Tender For Repair/Maintenance To Wooden Furniture At Lower Camp At Af Stn Udhampur Under Ge (Af) Udhampur, udhampur-Jammu And Kashmir

REPAIR/MAINTENANCE TO WOODEN FURNITURE AT LOWER CAMP AT AF STN UDHAMPUR UNDER GE (AF) UDHAMPUR; WOODEN FURNITURE :Taking down worned out components of the following furniture items, S&F new component without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge 2 BED PLYTOP WOODEN (FD 246/247), 3 Head rest complete 4 Foot Rest complete 5 Long rail 6 Short rail 7 Stiffener 8 Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw 9 12mm thick BWR Ply wood top in one piece 10 CHAIR DINING (FD-203/279) 11 Rear Leg 12 Front Leg 13 Side rail with holes for weaving 14 Front/back rail with holes for weaving 15 Bottom stiffener 16 Back stiffener 17 Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 18 PVC Shoe as per sample approved 19 Chair Dining for JCO/OR FD/MAP-II/05 20 Rear Leg 21 Front Leg 22 Side rail with arrangement for fixing of PVC Sheet 23 Front/back rail with arrangement for fixing of PVC Sheet 24 Bottom stiffener 25 Back stiffener 26 PVC seat of Make : Amko/Cello as approved by Enginner-in-Charge 27 Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 28 PVC Shoe as per sample approved 29 TABLE DRESSING GENTS(FD-230/379) 30 Looking glass complete with frame and back plywood. 31 Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom 32 Knob as per sample approved 33 CHAIR WRITING (FD-261/280) 34 Rear legs 35 Front Legs 36 Side rail with holes for weaving (spacing of holes shall be as per old one) 37 Front/back rail with holes for weaving (spacing of holes shall be as per old one) 38 Bottom stiffener 39 Back stiffener 40 Arm rest 41 Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 42 PVC Shoe as per sample approved 43 CHAIR WRITING Cushioned FD-1107 44 Rear legs 45 Front Legs 46 Side rail 47 Front/back rail 48 Bottom stiffener 49 Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick ply 50 Arm rest 51 Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 52 PVC Shoe as per sample approved 53 PEG TABLE MAP, (FD/E6/MAP/11) 54 Legs 55 Long rail 56 Short rail 57 Side stiffener 58 Provn of wooden Triangularbracket of size 75x75x20mm at joint of leg and rail of peg table made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge 59 Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 60 PVC/Rubber Shoe as per sample approved 61 CHAIR EASY(FD-229) 62 Rear Leg 63 Front Leg 64 Side Rail 65 Front/Back Rail 66 Arms rest 67 PVC Shoe as per sample approved 68 TEAPOY (FD-278/382) 69 Legs 70 Long rail 71 Short rail 72 Side stiffener 73 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 74 PVC Shoe as per sample approved 75 Provn of wooden tringular bracket of size 75x75x30mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 76 PEG TABLE (FD-236/277/384) 77 Legs 78 Long rail 79 Short rail 80 Side stiffener 81 Provn of wooden tringular bracket of size 75x75x20mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 82 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 83 PVC Shoe as per sample approved 84 Table writing(FD-275) 85 Legs 86 Long rail 87 Short rail 88 Bottom centre stiffener 89 Bottom side stiffener. 90 Side of the box out of 18mm thick prelaminated particle board 91 Back of the box out of 6mm thick one side teak face commercial plywood. 92 Drawer as specified in drawing 93 Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 94 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 95 PVC Shoe as per sample approved 96 TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284) 97 Legs 98 Long Rail 99 Short Rail 100 Bottom Side stiffener 101 Bottom Centre stiffener 102 Drawer as specified in drawing 103 Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 104 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 105 PVC Shoe as per sample approved 106 TABLE DINING 06 PERSON( FD-239/273) 107 Legs 108 Long rail 109 Short rail 110 Stiffener 111 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 112 Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 113 PVC Shoe as per sample approved 114 TABLE DINING 04 PERSON( FD/MAP/09) 115 Legs 116 Long rail 117 Short rail 118 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 119 Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge 120 PVC Shoe as per sample approved 121 TABLE DINING 08 PERSON( FD-239/273) 122 Legs 123 Long rail 124 Short rail 125 Stiffener 126 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 127 Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge 128 PVC Shoe as per sample approved 129 Table 2 x 2 130 Legs 131 Long rail 132 Short rail 133 Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 134 Provn of wooden tringular bracket of size 75mm x 75mm to made out of 35mm thick hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge 135 PVC/Rubber Shoe as per sample approved 136 Sofa Set 5 Seater (TP)Removal of unserviceable seat and back rexine cloth/ taperstry cloth of (250 GSM) and cushion of Sofa set 5 seater and S & F with new cushion 100mm thick of polyurethane foamdensity 40 Kg/ Cum (40 density) Make of foam Dunlop / sleepwell/ Kurlon covered with new fabric of acrylic / polyester / polypropyleneof rexine cloth / new tapestry clothof approved make / shade duly providing quality all as specified and shown in drawing and as directed by Engr-in-charge 137 As per item No. 18.00 above but for Sofa set singleseater 138 SIDE BOARD (FD-241/371) 139 Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top 140 Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top 141 Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top 142 Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom 143 Shutter made of 18mm thick prelaminated particle Board with hinges 144 Back made of 6mm thick commercial plywood. 