Construction Of Gdc Majalta (Purchase Of College Furniture). Please Refer To Boq , Manufacturing,Providing & Placingin Position Machine Factory Assembled Cabin Office Table With Side Unit With Following Details And Specifications : Top And Legs Are Made Of 38 Mm Thick Mdf (E-1 Grade), Finish With Matching 2 Mm Pvc Edge-Banding. The Modesty Panel Is Made Of Prelam Particle Board Grade E-1 (Environmental Friendly) Of Thickness 18 Mm Mdf With Edge-Banding(Pvc) 2 Mm. Drawer Unit :3 Drawer Melamine Finish Pedestal Of Overall Dimensions Internal And External Dimensions 380-430 Mm (W) X 430-480 Mm (D) X 600-620 Mm ( H). Drawer Should Be Made Of 18Mm Thick E1 Grade Particle Board. Each Pedestal Should Have 5 Nos Castor Fitted To It Where In One Castor Will Be Fitted To Lower Most Drawer To Provide Extra Stability. E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1892). Low Height Backstorage:Body Of Storages Made Out 18 Mm Thick (E1 Grade) Mdf Board With Melamine Finish With Pvc Edge-Banding.All Shelves Are Adjustable.The Storage Should Have Extruded Aluminum Handle/ Recess Handle , As Per Requirement. Storages Should Be Provided With Adjustable Levelers. Door Lock Should Be Of Three-Way Lock Mechanism, The Hinged Doors Can Be Locked At Once. Door Should Be Provided With Hinge-Damping Mechanism To Enable Soft Closing Of Doors. E1 Grade Laminate To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Should Be Phenol Base With Emission Of Not More Than (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1892).Product Should Be Provided With 5 Years Warranty..Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Table Of Size - Main Table : 2100Mm X 1050Mm X 740Mm H Side Table Size- 1200Mm X 600Mm X 600Mm H , Low Height Back Storage Size - 2100Mm X 450Mm X 740Mm H , Manufacturing, Providing & Placing In Position Machine Made Factory Assembled Conference Table With Following Details And Specifications : Top And Legs Are Made Of 38 Mm Thick Mdf (E-1 Grade), Finish With Matching 2 Mm Pvc Edge-Banding. The Modesty Panel Is Made Of Prelam Particle Board Grade E-1 (Environmental Friendly) Of Thickness 18 Mm Mdf With Edge-Banding(Pvc) 2 Mm. Wire Management: Completely Concealed Wiremanagement With Aluminium Anodized Flipper With Soft Closure, Wiring Tray & Beams Made From Ms Sheet 2 Mm., Flange Structure Epoxy Powder 80-90 Microns Coated Spray Color, Baked At Temperature 200C With Vertical Wire Uptake From Floor Via Middle Leg Having Removable Cover. Wire Seperator For Data Provided In Cable Tray Below Fipper. The Profile Of Table Can Be U Shape/V Shape As Per The Space Available. E1 Grade Laminate To Be Used Which Provide No Urea Formaldehyde Emission And Formaldehyde Should Be Phenol Base With Emission Of Not More Than (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1892).Product Should Be Provided With 5 Years Warranty..Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller 18 Seater Closed Meeting Table Of Size :- 6600Mm (W) X 1500Mm (D) X 740Mm H , Providing And Supplying Front Student Dual Desk : Size Is 1340X468x980mm(Wxdxh).Leg Made In Oval Pipe 76X24x1.5Mm Thick Duly Powder Coated. Top Has Given Support Pipe 50X25x1.2Mm Thick.Desk Top Size Is 1340X450x25mm Thick Plpb Duly Edge Banded. Front Of The Desk Has Given 25Mm Thick Plpb Modesty. Base Plate Has Given In 8Mm Thick Crca Sheet. Middle Student Dual Desk : Size Is 1340X960x980mm(Wxdxh) . Leg Made In Oval Pipe 76X24x1.5Mm Thick Duly Powder Coated. Top Has Given Support Pipe 50X25x1.2Mm Thick.Seating Has Given Support Rectangle Pipe 80X40x2.5Mm.Seating