Construction Of 1 X 12 Mtr Span Joist Bridge At Kulkuli Hat Over Balujhora River At Uttar Haldibari And Pukhurigram Mouza Of Kumargram Gp Under Kumargram Block Within Alipurduar District
Tender Value
44.05 Lakhs
Estimated cost
Bid Submission
07 Jul 2025
0 days left
EMD
88102
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumargram → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 1 X 12 Mtr Span Joist Bridge At Kulkuli Hat Over Balujhora River At Uttar Haldibari And Pukhurigram Mouza Of Kumargram Gp Under Kumargram Block Within Alipurduar District
BOQ
| Sl. No. | Item Description |
| 1 | Cost of R.S. J., angle, MS plate etc supplied at site including all charges.a) R.S.J. 500mmx200mm |
| 2 | Cost of R.S. J., angle, MS plate etc supplied at site including all charges.b)200mmx100mm H pile |
| 3 | Cost of R.S. J., angle, MS plate etc supplied at site including all charges.c) Chanel 250mmx80mm |
| 4 | Cost of R.S. J., angle, MS plate etc supplied at site including all charges.d) 100mmx50mmx8mm MSChannel |
| 5 | Cost of R.S. J., angle, MS plate etc supplied at site including all charges.e) 10mm thick plate |
| 6 | Driven vertical Steel piles of required diameter and required length (length to be measured from the bottom of raft / Pile Cap to the bottom of shoe) including cost of all materials and labour for casting, hoisting, driving etc. and also including cost of dummy lengths of pile and of hire charges of all instruments as necessary but excluding reinforcement complete as per drawing and & Technical Specification.b)200mm x 1000mm H pile |
| 7 | Labour for M.S. work in Rolled steel joists, channels, angles. Tees, plates etc. including hoisting, placing in position including providing staging and removing after completion of works and cutting to sizes as required. |
| 8 | M. S. work in fabrication (including cutting to size, forging, drilling holes, welding, riveting, bolting to make built up steel girder or plate girder includingstiffener, bracing ties etc. all complete, excluding the cost of steel members or plates but including the cost of bolts, nuts, rivets, welds etc.), transporting to site, hoisting and placing in position all complete. |
| 9 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge |
| 10 | Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone,both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & einforcement works.FoundationM-15 Grade using concrete mixture foundation |
| 11 | Plain / Reinforced Cement Concrete in open foundation with coarse aggregates of appropriate nominal size and grading, fine aggregate(sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in- Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technicalspecifications. RCC Grade M20I. Using Concrete Mixer in foundation |
| 12 | Supplying, fitting and placing uncoated HYSD bar reinforcement in Bridge foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications. ( Details in bill) foundation |
| 13 | Plain / Reinforced Cement Concrete in Sub structure with coarse aggregates of appropriate nominal size and grading, fine aggregate(sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in- Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technicalspecifications. RCC Grade M20I. Using Concrete MixerSub structure Substructure |
| 14 | Supplying, fitting and placing HYSD bar reinforcement in Bridge sub structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications. ( Details in bill) sub structure |
| 15 | Furnishing and Placing Reinforced / Prestressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in- Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technicalspecifications.RCC Grade M25 I. Using Concrete Mixer |
| 16 | Supplying, fitting and placing HYSD bar reinforcement in Bridge Super-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications. ( Details in bill) |
| 17 | Earthwork in excavation from borrow pits (land owned/arranged by the Contractor) and depositing in layers of 250 mm. including breaking clods in embankment works and to fill up back of abutments, depressions and ruts with an initial lead up to 50 m and initial lift up to 1.5 m making bunds at top as directed dressing complete. (Borrow pit measurement) ii). Within a lead upto 1000 m(Details to be in bill) |
| 18 | Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. |
| 19 | Painting the vertical faces of posts wheel guards or railing or parapet with alternate band of different colours as directed by EIC with approved synthetic enamel paint |
| 20 | Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg each. |
| 21 | Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing ofthe first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering, making hole in ground of 47cm depth |
| 22 | Providing and fittingConcrete Sign Board as per IRC specification of size 900x750x37 mm thick made with RCC 1:1.5:3 withN.B. variety stone chips reinforced with duble layer IRC febric (75x75 mm mesh) and fixed with necessary nuts & bolts on two RC precast posts 100mm x150 mm of height 2.65 m of which top 750 mm is of 100 x13 mm and 1.90 m above GL & 0.75 m below GL including digging hole, repacking the same with cement concrete 1:3:6 with local stone chips etc. complete including painting two coats on noth faces lettering sign marks etc. as per direction of Engineer-in charge. |
| 23 | Add GST @ 18% |
| 24 | Add Labour welfare Cess @ 1% |
AI Tender Summary
Tender Timeline
Jun 23, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender