Tender For Repair N Renovation Of Various Items In Blood Bank Unit Of Old Bone N Joint Hospital, Barzulla, Srinagar.- 1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : of area of 3 sqm. and below 2 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 4 Providing and fixing of 50-literwater heater (geysers) Venus, Recold jaguar all equivalent incl. cost of dash fasteners with nuts and washers, complete. 5 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm 6 Providing and fixing of C.P Basin mixer of approved brand as per the directions of EIC. At site complete 7 Providing and fixing of 1.5 ton capacity hot & cold A.C of approved quality and brand (O-General) with all fittings complete as per the directions of EIC. At site complete job. incl.Stablizer./ AVR of approved make (complete job). 8 Providing and fixing of 19mm water-proof plyboard (ply to ply) for making almirah compartments incl. cost of sum mica(8mm thick) of commercial quality and adhesive complete job. 9 Centering and shuttering including strutting, propping etc. and removal of form work for: 10 Suspended floors, roofs, landings, balconies and access platforms. 11 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar 12 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 13 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) 14 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 15 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns etc. for mass concrete. 16 Providing and fixing of 100mm handles (for doors/windows) incl. all fitting complete job. 17 Providing and fixing of stainless steel butt hinge 125x64x1.90mm IS: 12817 complete job. 18 Brick work with F.P.S bricks of class designation 75 in superstructure upto floor V level in cement mortar 1:6 (1 cement:6 coarse sand) including cost and carriage of all materials involved upto site of work complete. 19 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm thick 20 Engagement of electrician for removing of old/damaged electric fittings wiring etc. all complete. 21 Providing and fixing of electric items, make ( havells / anchor) or equivalent make including necessary fittings , accessories etc complete . 22 light points 23 led bulb 12 watt 24 heating points 25 providing / fixing of exhaust fans of required size as per directions of Engineer inchargeat site complete. 18 x 18 26 engagement of labour for clearance of mulba and taking out exsisting panels . 27 Aluminium Door :P/F of aluminium powder coated doors consisting of aluminium sections 83.5mm x 45mm x 2mm vertical , top and middle horizontal members and bottom members of size 114.60 x 44.45 x 2mm thickness .Bottom upto 5 height will be provided with 12mm thick both side pre laminated particle board mentioned in item above and rest above provided with 5.5mm thick transparent float glass. doors to be provided with 100mm brass deadlock godrej make, hydraulic floor spring, heavy quality ISI marked with cover plate 100mm dia circular plate type handles ( 2nos) tower bolt of size 250 x 10 mm including cutting the floor etc complete as directed by the engineer in charge. 28 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. 29 P/F of PPR pipes complete with PR fittings and clamps including cutting and making g00d the walls (B-class ) 25 mm 30 P/F of PPR union in PPR pipes including cutting and threading the pipe cutting and making long screws etc complete. 25 mm 31 providing and fixing of accessories , fittings , bends etc or nominal diameter ( Prince pipes Class B ) angle valves etc . 32 Plain bend 75 mm 33 PVC pipe 75 mm 34 Floor trap 4 x 3 35 PVC Connections 36 Waste Pipe( flexible) 37 Angle Valve 38 T Joints 39 Providing /Fixing of wall mounted soap dispensers of approved quality and brand as per directions of site incharge 40 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 41 Carriage of differentmaterials from source to site of work 42 stone aggregateavg 15 km 43 sand avg 15 km
