Public Administrative Department Local Bodies Closing in 0 days TDR #49833062

Installation Of N-Treat Based In-Situ Nallah Treatment For Port Blair Municipal Council - Drains In Prothrapur And Garacharma Area (I. Hollow Block Via Karan Trading Drain, Ii. Jail Complex Drain, Iii. Kali Mandir Drain, Iv. Co-Operative Colony Drain And

Issued by Local Bodies · prothrapur, Andaman And Nicobar Islands
Tender Value
5.51 Crore
Estimated cost
Bid Submission
24 Jul 2025
0 days left
EMD
11.02 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
prothrapur → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Installation of N-Treat Based In-Situ Nallah Treatment for Port Blair Municipal Council - Drains in Prothrapur and Garacharma Area (i. Hollow Block via Karan Trading Drain, ii. Jail Complex Drain, iii. Kali Mandir Drain, iv. Co-operative Colony Drain and v. Garacharma School Drain).

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Jul-2025 Time Extension Date 24-Jul-2025

BOQ

Name of Work: Installation of N-Treat Based In-Situ Nallah Treatment for Port Blair Municipal Council - Drains in Prothrapur and Garacharma Area (i. Hollow Block via Karan Trading Drain, ii. Jail Complex Drain, iii. Kali Mandir Drain, iv. Co-operative Colony Drain and v. Garacharma School Drain).
Sl. No. Item Description
1Prothrapur Area (i. Hollow Block via Karan Trading Drain)
2Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
3Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge.
4Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock
5Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Hard rock (blasting prohibited)
6Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
775 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 40 mm nominal size
875 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Moorum
975 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 20 mm nominal size
10Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
11Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
12Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
13Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
14Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
15Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum
16Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
17Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
18Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
19Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
20Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
21Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
22Carriage of Materials by Mechanical Transport including loading,unloading and stacking with lead upto 02 Km.Excavated rock
23Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand).
2412 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
25Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
26Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
27U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
28uPVC coupler for UPVC drainage pipes 75 mm
29UPVC bend 87.5° 75 mm bend
30Providing and fixing 15 mm C.P. brass tap for disinfection
31Providing Manpower for fixing the assembly for disinfection Fitter (Grade 1)
32Providing, supplying and installing coarse screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade completeFrame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars: 40 mmCoarse Screen - 40 mm Opening
33Providing, supplying and installing fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.Frame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars: 10 mmFine Screen - 10 mm Opening
34Providing, supplying and installation of FRP gates with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame: 30 x 30 x 3 mm FPR Sheet: 10 mm ThickFRP Gates
35Providing, supplying and installation of FRP Baffle with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame : 30 x 30 x 3 mm FPR Sheet : 6 mm ThickFRP Baffle
36Providing and supplying Bio-Curtain treatment units as per specification provided by IIT Bombay including cutting and fixing of coconut coir rope on MS square pipe of size 30 x 30 x 3 mm completeBio-Curtain Treatment Unit
37Providing and supplying Bio-Mat treatment units as per specification provided by IIT Bombay including cutting and fixing of PVC Plastic mesh into cylindrical shape, filling of coconut coir and fixing Bio-Mat on MS square pipe of size 30 x 30 x 3 mm etc. completeBio-Mat Treatment Unit
38Providing and supplying Floating Beds treatment unit as per the specification provided by IIT Bombay. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Floating Beds
39Providing, supplying and application of Bio-Culture, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Note: Bio-culture solution of 1% concentration shall be used for dosing in floating beds.Bio-Culture - 1% Conc.
40Providing, supplying and application of Growth Hormone, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited). Note: Growth Hormone solution of 1% concentration shall be used for dosing in floating bedsGrowth Hormones - 1 % Conc.
41Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
42Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm dia. R.C.C. pipe
43Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
44Operational and Maintenance Works of the N-Plant at Prothrapur Area (i. Hollow Block to Karan Trading Drain).
45Prothrapur Area (ii. Jail Complex Drain).
46Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
47Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge.
48Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock
49Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Hard rock (blasting prohibited)
50Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
5175 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 40 mm nominal size
5275 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Moorum
5375 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 20 mm nominal size
54Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
55Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
56Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
57Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
58Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
59Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum
60Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
61Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts
62Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
63Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
64Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
65Carriage of Materials by Mechanical Transport including loading,unloading and stacking with lead upto 02 Km.Excavated rock
66Providing, supplying and installing coarse screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specificationFrame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars: 40 mmCoarse Screen - 40 mm Opening
67Providing, supplying and installing fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specificationFrame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars: 10 mm Fine Screen - 10 mm Opening
68Providing, supplying and installation of FRP gates with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame: 30 x 30 x 3 mm FPR Sheet: 10 mm ThickFRP Gates