145 Bottom frame with 4 Nos of legs shall be made of Ist class hard wood 146 Knob as per sample approved 147 TABLE CENTRE (FD-274/375) 148 Leg 149 Long rail 150 Short rail 151 Side stiffener 152 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 153 Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge 154 PVC Shoe as per sample approved 155 Book Case Small FD-237 156 Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top 157 Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top 158 Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top 159 Shutter made of 18mm thick prelaminated particle Board with hinges 160 Back made of 6mm thick commercial plywood. 161 Bottom frame with 4 Nos of legs shall be made of Ist class hard wood 162 Knob as per sample approved 163 Benck Wksp All type 164 Legs 165 Long rail 166 Short rail 167 Stiffener 168 Top Plank size 1800mm x 255mm x 25mm to Foam with back made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) 169 PVC Shoe as per sample approved 170 TABLE 900mm x 900mm (FD-291) 171 Legs 172 Rail 173 Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge 174 Provn of wooden tringular bracket of size 75mm x 75mm made out of 35mm thick hard wood and shall be fixed as directed by Engineer-in-Charge 175 PVC Shoe as per sample approved 176 Bin linen multipurpose FD/E6/MAP/09 177 Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top 178 Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top 179 Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top 180 Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom 181 Shutter made of 18mm thick prelaminated particle Board with hinges 182 Back made of 6mm thick commercial plywood. 183 Bottom frame with 4 Nos of legs shall be made of Ist class hard wood 184 Handle SS as per sample approved 185 Hat Stand with Mirror (FD-FD-233/361/FD-362) 186 5mm thick Mirror of size 300mmx440mm . 187 4mm thick commercial plywood for back 188 Stainless steel MS pegswith screw as per sample approved 189 SOFA SET (FD-281/373/1113/FD/MAP-II/02) 190 Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell/ Kurlon duly covered with best quality tapestry clothof250 (GSM)as approved by Engineer-in-Charge complete all as directed and specifiedNote:-Rate of tapestry cloth shall not be less than Rs 450/- per RM 191 Table Bedside (FD/E-6/MAP/15 (R)/ FD/MAP/01 192 Top made of 18mm thick prelaminated particle board 193 Side 18mm thick prelaminated particle board 194 Back ply of 6mm thick commercial plywood of existing shape & size 195 Drawers as specified 196 Stainless steel Handle 100mm long 197 Telescopic channelof good quality. 198 TABLE DRESSING LADIES INCL STOOL(MAP) (FD/MAP-II/07) 199 5mm thick Mirror of size as per drawing with Back ply of 6mm thick commercial plywood 200 Sliding glass shutter of 3mm thick as per existing size. 201 Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated particle board as per existing shape and size with telescopic channel 202 Foam cushion 75mm, 40 density covered with fabric on seat to be fixed on 12mm thick plywood on stool as per existing shape and size 203 Wheel at the bottom of stool as per existing shape and size 204 RE-CANNING OF CHAIRS : Re-canning of wooden chairs as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane.Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge. 205 Sofa Set 3/4/5 Seats FD 281/373/1113 /FD/MAP-II/02Supply wood and fixing of the fwg new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak woodwith screw/bamboo pins only of the sofa complete all as specified in drawing & directed by Engineer-in-charge. 206 Front legs for three/single seater sofa 207 Rear legs for three/single seater sofa 208 Long front & Back rail for three seater sofa 209 Long front & Back rail for single seater sofa 210 Stiffner for three/single seater sofa 211 Side short rail for three/single seater sofa 212 Arms rest for three /single seater sofa. 213 plywood 10mm for three seater sofa. 214 plywood 10mm for single seater sofa. 215 Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture itemswheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required. 216 Bed Plytop wooden - FD 246 217 Chair Dining FD-228/270/279 218 Chair Writing FD/261/280 219 Chair Easy FD-229 220 Chair Dining for JCO/OR FD/MAP-II/05 221 Teapoy (FD-278/382) 222 Peg Table (FD-236/277/384) 223 Table Writing (FD-275) 224 Table 900x600mm with drawer/without drawer 225 Table Dining 6 presons (FD-239/273) 226 Table Dining 8 presons (FD-239/273) 227 Side Board (FD-241/371) 228 Table Centre FD-274/375) 229 Book Case (FD-147) 230 Hat Stand with Mirror (FD-FD-233/361/FD-362) 231 Sofa Single Seater 232 Sofa Set 4 Seater (FD-281/373) 233 Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02) 234 TABLE 900mm x 900mm (FD-291) 235 Table 2 x 2 236 Bin linen multipurpose FD/E6/MAP/09 237 Chair writing Cushioned FD-1107 238 TABLE DINING 04 PERSON( FD/MAP/09) 239 Benck Wksp All type 240 PEG TABLE MAP, (FD/E6/MAP/11) 241 CHARPOY IP WITH PLYTOP (FD/MAP-II/01) complete all as specified and directed by Engineer-in-charge.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	01-07-2025	CERTAIN CHANGES IN TENDER DCOUCS	BOQ	17-07-2025
2	27-06-2025	CERTAIN CHANGES IN REFERENCE NO AND TENDER TITLE	Other	17-07-2025

INR 500 /-

INR 30000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB