Miscellaneous Civil Work Of Tibari At Hanumanji Badi Bakhar,Nathdwara - 1 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto live level above 30cm, thick walls in Cement Mortar 1:6 (1-Cement 6-Sand). Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cernent sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15, landings, balconies, shelves, chajjas, lintels, bands, plain windows silla staircases and spiral staircases etc. M20 grade Nominal Mix Desion Mix Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for Columns. pillars, posts and struta etc. Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for Suspended floors, roofs, landings, staircases, baloonies, girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel beam, plinth beam etc. Plaster on new surface on walls in carment sand mortar 1:4 including racking of joints etc. complete fine finish: 20 mm thick 5 6 7 Crazy marble stone flooring 20mm thick marble stone withblack or of specified colour topping including filling the gaps with coment marble chipe mix in proportion of 4:7 (4cement: 7 white black or white or black marble chips) siz from 1mm to 4mn by volume and under layer of 25mm thick cement concrete [1:2:4 graded stone aggregate 125mm nominal size) rubibing and polishing and cement slurry etc. complete in ordinary coment Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision: New Work Providing and flaxing Marble stone ficoring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement: 4) coarse sand) jointing with white cement mortar 1:2 (1 white 8 cement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete Rajnagar 1st uality/Ageria with light spots Above 3601 Cm2 Slabs 9 Providing and flaxing Granite stone slab mirror polished and machine edge out in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white ement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Stabs Jalore Grinding of existing floor with 60, 80, 120 and 360 No Carborundum stone including cost of wax polishing complete Extra for providing edge moulding to 15-18mm thick marble Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Marble work Full Edge moulding S&F following sizes (dia.) of ISI marked virgin material MMS IS:9537 PIII) PVC conduit along with ISI marked (IS:3419 1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product work refer Annexure A attached with this BSR 25 mm P & F 1.2 mm thick G. I./MS Sheet boxes duly finished with two coats of red oode and with earthing terminal of following sizes (nominal size) in recessed/surface as requined For additional technical parameters of product/work refar Annexure A attached with this BSR 1.2 mm thick GI boxus 175mm x 100mm x 60mm. P&F 1.2mm thick M.S. Recessed fan box, hexagonal round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side All as per pre approved by Engineer in charge For additional tochnical parameters of product/work refer Annexure A attached with this BSR Providing and fixing steel gate, grating, and grils made of Jangles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide P&F PVC Storage Tank ISI Marked (IS: 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.1. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hat & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge (External work) 25 mm nominal size P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make Gun-metal 25mm nominal bore. P&F Bib Cook (IS: 8931 Mark), Superior quality of approved make:C.P. Brass bib cock, Long body, 15mm nominal bore weight not less than 690 gm P&F Ball Cock (IS 1703 Mark) with Rod & PVC Ball complete Brass wt. Not less than 600 gm, 25mm.