69Providing, supplying and installation of FRP Baffle with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame: 30 x 30 x 3 mm FPR Sheet: 6 mm ThickFRP Baffle
70Providing and supplying Floating Beds treatment unit as per the specification provided by IIT Bombay. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Floating Beds
71Providing, supplying and application of Bio-Culture, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Note: Bio-culture solution of 1% concentration shall be used for dosing in floating beds.Bio-Culture - 1% Conc.
72Providing, supplying and application of Growth Hormone, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited). Note: Growth Hormone solution of 1% concentration shall be used for dosing in floating bedsGrowth Hormones - 1 % Conc.
73U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
74uPVC coupler for UPVC drainage pipes 75 mm
75UPVC bend 87.5° 75 mm bend
76Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :100 mm dia. RCC pipes
77Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
78Operational and Maintenance Works of the N-Plant at Prothrapur Area (ii. Jail Complex Drain).
79Garacharma Area (iii. Kali Mandir Drain)
80Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
81Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
8275 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Moorum
8375 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 40 mm nominal size
8475 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 20 mm nominal size
85Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
86Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
87Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
88Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum
89Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
90Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
91Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
92Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
93Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand).
9412 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
95Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
96Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
97U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
98uPVC coupler for UPVC drainage pipes 75 mm
99UPVC bend 87.5° 75 mm bend
100Providing and fixing 15 mm C.P. brass tap for disinfection
101Providing Manpower for fixing the assembly for disinfection Fitter (Grade 1)
102Providing, supplying and installing Coarse fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade completeFrame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars: 40 mmCoarse Screen - 40 mm Opening
103Providing, supplying and installing Coarse fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.Frame work: Pipe Section 50 x 50 x 3 mm, Vertical bars: Square Bar 12 mm Dia. Spacing between vertical bars : 10 mmFine Screen - 10 mm Opening
104Providing, supplying and installation of FRP gates with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame: 30 x 30 x 3 mm FPR Sheet: 10 mm ThickFRP Gates
105Providing, supplying and installation of FRP Baffle with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame: 30 x 30 x 3 mm FPR Sheet : 6 mm ThickFRP Baffle
106Providing and supplying Bio-Curtain treatment units as per specification provided by IIT Bombay including cutting and fixing of coconut coir rope on MS square pipe of size 30 x 30 x 3 mm.Bio-Curtain Treatment Unit
107Providing and supplying Bio-Mat treatment units as per specification provided by IIT Bombay including cutting and fixing of PVC Plastic mesh into cylindrical shape, filling of coconut coir and fixing bio mat on MS square pipe of size 30 x 30 x 3 mm etc. completeBio-Mat Treatment Unit
108Providing and supplying Floating Beds treatment unit as per the specification provided by IIT Bombay. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Floating Beds
109Providing, supplying and application of Bio-Culture, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Note: Bio-culture solution of 1% concentration shall be used for dosing in floating beds.Bio-Culture - 1% Conc.
110Providing, supplying and application of Growth Hormone, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited). Note: Growth Hormone solution of 1% concentration shall be used for dosing in floating bedsGrowth Hormones - 1 % Conc.
111Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
112Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer-in-charge.Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
113Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :100 mm dia. RCC pipes
114Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
115Operational and Maintenance Works of the N-Plant at Garacharma Area (ii. Kali Mandir Drain).
116Garacharma Area (iv. Co-operative Colony Drain)
117Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
118Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge.Excavation in All Kinds of Soil
119Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock
120Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Hard rock (blasting prohibited)
121Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
12275 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 40 mm nominal size
12375 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Moorum
124Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
125Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns
126Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
127Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
128Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum
129Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete
130Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum
131Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
132Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
133Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
134Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
135Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
136Carriage of Materials by Mechanical Transport including loading,unloading and stacking with lead upto 02 Km.Excavated rock
137Carriage of Materials by Mechanical Transport including loading,unloading and stacking with lead upto 02 Km.Excavated Earth
138Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand).
13912 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
140Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
141Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
142U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
143uPVC coupler for UPVC drainage pipes 75 mm
144uPVC single equal Tee (without door) 75x75x75 mm
145UPVC bend 87.5° 75 mm bend
146Providing and fixing 15 mm C.P. brass tap for disinfection
147Providing Manpower for fixing the assembly for disinfection Fitter (Grade 1)
148Providing, supplying and installing Coarse screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade completeFrame work : Pipe Section 50 x 50 x 3 mm, Vertical bars : Square Bar 12 mm Dia. Spacing between vertical bars : 40 mmCoarse Screen - 40 mm Opening
149Providing, supplying and installing fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.Frame work : Pipe Section 50 x 50 x 3 mm, Vertical bars : Square Bar 12 mm Dia. Spacing between vertical bars : 10 mmFine Screen - 10 mm Opening
