|
| 1 | Taking out old existing unserviceable damaged gate shutter of canal/river completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or as directed by the Engineer in charge upto a lead of 1000 m. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, welding rod, hire charges of machineries, like chain pulley block, gas set, grinding machine, welding set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading. The cost of complete dismantling of hoisting system & cost of old unserviceable materials handed over to departmental godown including loading & unloading will be provided extra..b) Gate shuteer size above 4.00sqm upto8.00 sq.m |
| 2 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 -2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).ii) Width of Gate shuteer size above 2 metre |
| 3 | Dismentling rope drum hoisting system completely of Dam/Barrage gate, consisting of geared motor/motor, gear box, manual operating system, chain & sprocket, couplings, braking arrangement, power transmission shafts, spur gears, rope drum, rope, rope clamps, trunion etc part by part for repairing/replacement of gates and staking suitable place upto lead of 500 metre or as per direction of E.I.C.The cost includes cost of man power employed for dismantling of hoisting system, hire charges of mechanical devices for hanging the gate properly for repairing works, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading.Width of Gate shuteer size upto 12 metre |
| 4 | Labour charges of dismantling the shed of corrugated sheet above the each gate including dismantling the beams, cross arm etc. without damaging any of the above for properly lifting the draw shutter for repairing and painting work and after completion of the repairing & painting work refitting the same dismantled materials in its original position including all petty materials,hire charges of tools&tackles,scaffolding,leak proof items etc up to the satisfaction of EIC. |
| 5 | Fitting fixing of rope drum hoisting system completely of Dam/Barrage gate, consisting of geared motor/motor, gear box, manual operating system, chain & sprocket, couplings, braking arrangement, power transmission shafts, spur gears, rope drum, rope, rope clamps, trunion etc part by part completely for trial run of gate as per direction of E.I.C.The cost includes cost of man power employed for fitting fixing of hoisting system,hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading, including cost of trial run but excluding supply of spares mentioned ealier.Width of Gate shuteer size upto 12 metre |
| 6 | Repairing/replacement/strengthening of damaged/heavily corrodeded portion of cross/horizontal/ vertical steel members, chequered plate, stair case, hand railing etc. of MS hoist tresstle bridge, catwalk/walkway bridge and other similar MS structure on dam/barrage and canal/rivers which includes dismantling of damaged portion of structural members and fabrication and finishing to the required shape & size as per direction. The Cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). |
| 7 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required completea) Depth of excavation not exceeding 1,500 mm |
| 8 | Ordinary Cement concrete (mix 1:1,5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 9 | Supply of bearing Bearing no 6216(SKF) |
| 10 | Oiling greasing of hoisting gear boxes (for rope drum and chain hoist) of regulator gates of canal/rivers by cleaning, checking, greasing /lubricating the gears, plummer bocks, bearings, manual drive etc including all charges of man & materials which include oiling, greasing, refilling of gear oil excluding supply of gear oil and grease and fixing of damaged oil seals & missing nut & bolts etc complete as per direction of EIC. ( Gear oil & Grease provided extra.) |
| 11 | Supply of Gear oil as per direction of Engineer in charge |
| 12 | Supply of Grease |
| 13 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries ,Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 14 | a. Forged Steel |
| 15 | Plumber Block/Pillow Block/Bearing Housing (FG 400) |
| 16 | Gear & Pinion (Cast steel) |
| 17 | EM Brake |
| 18 | Bush (C I) |
| 19 | Rotary Limit switch |
| 20 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) |
| 21 | (a) In roof: with 0.80 mm. sheets. |
| 22 | (ii) In wall:-with 0.80 mm. sheets. |
| 23 | Supplying, fitting, fixing of ss(AISI304) bolts with nuts, washer: Dia 10mm to 20mm (b)Length above 75 mm and upto 150 mm. |
| 24 | Supplying, fitting, fixing of ss(AISI304) bolts with nuts, washer: Diaabove 20mm (b)Length above150 mm. |
| 25 | Supply & fitting fixing of round strand (steel core/fibre core) steel wire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensile designation as per IS‐2266 (make: Usha Martin, Bharat Wire Ropes ltd or BIS approved makes), rope clamp with Dishakle and fitting fixing of said material with correct alignment and position inclusive of all cost of labour, T&P, scaffolding charges & all other incidental charges as necessary to complete the job in all respect upto the satisfaction of E.I.C.g) 18 mm dia (steel core) |
| 26 | Dismantling of following items of rope drum hoisting system for replacement by new one as mentioned below as per direction including cost of Materials, Machinaries , Manpower, T & P and all overheads with all leads and lifts complete as per specification.Rope Clamp |
| 27 | Cost for supplying and fitting fixing ofbulb/musical node/J- type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. b) solid bulb: size- 40Ø 140 X 12 mm |
| 28 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC |
| 29 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 30 | Transportation charges ( by TATA 407 or equivalentvehicle of 4 ton capacity considered suitable for entry at site) forreturn ofold unserviceable materials from site. Including loading & unloading, to & fro handling etc.( 02 trips considered for 4 ton capacity vehicle) |
| 31 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation o f surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 32 | Painting of Gates of Distributory/Branch/Minor canal/ Pump Coloum pipe/Pump Discharge Pipe & other similar components prepared surfaces with one coats of zinc phosphate primer (airless spray preferred) 50microns/coat and one coat coaltar epoxy, 150 microns/coatincluding cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 33 | Servicing/ overhauling of Driving Motor 2HP/3HP, Heat burnishing ot achieve desire IR value with all rectifications/replacement of damaged bearings, alignment checking, connections and terminal wires as per the desired standard and to the satisfaction of E.I.C |
| 34 | Inspection Checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of EIC. |
| 35 | Supply of 6A Piano key type Switch |
| 36 | Supply of 1.5 sq.mm \"FR\" stranded Copper Wire |
| 37 | Supply of 15A flushed type 3 pin Plug Socket |
| 38 | 16SWG MS Box (250X250X65mm) 10\"x10\"x2.5 |
| 39 | Supply TMC501 Conventional industrial batten Philips LED tube, model no : TMC 501 P 1xT-LED 22W P3241 with 1no Mas LEDtube 1200mm 18W865 T8 I – 2100lm including necessary connection. |
| 40 | Supplying of approved make high speed ceiling fan (ISI marked) of following sizes having double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts / 1200mm |
| 41 | MCB 6-32 A, TP ,Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection.(make-Legrand) |
| 42 | MCB 6-32 A, SP ,Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection |
| 43 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. |
| 44 | Supply of 3 pole power contactor type MNX25, 25A current rating |
| 45 | Supply of 3 pole Thermal over load Relay type MN-2,A Relay range 9A to 15A current rating( 4.5 to 7.5A) |
| 46 | Supply of moving iron type analog AC ammeter (accuracy class 1.5), model-SMI-96 of following range 0 to 30A (0 to 15 A) |
| 47 | Supply of 22.5 mm dia LED indicating lamps |
| 48 | Supply of 22.5 mm Hole Dia Mushroom Type Push Button switch |
| 49 | 2NO + 2 NC Add on Auxlary contact Block L & T Make. (Model no-CS941114) |
| 50 | Supply of 0 to 600V range moving iron type analog AC voltmeter (accuracy class 1.5), model-SMI-96 |
| 51 | Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint |
| 52 | One coat of red lead/Zinc chromate priming |
| 53 | 1st coat of synthetic enamel paint over the primer |
| 54 | 2nd coat of synthetic enamel paint over the 1st coat |