Has Given Tip-Up Mechanism. Seat & Back Has Given In Leatherite Upholstery.Desk Top Size Is 1340X450x25mm Thick Plpb Duly Edge Banded. Base Plate Has Given In 8Mm Thick Crca Sheet. Handrest Has Given 2.5Mm Thick Crca Sheet Outer Has Plpb Board Cover. Last Student Dual Desk : Size Is 1340X510x980mm(Wxdxh). Leg Made In Oval Pipe 76X24x1.5Mm Thick Duly Powder Coated.Seating Has Given Support Rectangle Pipe 80X40x2.5Mm.Seating Has Given Tip-Up Mechanism.Seat & Back Has Given In Leatherite Upholstery. Base Plate Has Given In 8Mm Thick Crca Sheet. Handrest Has Given 2.5Mm Thick Crca Sheet & Outer Has Plpb Board Cover. Provided High Quality Cold Rolled Close Annealed(Crca) Sheet Anticorrosion Treated Components, Duly Power Coated With Ten Tank Phosphating Procedure With 60 To 70 Microns. , Manufacturing,Providing & Placing Sofa,In Position Machine Made Factory Assembled Sofas For Lobby & Waiting Area Of Follwoing Dimensions With The Following Specifications. Wooden Structure Of Sofa To Be Fabricated Using Good Quiality Hardwood Duly Seasoned And Applying Anti-Termite Paint Of Approved Brand & Manufacture To Ensure Stability Of The Frame, On The Wooden Base Frame Of The Sofa To Be Provided With M.S. Helical Spring, Sides & Back With Jute Strips, With Polyfill Covered With Jute & Finished With Thick Marking Cloth Before Doing Final Finished With Leathrite Have Basic Cost Not Less Than 1000/- Pet Mt. Seat - 40-45Kg/Cum Density Pu Foam, 100Mm Thick, Back - 35-40Kg/Cum Density Pu Foam, 60Mm Thick, Sides (Inside) - 40-45 Kg/Cum Density Pu Foam, 45 Mm Thick Sides (Outside) & Back (Back Side) - 35-40 Kgcum Density Pu Foam, 25Mm Thick. Seat Shall Rest On Ss Square Frame Of Size 25Mm X 25Mm Supported Solid Wooden Section Of Height 225Mm. All Ss Work Should Be In Grade 304. Base Of Sofa Should Be Infilled With Suitable Woode Sections So As To Give Proper Support To The Seat. Height Of The Base Of Sofa Shall Be 200-250Mm(Approx). Finished Width Of Arm Shall Be 100Mm After Upholstery Work. Sofa To Be Fully Upholstered Using Approved Leatherite Of A Grade Of Desired Shade Duly Embossed Including Providing & Fixing Of All Other Related Materials Including Hardwares Etc. Complete As Directed By The Engineer In Charge. Product Should Be Provided With 5 Years Warranty. .Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , 3 Seater Sofa Overall Dimension - 1800Mm W X640-680Mm D X 700-740Mm H,Seating Height 425Mm , 2 Seater Sofa Overall Dimension - 1590Mm W X640-680Mm D X 700-740Mm H,Seating Height 425Mm , Manufacturing.Providing And Fixing Tables On Position Machine Made Factory Assembled Centre & Corner Table For Lobby & Waiting Area Of Following Dimension With The Following Specifications.For Whose Top Is Made Of Particle Board Wood Grade E-1(Environmental Friendly), Thickness 25 Mm Cover With Melamine, Edge Banding (Pvc) 2Mm.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992).The Understructure Is Made Of Ss. .Product Should Be Provided With 5 Years Warranty. .Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Centre Table Size - 1200Mm W X 600Mm D X 400Mm H , Manufacturing,Providing And Placing In Position High Back Revolving Chair With Adjustable Headrest Backrest: The Outer Frame Of The Backrest Made Of Injection Moulded In Black 20% Glass Filled Polypropylene And Inner Frame Made Up Of Injection Moulded In Black Polypropylene. Inner Frame Upholstered With Mesh Fabric Then Assembled With Outer Frame. The Back Has Fix Lumber Support For Achieving Comfortable Seating Posture. Lumber Support Made Up Of Injection Moulded In Black P.P. Lumber Support Size 260 Mm (W) X 115 Mm (H). Backrest Size 580-590 Mm (H) X 445-455 Mm (W) & Headrest Ht: 220-320Mm. Spine Made Of Reengineered Black Nylon. Backrest Is Tested For Static Testing- 67Kg (Functional Load) & 102 Kg (Proof Loading) For 1 Min And Cyclic Testing- 57 Kg Loading For 1,20,000 Cycles And Will Comply To Ansi/Bifma X 5.1 Standards. Seat: He Seat Is Made Up Of 12 Mm Thick (7 Layers) Hot Pressed Plywood And Moulded Seat Foam Upholstered With Fabric. The Bottom Cover Made Up Of Injection Moulded In Black Pp To Cover The Plywood. Seat Size 460-470 Mm (W) X 460-470 Mm (D). Minimum And Maximum Seating Height Is 440 Mm And 540 Mm Respectively. Seat Foam:Foam Made Out Of Moulded Polyurethane Foam With The Following Properties. Average Thickness Of 65 Mm (Width- 460 Mm, Depth- 460 Mm) And With The Following Properties:Density: 52-55 Kg/M³ , Hardness: 25±/3 Kgf ,Compression Set: 10% Max ,Tensile Strength: 0.90 To 1.2 Kg/Cm² ,Resilience: 40%-60% ,Comfort / Indentation Hardness: 15.4 ,Weight: 650 Gms ,Armrest: 2D Adjustable Arm With Pu,:The Armrest Is Made Up Of Thermo Polyurethane With 40 - 55 Shore Hardness And Reinforced With 4 Mm Thick Nylon Insert. Arm Pad Size 235 Mm (L) X 80 Mm (W). The Handle Is Fitted To The Seat With Seat/Handle Connecting Strip Assembly Made Of 35% Glass Filled Nylon 20 Mm Thick. Adjustable Arm Rest With Height Adjustment Up To 70 Mm. Minimum And Maximum Height Of Armrest Is 265 Mm / 335 Mm Respectively. The Front And Back Movement Of Armrest Is 60 Mm. The Handle Is Tested For Static Testing-75 Kg Loading For 1 Min (Functional Load) And 103 Kg For 15 Secs (Proof Load) And Cyclic Testing- 41Kgs For 60,000 Cycles And Will Comply As Per Ansi/Bifma X 5.1. Standards. Mechanism: Single Point Locking: Conventional Mechanism With One Lever Control For Lock And Seat Height Adjustment. Mechanism Made Out Of Ms Plate Thickness Is 3 Mm And Seat’S Tilting Angle Is 3° - 10° And Back Tilting Angle Is 87° - 106°. Also, It Has The Back Tension Adjustment Knob. The Mechanism Has A Knob To Adjust The Back Tilt Tension And Is Tested For 300000 Cycles As Per Ansi/Bifma X 5.1. Following Are The Approved Mechanism Options To Use With The Chair. Gas Lift: Gas Lift Pipe Diameter Is 50 Mm And Has A Height Adjustment Stroke Of 112 Mm. Gas Lift Tested For 100000 Cycles As Per Ansi/Bifma X 5.1. Meets Din 4550 Class – 4 And All Applicable Ansi/Bifma, En Performance Standard. Nylon Base: The Base Is Injection Moulded In Black 35% Glass Filled Nylon And Fitted With 5Nos. The Base Is 660 Pitch Circle Diameter. The Base Is Tested For Static Load Of 1200 Kg. Castors: .60 Mm: The Twin Wheel Castors Are Injection Moulded In Nylon 35% Glass Filled And Diameter Of Castor Is 60 Mm. The Castors Are Tested For 100000 Cycles And Will Comply As Per Ansi/Bifma X 5.1 Standards. Fabric Properties: Content : 100% Polyester,Abrasion : 80,000,Flammability : Adheres To Bs En 1021-1 1994 (Cigarette),: Adheres To Bs 7176:1995 (Low Hazard) Color Fastness To,Light Adhere To : 5+ [Bs 1006 (1990)],Rubbing: Adhere To Dry: Class 5,Adheres To Wet: Class 4.5, Backrest Mesh Specification: Mesh With The Following Properties: Content: 100% Polyester Weight: 320 Glm Abrasion: 80000 Flammability: Bs En 1021-1 1994 (Cigarette) Bs 7176:1995(Low Hazard) Color Fastness To Light: 4.5+ [Bs 1006(1990)] Rubbing: Dry: Class 5 Wet: Class 4.5.Product Should Be Provided With 5 Years Warranty..Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Manufacturing,Providing And Placing In Position Medium Back Non Revolving Chair Backrest , Overall Chair Size: 445-460W X 450-470Dx 960Hmm ,Backrest: The Outer Frame Of The Backrest Made Of Injection Moulded In Black 20% Glass Filled Polypropylene And Inner Frame Made Up Of Injection Moulded In Black Polypropylene. Inner Frame Upholstered With Mesh Fabric Then Assembled With Outer Frame. The Back Has Fix Lumber Support For Achieving Comfortable Seating Posture. Backrest Size 590 Mm (H) X 420 Mm (W). Spine Made Of Reengineered Black Nylon. Backrest Is Tested For Static Testing- 67Kg (Functional Load) & 102 Kg (Proof Loading) For 1 Min And Cyclic Testing- 57 Kg Loading For 1,20,000 Cycles And Will Comply To Ansi/Bifma X 5.1 Standards.Seat: The Seat Is Made Up Of 12 Mm Thick (7 Layers) Hot Pressed Plywood And Moulded Seat Foam Upholstered With Fabric. The Bottom Cover Made Up Of Injection Moulded In Black Pp To Cover The Plywood. Seat Size 460 Mm(W) X 460 Mm (D). Minimum And Maximum Seating Height Is 460 Mm And 560 Mm Respectively.Seat/Back Foam:Foam Made Out Of Moulded Polyurethane Foam With The Following Properties. Average Thickness Of 65 Mm (Width- 460-470 Mm, Depth- 460-470 Mm) And With The Following Properties:Density: 52-55 Kg/M³ , Hardness: 25±/3 Kgf ,Compression Set: 10% Max ,Tensile Strength: 0.90 To 1.2 Kg/Cm² ,Resilience: 40%-60% ,Comfort / Indentation Hardness: 15.4 ,Weight: 650 Gms. Arm Rest & Handles: Adjustable Arms:The Armrest Is Made Up Of Thermo Polyurethane With 40 - 55 Shore Hardness And Reinforced With 4 Mm Thick Nylon Insert. Arm Pad Size 235 Mm (L) X 80 Mm (W). The Handle Is Fitted To The Seat With Seat/Handle Connecting Strip Assembly Made Of 35% Glass Filled Nylon 20 Mm Thick. Adjustable Arm Rest With Height Adjustment Up To 70 Mm. Minimum And Maximum Height Of Armrest Is 265 Mm / 335 Mm Respectively. The Front And Back Movement Of Armrest Is 60 Mm. The Handle Is Tested For Static Testing-75 Kg Loading For 1 Min (Functional Load) And 103 Kg For 15 Secs (Proof Load) And Cyclic Testing- 41Kgs For 60,000 Cycles And Will Comply As Per Ansi/Bifma X 5.1. Standards. Mechanism: Single Point Lock: Conventional Mechanism With One Lever Control For Lock And Seat Height Adjustment. Mechanism Made Out Of Ms Plate Thickness Is 3 Mm And Seat’S Tilting Angle Is 3° - 10° And Back Tilting Angle Is 87° - 106°. Also, It Has The Back Tension Adjustment Knob. The Mechanism Has A Knob To Adjust The Back Tilt Tension And Is Tested For 300000 Cycles As Per Ansi/Bifma X 5.1. Following Are The Approved Mechanism Options To Use With The Chair. Gas Lift:Gas Lift Pipe Diameter Is 50 Mm And Has A Height Adjustment Stroke Of 112 Mm. Gas Lift Tested For 100000 Cycles As Per Ansi/Bifma X 5.1. Meets Din 4550 Class – 4 And All Applicable Ansi/Bifma, En Performance Standard. Cantilever Base: Base Is Ms Powder Coated, 25Mm Dia Pipe Frame Leg. The Height Of The Frame Is 14.5 Inches And The Length Is 21 Inches. The Width Is 18 Inches(Min) And 20 Inches (Max).. Fabric Properties: Content : 100% Polyester,Abrasion : 80,000,Flammability : Adheres To Bs En 1021-1 1994 (Cigarette),: Adheres To Bs 7176:1995 (Low Hazard) Color Fastness To,Light Adhere To : 5+ [Bs 1006 (1990)],Rubbing: Adhere To Dry: Class 5,Adheres To Wet: Class 4.5, Backrest Mesh Specification: Mesh With The Following Properties: Content: 100% Polyester Weight: 320 Glm Abrasion: 80000 Flammability: Bs En 1021-1 1994 (Cigarette) Bs 7176:1995(Low Hazard) Color Fastness To Light: 4.5+ [Bs 1006(1990)] Rubbing: Dry: Class 5 Wet: Class 4.5. Product Should Be Provided With 5 Years Warranty. .Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Storwel Lockers Side :- 838(W) X 305(D) X 1675(H) Mm. Book Case Almirah Made In Crca Sheet. Steel Book Case Almirah Body & Shelves Made Of 22 Gauge Thick And Front Door 20 Gauge Thick Crca Sheett.Front Made Of 4 Transparent Glass Doors Of 5Mm Thickness Having Sliding Shutters. The Book Case Is Fitted With 6 Lever Brass Lock With Duplicate Ss Keys. Full Height Steel Upper Sliding Door To Be Provided.Steel D Type Handle To Be Provided Should Have Central 3 Way Locking Mechanism With Shooting Bolt Arrengement. Height Wise 3Nos Fixed Shelf To Be Provided With Uniformly Distributed Load Capacity Per Each Full Shelf Should 80Kg Maximum M10 Screw Type Leveler With Hex Plastic Base. With At Least 10 Tank Treatment Cleaned From Oil Grease, Dust And Other Dist. Autometic Spray Coating Shall Be Applied To Be Followed By Draying. Metal Pieces Shall Be Welded Properly Strongly,Co2 Welding Shall Be Used. All Metal Shall Be Coated After Being Treated. All Steel Components Are Pre Treated With Anti Rust Treatment And Duly Powder Coated Upt To 45-50 Microns..Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Providing And Placing In Position Single Bed Of Overall Size:-L-2050Mm X W-1060Mm X 880Mm H. Material:-Metal Understructure : C Type Frame & Cross Members Are Made Up Ofin 25X25x1.2Mm Thk Ms Square Pipe Conforms To Is 4923 And The Frame Finished Withpowder Coat Up To 50 -60 Micron . Horizontal Plinths And Bottom Plinth Are Made Of 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mmprov Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). Head Board/Tail Board/ Side Rail Board Are Made Of 18Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mmprov Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992) With Imported Hdf/ Membrane Foil Wrapped Decorative Trims Fixed To It. Mattress Panels Of Bed Are Made Of 18 Mm Thick 25Mm. Thick Particle Board (E-1 Grade), Melamine Finishes With Matched 2 Mmprov Pvc Edge-Banding.E1 Grade Laminate With Zero Urea Formaldehyde Emissions (<Or= 8Mg/100 G Oven Dry Board-Perforated Method) For Better In-House Quality. This Should Comply With (En 120-1992). Construction:-Knock Down Construction. Product Should Be Provided With 5 Years Warranty. .Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Providing And Placing In Position Branded Factory Made Mattress Of Approved Make Of Total Thickness 125 Mm And Size L-2050Mm X W-1060Mm. The Sandwich Construction Having Round Edge Corners With Bonded Foam (Density 100 Kg/M3) Of Thickness 75 Mm And Pu Foam (Density 32 Kg/M3) 25 Mm Thick On Both Sides With Premium Quality Printed Fabric Quilted On Both Sides. Product Should Be Provided With 5 Years Warranty. .Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller , Supplying And Placing Sofa Cum Bed Of Overall Width Of 1050Mm And Internal Of 900 Mm Depth And Expandable Upto 1950Mm. The Structure To Be Of Hard Wood And Ms Powder Coated For The Scissor Pull Out Mechanism With Is303 Ply As Required. The Cushion And Sofa Seat To Be Upholstered In The Velveet/Suede Fabric. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007, Bifmamembership And Aiota Certification. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12406 Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Test. The Colour Shall Be As Per Interior Design Consultant. Vendor To Submit Shop Drawings For Approval. , Providing And Placing In Position As Per The Direction Of Engineer Incharge.Wooden Podium, 750W)*500{D)*1150Mm{H| Approved Make: Haworth/Steelcase/ Delite Hi-Tech /Rockworth/Herman Miller