150Providing, supplying and installation of FRP gates with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame Pipe Size : 30 x 30 x 3 mm FPR Sheet : 10 mm ThickFRP Gates
151Providing, supplying and installation of FRP Baffle with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame Pipe Size : 30 x 30 x 3 mm FPR Sheet : 6 mm ThickFRP Baffle
152Providing and supplying Bio-Curtain treatment units as per specification provided by IIT Bombay including cutting and fixing of coconut coir rope on MS square pipe of size 30 x 30 x 3 mm.Bio-Curtain Treatment Unit
153Providing and supplying Bio-Mat treatment units as per specification provided by IIT Bombay including cutting and fixing of PVC Plastic mesh into cylindrical shape, filling of coconut coir and fixing bio mat on MS square pipe of size 30 x 30 x 3 mm etc. completeBio-Mat Treatment Unit
154Providing and supplying Floating Beds treatment unit as per the specification provided by IIT Bombay. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Floating Beds
155Providing, supplying and application of Bio-Culture, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Note: Bio-culture solution of 1% concentration shall be used for dosing in floating beds.Bio-Culture - 1% Conc.
156Providing, supplying and application of Growth Hormone, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited). Note: Growth Hormone solution of 1% concentration shall be used for dosing in floating bedsGrowth Hormones - 1 % Conc.
157Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
158Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
159Operational and Maintenance Works of the N-Plant at Garacharma Area (iv. Co-operative Colony Drain)
160Garacharma Area (v. Garacharma School Drain)
161Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
162Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge.Excavation in All Kinds of Soil
163Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
16475 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Moorum
16575 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 40 mm nominal size
16675 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :Stone aggregate 20 mm nominal size
167Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
168Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
169Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
170Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishingand reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M30 grade with minimum cement content of 350 kg /cum
171Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers
172Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
173Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform
174Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
175Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
176Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. - 2.5
177Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand).
17812 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
179Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
180Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
181U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia
182UPVC bend 87.5° 75 mm bend
183uPVC coupler for UPVC drainage pipes 75 mm
184Providing and fixing 15 mm C.P. brass tap for disinfection
185Providing Manpower for fixing the assembly for disinfection Fitter (Grade 1)
186Providing, supplying and installing Coarse fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade completeFrame work : Pipe Section 50 x 50 x 3 mm, Vertical bars : Square Bar 12 mm Dia. Spacing between vertical bars : 40 mmCoarse Screen - 40 mm Opening
187Providing, supplying and installing Coarse fine screen fabricated using rectangular hollow steel section as per the detailed design and drawing provided with the following specification including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.Frame work : Pipe Section 50 x 50 x 3 mm, Vertical bars : Square Bar 12 mm Dia. Spacing between vertical bars : 10 mmFine Screen - 10 mm Opening
188Providing, supplying and installation of FRP gates with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame : 30 x 30 x 3 mm FPR Sheet : 10 mm ThickFRP Gates
189Providing, supplying and installation of FRP Baffle with supporting structure in MS steel section as per the design and drawing provided with following specificationNotes: Steel Work for Frame : 30 x 30 x 3 mm FPR Sheet : 6 mm ThickFRP Baffle
190Providing and supplying Bio-Curtain treatment units as per specification provided by IIT Bombay including cutting and fixing of coconut coir rope on MS square pipe of size 30 x 30 x 3 mm.Bio-Curtain Treatment Unit
191Providing and supplying Bio-Mat treatment units as per specification provided by IIT Bombay including cutting and fixing of PVC Plastic mesh into cylindrical shape, filling of coconut coir and fixing bio mat on MS square pipe of size 30 x 30 x 3 mm etc. completeBio-Mat Treatment Unit
192Providing and supplying Floating Beds treatment unit as per the specification provided by IIT Bombay. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Floating Beds
193Providing, supplying and application of Bio-Culture, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited).Note: Bio-culture solution of 1% concentration shall be used for dosing in floating beds.Bio-Culture - 1% Conc.
194Providing, supplying and application of Growth Hormone, as specified by Engineer-in-charge. The item shall be procured from IIT Bombay exclusive technology provider – SINE IIT Bombay Company (EMERGY Enviro Private Limited). Note: Growth Hormone solution of 1% concentration shall be used for dosing in floating bedsGrowth Hormones - 1 % Conc.
195Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
196Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer-in-charge.Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
197Operational and Maintenance Works of the N-Plant at Garacharma Area (v. Garacharma School Drain)

AI Tender Summary

OUR REF NO 49833062
AUTHORITY Local Bodies
TENDER VALUE 5.51 Crore
LAST DATE 24-07-2025
Authority
Authority Name Municipal Council
Work Description Installation of N-Treat Based In-Situ Nallah Treatment for Port Blair Municipal Council - Drains in Prothrapur and Garacharma Area (i. Hollow Block via Karan Trading Drain, ii. Jail Complex Drain, iii. Kali Mandir Drain, iv. Co-operative Colony Drain and v. Garacharma School Drain).
Basic Detail
Tender No 04/EE-III/SWM/MC/2025-26
Bidding Type Tender
Location
City prothrapur
State Andaman And Nicobar Islands
Key Dates
Publish Date 17 Jul 2025
Submission Date 24 Jul 2025
Open Date 24 Jul 2025
Finance
Tender Value 5.51 Crore
Tender Fee Ref. Documents
EMD 11.02 Lakhs
Exemption Not Available
Document List
623635d0-fc64-49f6-8490-87243cffa65e.html
BOQ_20142.xls
Document.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 24, 2025
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 24, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 24, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

623635d0-fc64-49f6-8490-87243cffa65e.html

xls

BOQ_20142.xls

pdf

Document.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders