Tender For Provn Of Fencing With Gate For Demarcation Of Technical And Domestic Area (Ph-I) At Af Stn Dinjan Under Ge (Af) Mohanbari
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
16 Jul 2025
0 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Fencing With Gate For Demarcation Of Technical And Domestic Area (Ph-I) At Af Stn Dinjan Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering ,and removing surplus soil to a distance n exc 50 m and making good surface in soft /loose soil complete all as specified and directed. |
| 2 | S&F for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but not 250 Sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed. |
| 3 | S&F for mild steel posts and struts in fencing and flat iron of any size including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 4 | M&L for TMT bars 10mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 5 | M&L for TMT bars 8 mm dia as in reinforcement and over upto 10 mm dia cut to length bend to shape as required including cranking as in stirrups and nibs (6 mm dia) complete all as specified and as directed. |
| 6 | M&L for cement concrete 1:3:6 type C2 (40 mm graded stone aggregate)in foundations, filling and mass concrete complete all as specified and directed. |
| 7 | Supply only chain link fencing made out of 3.15 mm dia galvanised iron wire of mesh 75 mm x 75 mm size made complete all as specified and directed. |
| 8 | Straining and fixing only chain link fencing to RCC posts fixed with MS flat and 4 Nos of 10 mm dia MS bars as including line wires,any mesh,size and type to any type of standards, rails, straining bolts,etc incl provn of binding wire complete all as specified and directed.Note: MS flat and MS bars to be measured and paid seperately. |
| 9 | M&L for Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mmspacingsand straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed. |
| 10 | M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | M&L for Mild steel screw bolts diameter of neck 11 to 15 mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10 cm long complete all as specified and directed. |
| 12 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preperation for newly steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 13 | Excavating in trenches, n. exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 14 | M&L for cement concrete type D2 1:4:8 (40mm graded agg) in foundations filling mass concrete complete all as specified and directed. |
| 15 | Form work to sides of concrete foundation, footing, bases of colums, raft and raft beams, slides and soffits (if any) of foundation andplinth beams, and similar work vertical or to batter rough finished surface of concrete complete all as specified and directed. |
| 16 | Formwork to sides of pillers, posts, struts, piers, columns and stanchions, square,rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed. |
| 17 | M&L for RCC M-25 (design mix) 20mm graded stone aggregate in foundation incl rafts, footing, foundation beams, plinth beam, bases of column etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 18 | M&L for RCC M-25 (20mm graded stone aggregate) design mix in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 19 | M&L for framed work such as framedandhungas gates ornamental and intricate design etc,includingpintlehinges, stops, hand-made sliding bolts, etc conforming to Fe-290.Gde-E-165 complete all as specified and directed. |
| 20 | M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n. exc 10 kg each brackets, Conforming to F-290, Gde-E-165 complete all as specified and directed. |
| 21 | M&L for mild steel roller of dia approx 100mm with guide roller and appropriate size of bearinghaving a load capacity min 300 kg of each complete all as specified and directed. |
| 22 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preperation for newly steel surfaces of any description over10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed. |
| 23 | Demolition of cement concrete(unreiforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 24 | M&L for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate)as in mud stop rounded or chamfered on edge complete all as specified and directed. |
| 25 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces and finished rough to receive wall finishes in cement mortar 1:4 complete all as specified and directed. |
| 26 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of any tint/ shade complete all as specified and directed. |
| 28 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed. |
| 29 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 30 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
AI Tender Summary
Tender Timeline
Jun 26, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender