete all as specified and directed. |
| 39 | M&L for cement concrete Type C1 1:3:6 (20 mm graded aggregate) in foundation filling and coping of poles and in packing around interlocking paver blocks, bed plates etc complete all as specified and directed. |
| 40 | M&L for galavanised steel tubes light grade of size 15mm dia complete all as specified and directed. |
| 41 | M&L for galavanised steel tubes light grade of size 40mm dia complete all as specified and directed. |
